Home

Showing 109-115 of 115 item(s)

RIVERTABLE WWB Hardener

eshop_000034/1

Hardener for casting epoxy resin for creating casts with a thickness of 0-7cm. For example, pouring wooden table slabs into so-called Rivertables, etc.\n\nExcellent UV stability, clarity, colorless with the possibility of tinting using dyes and pigments

Kč723.27

Thinner for epoxy spray gelcoat EG 100-W and EG 100-T

eshop_001047

Thinner for epoxy solvent-based coatings. An addition of 5-20% thinner will significantly change the viscosity of the gelcoat, making it suitable for spraying. A larger amount may significantly alter the properties of the cured gelcoat.

Kč500.72

Transparent Polyester Casting Resin

eshop_010288/1

It is a colorless, absolutely clear, accelerated, UV stabilized orthophthalic resin with low viscosity and reactivity. APPLICATION. Optimal curing only with Peroxide K1!! The transparent casting resin is primarily intended for applications where ext is required

Kč435.57

Tvrdidlo P 11 do EP 512, 531 a 371

eshop_001040

Hardener P 11 is used for curing epoxy resins in the construction industry, in the production of composites and adhesives. It is a flammable and corrosive liquid with a characteristic odor. The advantage of the hardener is its low mixing ratio, which significantly reduces costs for

Kč980.80

Two-component multipurpose adhesive Araldit AW 106(Araldit 2011)

eshop_001074/1

High-quality multipurpose adhesive with a longer processing time of approximately 120 minutes. Shear strength at 23°C (N/mm2), Tg 47°C, and operating temperature 80°C. Recommended hardener HV 953U and mixing ratio 100:80 by weight. Curing after 100 hours at 23°C.

Kč2,302.66

Vinylester Gelcoat NORPOL GM 60014 H - green molding

eshop_000020

The secret to smooth and professional molds for beautiful products. Suitable for molds laminated with polyester resin. You create the surface and details by accurately copying the model. It can be sanded and polished. Any repairs are easily feasible. Color green. dod

Kč691.79

Wax Solution 9872 3%

eshop_000033

It is used for the production of top-coats, serving to seal the final layer of the laminate as protection against UV radiation and water. The resin modified in this way does not stick after curing. 1-3% of the wax solution is added to the resin. Note, without sanding the release agent

Kč616.02

Product added to wishlist

Product added to compare.

iqitcookielaw - module, put here your own cookie law text