Home

HAVELcell P1 - Polyester Foam for Sandwich Production

HAVELcell P1 - Polyester Foam for Sandwich Production

eshop_111100
Reinforced white foam based on orthophthalic polyester resin. It has a viscosity similar to that of a sealant, is thixotropic, and does not run even at a layer thickness of 5 mm. The foam is suitable for creating sandwich structures directly in the mold. By using this foam, you can also significantly reduce
Kč349.19
HAVELcore soft, thickness 2mm, width 1000mm (1722)

HAVELcore soft, thickness 2mm, width 1000mm (1722)

eshop_800000
Havelcore is a sandwich material similar to Coremat XX, but it is more pliable and shapes better. Its price is very attractive. Material: Polyester fibers and expanded microbeads. Havelcore 2 mm has a surface weight of 40-50 g/m2 and its thickness varies
Kč184.48
HAVELcore soft, thickness 4mm, width 1000mm (1724)

HAVELcore soft, thickness 4mm, width 1000mm (1724)

eshop_800002
Havelcore is a sandwich material similar to Coremat XX, but it is more pliable and shapes better. Its price is very attractive. Material: Polyester fibers and expanded microbeads. Havelcore 4 mm has a surface weight of 85-100 g/m2 and its thickness varies
Kč294.65
HAVELcore soft, thickness 5mm, width 1000mm (1725)

HAVELcore soft, thickness 5mm, width 1000mm (1725)

eshop_800003
Havelcore is a sandwich material similar to Coremat XX, but it is more flexible and shapes better. Its price is very interesting. Material: Polyester fibers and expanded microbeads. Havelcore 4 mm has a surface weight of 85-100 g/m2 and its thickness varies
Kč289.89
HAVELex 1

HAVELex 1

eshop_002042/2
New special filler that increases viscosity similarly to Aerosil, but smoothly and similarly to microballoons reduces the bulk density of the resin. Due to the fact that the filler is made from a special plastic, it has significantly greater p when mixed with the resin.
Kč3,733.46
HAVELfiller E - elastic white polyester two-component...

HAVELfiller E - elastic white polyester two-component filler, 1kg

eshop_800013/a
Elastic extra white polyester two-component filler for filling common substrates including cast iron, aluminum, zinc, and fiberglass. HAVELfiller E is pore-free, elastic, suitable as both a filling and top filler, which sands well. For curing, use red
Kč564.70
Havelgelcoat 65 - polyester clear - brushable

Havelgelcoat 65 - polyester clear - brushable

eshop_000040/55
Havelgelcoat 65 is a pre-accelerated isophthalic gelcoat designed for application into molds. It is designed for brush application.\nIt is intended for use in the marine, construction, and transportation industries. It is also suitable for general use. It excels in durability
Kč541.72
Havelgelcoat 65 - polyester white - brushable

Havelgelcoat 65 - polyester white - brushable

eshop_000040/26
Havelgelcoat 65 is a pre-accelerated isophthalic gelcoat designed for application in molds. It is designed for brush application.\nIt is intended for use in the marine, construction, and transportation industries. It is also suitable for general use. It excels in durability
Kč511.85
Havelgelcoat 97 - polyester clear - brushable

Havelgelcoat 97 - polyester clear - brushable

eshop_000040/28
Havelgelcoat 97 is a pre-accelerated isophthalic gelcoat designed for application in molds. It has excellent adhesion to epoxy resins and pre-pregs. Suitable for brush application, Havelgelcoat 97 can be available in a wide range of colors. The processing technique is at one
Kč497.79
HAVELinhibit 1

HAVELinhibit 1

eshop_100022
Material suitable for extending gel-time. An excellent aid in the production of large or complex products made from polyester and vinylester resins, especially during the summer months. Recommended dosage 0.1 - 0.6% (by weight)
Kč857.60
HAVELPOL - 2 - white 2%

HAVELPOL - 2 - white 2%

eshop_111195
HAVELpol 2 - white RAL 9010 polyester resin. It is a pre-accelerated polyester resin developed for hand lamination or spraying. It is suitable for the production of products where coloring is required - bathtubs and other sanitary products. For curing
Kč360.17
HAVELPOL - 4

HAVELPOL - 4

eshop_000040/5
HAVELpol 4 is a clear yellowish unaccelerated polyester resin. To cure, it is necessary to mix in two additional components: Accelerator-cobalt and Catalyst-peroxide. The resin is suitable for manual lamination of transparent parts with high resistance and requirements
Kč354.31
HAVELPOL - 5 CLEAR non-accelerated!

HAVELPOL - 5 CLEAR non-accelerated!

eshop_000040/6
HAVELpol 5 polyester resin is suitable for the production of strength-demanding parts that must withstand greater loads. Note that the resin is not pre-accelerated - A CATALYST AND ACCELERATOR ARE REQUIRED FOR CURING! To cure, add the Peroxi catalyst
Kč316.25
HAVELPOL -1

HAVELPOL -1

eshop_000040/2
Basic orthophthalic resin, pre-accelerated, thixotropic and simultaneously low-emission. It is suitable for products that do not require high strength. For lamination, basic peroxides such as Butanox M 50 or peroxide K 1 are suitable. Basic mixing ratio 100:1-2 (note it is not a sou
Kč209.37
HAVELPOL -2 - new formulation

HAVELPOL -2 - new formulation

eshop_000040/3
Standard orthophthalic polyester resin HAVELpol 2. It is a pre-accelerated polyester resin developed for hand lamination or spraying. For curing, add peroxide K1 or Butanox M50 in a ratio of 100:1-3 by weight. Pot Life at 1% Butanox
Kč346.99
Heavenly Blue Pigment Paste RAL 5015

