Home

Showing 25-48 of 167 item(s)

Coating Roller RotaVelur 10cm/17mm

eshop_500231

Roller made of natural material - wool, thermal fusion

Kč36.31

Compressed Sponge

eshop_010324

An excellent helper for underwater sanding. Very absorbent sponge gentle on surfaces. Delivered in a compressed state and expands after soaking in water.

Kč104.68

Device for distilling contaminated acetone and other solvents 20L

eshop_900606

Small and handy device for distilling contaminated solvents with a capacity of 20L, consumption 1.2Kw/h, stainless steel design ATEX. Maintenance-free device with a payback period of 5-7 months. Devices for 50, 150, and 500 liters are also available. Delivery on order 10-14 days. Goods

Kč319,788.72

Distribution mesh OM 70 - 180g/m2 w.650mm - green

eshop_900282

Distribution mesh with high porosity allowing good airflow and resin flow, OM70 is recommended for vacuum or infusion technologies with polyester or epoxy.\n\nAvailable in INFUPLEX version (combined with perforated film) for easier

Kč113.32

Emfimastik PU 50 - adhesive - black (for flexible bonding of laminates) 300 ml

eshop_010062

Single-component flexible adhesive for bonding laminate parts and their joints. It flexibly bonds laminate, metal, some plastics, wood, and many other materials. A material that we use very often in our laminating shop and we have tested it. It is supplied in a cartridge.

Kč210.83

Filament 160 - polypropylene tape 20 mm, 160°C (roll 1000m)

eshop_900331

Thin polypropylene tape designed not only for the production of tubes and other profiles (binding materials to the mandrel), but also for repairs. Even though the tape is very thin, it can exert a great pressure on the product and thus squeeze out excess resin. We supply it in width

Kč889.44

Filler Clay - Putty (EXTRA SOFT)

eshop_010256/9

Filler clay - putty is a material suitable for minor repairs and adjustments of molds and models. With this material, you can easily and quickly repair chipped edges of molds or perfectly fill gaps in the separating planes of multi-part molds. This material is thermally in

Kč244.80

Filling Clay - Putty

eshop_010256

Filling clay - putty is a material suitable for minor repairs and adjustments of molds and models. With this material, you can easily and quickly repair chipped edges of molds or very perfectly seal gaps in the separating planes of multi-part molds. This material is thermally in

Kč801.59

Filter holder for 3M 501, 7500 chemical mask

eshop_010096

Plastic holders 501 for half mask 7500 are a necessary accessory for securing dust filters P2 to the basic carbon filters 6055A2 used with the chemical half mask.

Kč205.22

Filters for 3M 6055A2 chemical mask - chemical

eshop_010094

Chemical filters A2 are very effective and reliably filter organic vapors, protecting you from inhalation. Think about your health before it's too late! For maximum filter lifespan, we recommend using dust pre-filters, which protect you and chemicals

Kč689.01

FIN - metal roller - 12 x 75 mm

eshop_503336

Kč181.18

FIN - metal roller 12 x 100 mm

eshop_503337

Kč197.65

FIN - metal roller 21 x 100 mm

eshop_503340

Kč207.54

FIN - metal roller 21 x 75 mm

eshop_503339

Kč191.07

FIN - metal roller 25 x 100 mm

eshop_503343

Roller with cross grooving that prevents resin from splashing out of the mold.

Kč209.37

View

FLO-KING Plastic Drum Tap - Large

eshop_010165/1

The polyethylene drain tap is suitable for draining larger quantities of materials from metal drums with a corresponding opening. In our offer, you will also find a smaller drain tap that is suitable for draining smaller quantities of material.

Kč1,125.16

FLO-RITE Plastic Drum Tap - Small

eshop_010165/2

The polyethylene drain tap (small) is suitable for draining smaller quantities of materials from metal drums with the appropriate opening. In our offer, you will also find a larger drain tap that is suitable for draining larger quantities of material.

Kč137.99

Fuzzy rollers for applying resin - large (10 cm with long fibers)

eshop_010053/a

Kč14.64

Glass DIRECT roving 1200 tex

eshop_510002

Glass roving type E made from combined yarn without protective twist, suitable especially for weaving and winding. Modified especially for epoxy and polyester resins. A strand of individual glass fibers for local unidirectional reinforcement. 1200 tex (tex

Kč162.52

Glass DIRECT roving 2400 tex

eshop_510000

Strand of individual glass fibers WITHOUT PROTECTIVE TWIST. It is used for various applications, primarily for machine processing. In manual processing, it is used for longitudinal reinforcement of manufactured parts. The designation-number, the number of tex indicates how many grams

Kč135.06

Glass Roving ASSEMBLED 2400 tex

eshop_510001

Strand of individual glass fibers. It is used for various applications, primarily for machine processing. In manual processing, it is used for longitudinal reinforcement of manufactured parts. The designation-number, the number of tex indicates how many grams weigh 1000 mb of roving.

Kč165.08

Glass roving for edges - larger volume ECO 14 T5000 tex

eshop_003013

An indispensable helper for reinforcing the edges of molds and products. It significantly increases the strength of the edges, effectively removes air bubbles, and prevents chipping and sagging of the gelcoat at the edges. 5 kg=1000 meters (5000 tex) 0.5 kg=100 meters 0.1 kg=20 meters 1 linear meter

Kč321.15