Home

Showing 25-48 of 174 item(s)

Device for distilling contaminated acetone and other solvents 20L

eshop_900606

Small and handy device for distilling contaminated solvents with a capacity of 20L, consumption 1.2Kw/h, stainless steel design ATEX. Maintenance-free device with a payback period of 5-7 months. Devices for 50, 150, and 500 liters are also available. Delivery on order 10-14 days. Goods

Kč319,788.72

Distribution mesh OM 70 - 180g/m2 w.650mm - green

eshop_900282

Distribution mesh with high porosity allowing good airflow and resin flow, OM70 is recommended for vacuum or infusion technologies with polyester or epoxy.\n\nAvailable in INFUPLEX version (combined with perforated film) for easier

Kč113.32

Emfimastik PU 50 - adhesive - black (for flexible bonding of laminates) 300 ml

eshop_010062

Single-component flexible adhesive for bonding laminate parts and their joints. It flexibly bonds laminate, metal, some plastics, wood, and many other materials. A material that we use very often in our laminating shop and we have tested it. It is supplied in a cartridge.

Kč210.83

Filament 160 - polypropylene tape 20 mm, 160°C (roll 1000m)

eshop_900331

Thin polypropylene tape designed not only for the production of tubes and other profiles (binding materials to the mandrel), but also for repairs. Even though the tape is very thin, it can exert a great pressure on the product and thus squeeze out excess resin. We supply it in width

Kč889.44

Filler Clay - Putty (EXTRA SOFT)

eshop_010256/9

Filler clay - putty is a material suitable for minor repairs and adjustments of molds and models. With this material, you can easily and quickly repair chipped edges of molds or perfectly fill gaps in the separating planes of multi-part molds. This material is thermally in

Kč244.80

Filling Clay - Putty

eshop_010256

Filling clay - putty is a material suitable for minor repairs and adjustments of molds and models. With this material, you can easily and quickly repair chipped edges of molds or very perfectly seal gaps in the separating planes of multi-part molds. This material is thermally in

Kč801.59

Filter holder for 3M 501, 7500 chemical mask

eshop_010096

Plastic holders 501 for half mask 7500 are a necessary accessory for securing dust filters P2 to the basic carbon filters 6055A2 used with the chemical half mask.

Kč205.22

Filters for 3M 6055A2 chemical mask - chemical

eshop_010094

Chemical filters A2 are very effective and reliably filter organic vapors, protecting you from inhalation. Think about your health before it's too late! For maximum filter lifespan, we recommend using dust pre-filters, which protect you and chemicals

Kč689.01

FIN - metal roller - 12 x 75 mm

eshop_503336

Kč181.18

FIN - metal roller 12 x 100 mm

eshop_503337

Kč197.65

FIN - metal roller 21 x 100 mm

eshop_503340

Kč207.54

FIN - metal roller 21 x 75 mm

eshop_503339

Kč191.07

FIN - metal roller 25 x 100 mm

eshop_503343

Roller with cross grooving that prevents resin from splashing out of the mold.

Kč209.37

View

FLO-KING Plastic Drum Tap - Large

eshop_010165/1

The polyethylene drain tap is suitable for draining larger quantities of materials from metal drums with a corresponding opening. In our offer, you will also find a smaller drain tap that is suitable for draining smaller quantities of material.

Kč1,125.16

FLO-RITE Plastic Drum Tap - Small

eshop_010165/2

The polyethylene drain tap (small) is suitable for draining smaller quantities of materials from metal drums with the appropriate opening. In our offer, you will also find a larger drain tap that is suitable for draining larger quantities of material.

Kč137.99

Fuzzy rollers for applying resin - large (10 cm with long fibers)

eshop_010053/a

Kč14.64

HAVEL filler E1, component A

eshop_111107/1

Two-component filler for basic filling of epoxy laminates, wood, and most metals. The advantage of this filler is its ability to auto-penetrate the filled material. In practice, this means that if the substrate requires it, part of the epoxy resin will be released immediately after application.

Kč516.10

HAVEL filler E1, component B

eshop_111108/1

Hardener recommended for curing the epoxy putty HAVELfiller E1/A Mixing ratio 100:35 (by weight) working time is 20-30 minutes. A hardener with a longer or shorter working time can be supplied on request.

Kč670.92

HAVEL filler G - bal. 1kg

eshop_800007

Polyester two-component filler with a high content of glass fiber is suitable for filling various materials such as automotive bodies, cast iron castings, laminate, wood, and many other materials. HAVELfiller G easily replaces missing parts of the material

Kč746.69

HAVEL filler P - bal 2 kg

eshop_800021

Polyester two-component filler with an extended processing time is suitable for filling large parts and large surfaces. HAVELfiller P has excellent adhesion to various surfaces including galvanized steel, is thinner and shapes well. The filler is easy to apply and works excellently

Kč1,427.50

HAVEL filler SFP - bal. 1,8kg

eshop_800011

Polyester two-component filler recommended especially where extremely good sandability is required. HAVELfiller SFP is suitable for most common substrates including cast iron, aluminum, and laminates. The filler is medium dense, pore-free, and shapes very well. P

Kč995.59

HAVEL filler SP - fine finishing two-component filler - pack. 2 kg

eshop_800018

Polyester two-component fine filler for finishing small imperfections, grooves, and pores on automotive bodies or other metal parts, cast iron castings, and machine surfaces. HAVELfiller SP has excellent adhesion, is very thick, and shapes well.

Kč1,480.94

HAVEL filler U - bal. 1kg

eshop_800005

Universal polyester two-component filler suitable for filling common substrates including cast iron, aluminum, and fiberglass. HAVELfiller U is a thick, very well moldable filler that sands well, is pore-free, and is suitable as a universal filling compound. For

Kč587.40

HAVELfiller E - elastic white polyester two-component filler, 1kg

eshop_800013/a

Elastic extra white polyester two-component filler for filling common substrates including cast iron, aluminum, zinc, and fiberglass. HAVELfiller E is pore-free, elastic, suitable as both a filling and top filler, which sands well. For curing, use red

Kč564.70

Product added to wishlist

Product added to compare.

iqitcookielaw - module, put here your own cookie law text