Heavenly Blue Pigment Paste RAL 5015

eshop_002004
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Can be colored up to 20% of the resin volume. A larger amount may significantly affect the parameters of the cured resin.
Kč2,258.01
Herex C71.75, tl. 9 mm, 2150 x 1000

Herex C71.75, tl. 9 mm, 2150 x 1000

eshop_009052/6
Cured polyvinyl chloride foam for the production of sandwich structures with higher thermal resistance. Sheet size: 2150x1000 mm. Suitable for laminating and bonding with polyester, vinylester, or epoxy. PVC foam coated with glass, aramid, carbon, or
Kč920.19
High-Temperature Epoxy Resin Araldit SW 18

High-Temperature Epoxy Resin Araldit SW 18

eshop_001052/2
Green polishable epoxy gelcoat for mold making for hand lamination, vacuum infusion, and RTM, also suitable for the production of polyester parts (gelcoat resistant to styrene). For curing, use hardener Araldit HY 5159 in a weight ratio of 100:16.
Kč1,603.19
Holder 5-7mm, d. 19cm

Holder 5-7mm, d. 19cm

eshop_483010
Solvent resistant. Suitable for shorter rollers with an internal diameter of 6 mm. Length 20 cm.
Kč25.48
holder 6mm, d. 39cm/6mm

holder 6mm, d. 39cm/6mm

eshop_161010
Solvent resistant. Suitable for shorter rollers with an inner diameter of 6 mm. Length 42 cm.
Kč40.34
IMPASOL - ORANGE (residue-free)

IMPASOL - ORANGE (residue-free)

eshop_900160
Fast degreasing and cleaning liquid for industry and engineering IMPASOL® ORANGE is a combination of two excellent degreasing liquids into one absolutely unique FAST SAFE DEGREASER. Its advantage lies in the microemulsion content of natural terpenes (with
Kč592.96
Ipitherm G - 0 - 35 R - component A

Ipitherm G - 0 - 35 R - component A

eshop_000041/1
Two-component polyurethane system IPITHERM designated G-0-35R is a polyurethane-based foaming system suitable for foaming and filling hollow spaces. The mixing ratio is 100:135 (by weight). Use IPITHERM G-0-35R /component B/ as the hardener.
Kč446.92
Ipitherm G - 0 - 35 R - component B

Ipitherm G - 0 - 35 R - component B

eshop_000041/2
Two-component polyurethane system IPITHERM designated G-0-35R is a polyurethane-based foaming system suitable for foaming and filling hollow spaces. Mixing ratio 100:135 (by weight)\n\n \n\n \n\nIn 2020, the REAC regulation
Kč446.92
ISPOFLEX 50 gray 310 ml - replacement for Emfimastic

ISPOFLEX 50 gray 310 ml - replacement for Emfimastic

eshop_900510
ISPOFLEX 50 is a single-component polyurethane elastomer sealant, curing by the action of moisture present in the air or in substrates to form a flexible and durable bond with high adhesion to various materials. AREAS OF USE ISPOFLEX 50 can be used for sealing
Kč199.85
Labels for Laminating A4 (mat)

Labels for Laminating A4 (mat)

eshop_010218
Thinner mat for label production. Can be easily printed and impregnated in the first or last layer of the product. The fibers become translucent after impregnation and the print itself appears, which is perfectly protected by resin.\nDesigned primarily for laser printers.
Kč36.24
Large Cutting Wheel 60 mm complete - OLFA - RTY - 3/G

Large Cutting Wheel 60 mm complete - OLFA - RTY - 3/G

eshop_010030
A great and time-tested tool for cutting fiberglass and carbon fabrics. Cuts up to 20 layers of fabric at once. The longest blade durability and cutting efficiency are achieved on a Linoleum mat.
Kč614.92
LH 260 with Defoamer

LH 260 with Defoamer

eshop_112218/1
General: Epoxy resin LH 260 with defoamer contains added substances based on a silicone-free defoamer suitable for all applications. The defoamer allows for faster removal of microbubbles from the future composite. Epoxy resin LH 260 is
Kč531.47
Light Blue Pigment Paste RAL 5012

Light Blue Pigment Paste RAL 5012

eshop_002007
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. The pigment paste is made by grinding the pigment with resin between rollers. Because the pigment is very well mixed, only a small amount is needed to color the resin
Kč2,242.27
Lightweight Microballoons

Lightweight Microballoons

eshop_002044
Suitable for thickening all resins. Used wherever it is necessary to apply resin in larger quantities so that it does not run. Microballoons are miniature glass hollow spheres that increase the volume of resins without significantly affecting their h
Kč541.72
Liquid Silicone HT 33 - transparent LT

Liquid Silicone HT 33 - transparent LT

eshop_710125
Liquid silicone resin for casting molds and products. It is a firmer form of silicone that, despite this, is very flexible and tear-resistant. Suitable for larger molds or for less shape-demanding molds and products. This type is also popular and sought after.
Kč1,827.20
Liquid Silicone HT 45 - transparent

Liquid Silicone HT 45 - transparent

eshop_710146
Liquid transparent silicone resin suitable for casting molds and products. Processing time 10 min. Demolding time 1 hour 20 minutes. Viscosity: 8,000 cPs. This type is very popular and achieves a Shore A hardness of 45 after curing.
Kč1,581.23
Liquid Silicone ZA 13 - transparent

Liquid Silicone ZA 13 - transparent

eshop_710123
Liquid silicone resin for casting molds and products. It is a very soft type of silicone that, despite this, is very flexible and tear-resistant. Suitable for smaller molds or for geometrically demanding molds and products. This type is also obl
Kč1,803.77
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text