Home

Clamp Valve for Infusions

Clamp Valve for Infusions

eshop_900920
Screw valve for tightening input and output hoses, especially in vacuum infusion techniques for composite manufacturing. The valve is made of metal components and excels in durability and reusability. With proper handling, there is no contamination.
Kč1,225.45
Compressed Sponge

Compressed Sponge

eshop_010324
An excellent helper for underwater sanding. Very absorbent sponge gentle on surfaces. Delivered in a compressed state and expands after soaking in water.
Kč104.68
Cyan Blue Pigment Paste RAL 5010

Cyan Blue Pigment Paste RAL 5010

eshop_002005
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Can be colored up to 20% of the resin volume. A larger amount may significantly affect the parameters of the cured resin.
Kč2,679.30
Dark Green RAL 6002 Pigment Paste

Dark Green RAL 6002 Pigment Paste

eshop_002075/2
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Recommended dosage up to 20%. Larger amounts may significantly affect the mechanical properties of the gelcoat or resin.
Kč2,986.76
Device for distilling contaminated acetone and other...

Device for distilling contaminated acetone and other solvents 20L

eshop_900606
Small and handy device for distilling contaminated solvents with a capacity of 20L, consumption 1.2Kw/h, stainless steel design ATEX. Maintenance-free device with a payback period of 5-7 months. Devices for 50, 150, and 500 liters are also available. Delivery on order 10-14 days. Goods
Kč319,788.72
Distribution mesh OM 70 - 180g/m2 w.650mm - green

Distribution mesh OM 70 - 180g/m2 w.650mm - green

eshop_900282
Distribution mesh with high porosity allowing good airflow and resin flow, OM70 is recommended for vacuum or infusion technologies with polyester or epoxy.\n\nAvailable in INFUPLEX version (combined with perforated film) for easier
Kč113.32
Filament 160 - polypropylene tape 20 mm, 160°C (roll 1000m)

Filament 160 - polypropylene tape 20 mm, 160°C (roll 1000m)

eshop_900331
Thin polypropylene tape designed not only for the production of tubes and other profiles (binding materials to the mandrel), but also for repairs. Even though the tape is very thin, it can exert a great pressure on the product and thus squeeze out excess resin. We supply it in width
Kč889.44
Filler Clay - Putty (EXTRA SOFT)

Filler Clay - Putty (EXTRA SOFT)

eshop_010256/9
Filler clay - putty is a material suitable for minor repairs and adjustments of molds and models. With this material, you can easily and quickly repair chipped edges of molds or perfectly fill gaps in the separating planes of multi-part molds. This material is thermally in
Kč244.80
Filling Clay - Putty

Filling Clay - Putty

eshop_010256
Filling clay - putty is a material suitable for minor repairs and adjustments of molds and models. With this material, you can easily and quickly repair chipped edges of molds or very perfectly seal gaps in the separating planes of multi-part molds. This material is thermally in
Kč801.59
Filter holder for 3M 501, 7500 chemical mask

Filter holder for 3M 501, 7500 chemical mask

eshop_010096
Plastic holders 501 for half mask 7500 are a necessary accessory for securing dust filters P2 to the basic carbon filters 6055A2 used with the chemical half mask.
Kč205.22
Filters for 3M 6055A2 chemical mask - chemical

Filters for 3M 6055A2 chemical mask - chemical

eshop_010094
Chemical filters A2 are very effective and reliably filter organic vapors, protecting you from inhalation. Think about your health before it's too late! For maximum filter lifespan, we recommend using dust pre-filters, which protect you and chemicals
Kč689.01
FLO-KING Plastic Drum Tap - Large

FLO-KING Plastic Drum Tap - Large

eshop_010165/1
The polyethylene drain tap is suitable for draining larger quantities of materials from metal drums with a corresponding opening. In our offer, you will also find a smaller drain tap that is suitable for draining smaller quantities of material.
Kč1,125.16
FLO-RITE Plastic Drum Tap - Small

FLO-RITE Plastic Drum Tap - Small

eshop_010165/2
The polyethylene drain tap (small) is suitable for draining smaller quantities of materials from metal drums with the appropriate opening. In our offer, you will also find a larger drain tap that is suitable for draining larger quantities of material.
Kč137.99
Graphite Black Pigment Paste RAL 9011

Graphite Black Pigment Paste RAL 9011

eshop_002010/1
The pigment paste is made by grinding pigment with resin between rollers. Because the pigment is very well mixed, often only a very small amount of pigment paste is needed to color the resin or gelcoat. To color thin layers of gelcoats, it is necessary
Kč1,441.04
View
Gravel Grey RAL 7032 Pigment Paste

Gravel Grey RAL 7032 Pigment Paste

eshop_002011/1
The pigment paste is made by grinding pigment with resin between rollers. Because the pigment is very well mixed, often only a very small amount of pigment paste is needed to color the resin or gelcoat. To color thin layers of gelcoats, it is necessary
Kč1,603.19
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text