Home

Filter holder for 3M 501, 7500 chemical mask

Filter holder for 3M 501, 7500 chemical mask

eshop_010096
Plastic holders 501 for half mask 7500 are a necessary accessory for securing dust filters P2 to the basic carbon filters 6055A2 used with the chemical half mask.
Kč205.22
Filters for 3M 6055A2 chemical mask - chemical

Filters for 3M 6055A2 chemical mask - chemical

eshop_010094
Chemical filters A2 are very effective and reliably filter organic vapors, protecting you from inhalation. Think about your health before it's too late! For maximum filter lifespan, we recommend using dust pre-filters, which protect you and chemicals
Kč689.01
Flat Brush 2"

Flat Brush 2"

100036
Flat brush with a wooden handle width 2". The bristle length is 50 mm.
Kč12.33
FLO-KING Plastic Drum Tap - Large

FLO-KING Plastic Drum Tap - Large

eshop_010165/1
The polyethylene drain tap is suitable for draining larger quantities of materials from metal drums with a corresponding opening. In our offer, you will also find a smaller drain tap that is suitable for draining smaller quantities of material.
Kč1,125.16
FLO-RITE Plastic Drum Tap - Small

FLO-RITE Plastic Drum Tap - Small

eshop_010165/2
The polyethylene drain tap (small) is suitable for draining smaller quantities of materials from metal drums with the appropriate opening. In our offer, you will also find a larger drain tap that is suitable for draining larger quantities of material.
Kč137.99
FMS - pore filler

FMS - pore filler

eshop_002029/1
FMS is a pore filler for molds. It is suitable for filling the pores of molds (FMS) for molds made of fiberglass-reinforced polyester, epoxy, and other resins. It is used to fill the pores in both new molds and older molds with microporous areas and shallow surfaces.
Kč3,197.59
Foaming agent EE 2 /HAVEL/ for epoxy foaming resins LH...
  • -Kč293.84

Foaming agent EE 2 /HAVEL/ for epoxy foaming resins LH 100 and LH 128

111014
Foaming agent for foaming resins LH 100 and LH 128. Mixing ratio 1-5% by weight. Always mix thoroughly before combining with the hardener. The rule applies that less agent = greater bulk density and more, conversely, less bulk density and lower strength.
Kč3,134.31 Kč3,428.15
Time left
Foaming Agent EP 50 /MGS/
  • -Kč1,067.22

Foaming Agent EP 50 /MGS/

001034
In the foaming resins L 35, L 36, and L 40, it is mixed with the foaming resin in a ratio of 100:1 to 100:3 max. up to 100:5. The foaming agent must be mixed as thoroughly as possible - preferably mechanically!
Kč3,913.14 Kč4,980.36
Time left
Foaming SYSTEM 5 for hockey stick repair, component A

Foaming SYSTEM 5 for hockey stick repair, component A

111247
General: Component A is an epoxy resin modified with special black fillers, characterized by higher viscosity. It is suitable for foaming. Component B is a hardener, a mixture of technical polyalkylene polyamines, primarily containing diethylenetriamine, suitable for
Kč355.74
Foaming SYSTEM 5 for hockey stick repair, component B

Foaming SYSTEM 5 for hockey stick repair, component B

111248
Component B is a hardener mixture of technical polyalkylene polyamines, primarily containing diethylenetriamine, suitable for the foaming system. Generally: Component A is an epoxy resin modified with special black color fillers, characterized by higher viscosity. It is suitable
Kč383.91
Foaming SYSTEM 5 for hockey stick repair, component C

Foaming SYSTEM 5 for hockey stick repair, component C

111249
Component C is a foaming component. In general: Component A is an epoxy resin modified with special black color fillers, characterized by higher viscosity. It is suitable for foaming. Component B is a hardener, a mixture of technical polyalkylene polyamines, predominantly containing
Kč2,934.86
Formula Five - cleaner and polish 0.95 L

Formula Five - cleaner and polish 0.95 L

002046
Very effectively removes smudges and fingerprints from resin that occur during assembly, finishing work, or repairs. The product is available on order.
Kč608.32
Formula Five - release wax-1pc -340g

Formula Five - release wax-1pc -340g

eshop_002046
FORMULA FIVE- release wax for general use, which mixes carnauba wax - the most durable protection in nature - with modern polymers and hydrocarbon waxes. Silicone is added for easy application and facilitates multiple releases
Kč603.94
Frekote 700 NC - separator

Frekote 700 NC - separator

eshop_002030
Semi-permanent polymer separator for multiple use for separating all thermosets and most moldable polymers. Ensures high slip where problematic mold geometry complicates polymer processing. 700-NC cures at normal
Kč1,677.13
Frekote B 15 - base separator

Frekote B 15 - base separator

eshop_002029
The pore filler fills the micropores of molds and fills in fine scratches on their surface. When used together with other Frekote products, B-15 acts as an excellent base layer that enhances the provided separation capabilities. It is applied with a thin even layer.
Kč5,124.35
Frekote NC 770 - separator

Frekote NC 770 - separator

eshop_002055/2
Frekote separator 770-NC is a universal release agent with high slip suitable for cases where there are problems with mold geometry. It cures quickly at room temperature and creates a glossy surface on the castings. It is applied to a clean mold surface by spraying, sh
Kč1,740.81
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text