Home

Showing 13-24 of 115 item(s)

Epoxidová pryskyřice L 285 (MGS)

eshop_001007

Very high-quality resin for the aerospace industry and for model making. The resin with hardener creates a very viscous mixture, allowing the fibers to be quickly and thoroughly impregnated. As a result, the product has significantly lower weight and higher utility value. More details

Kč945.81

Epoxy gelcoat 7060 clear

eshop_900882

UV stabilized transparent epoxy gelcoat for the visible layer of carbon parts, more information in TL and BL:

Kč1,541.70

Epoxy Gelcoat for Mold Production Araldit SW 404

eshop_001052

Top-quality gelcoat for mold production. Blue in color, it is known for its unmatched durability and time-tested quality. The only disadvantage is that it cannot be polished. Chemically resistant. For curing, use hardener Araldit HY 2404 in a ratio of 100:10. Curing time

Kč1,188.85

Epoxy Gelcoat P for Mold Production, Black

eshop_001061

Creates a solid surface and edges of molds, is polishable and has a black color. After mixing, we recommend vacuuming in a prepared bell to remove microbubbles formed during mixing. Recommended hardeners EPH 161 (VE 3261) and EPH 573 (VE 2723). The coverage is 0.5-1 kg/m2

Kč1,256.20

Epoxy gelcoat white spray EG 100-W - for thin layers

eshop_001044

A solution of medium molecular weight epoxy resin in a mixture of organic solvents with the addition of additives, white shade RAL 9003. This epoxy gelcoat can be applied solely by spraying. It can also be applied as a brush coating. The secret of smooth p

Kč1,054.15

Epoxy Resin 324 ( 371 1200 )

eshop_001037/1

Relatively inexpensive and proven resin CHS EPOXY 1200 for various applications. Characterized by high density, it is most commonly used for bonding, has good adhesion to most materials. Very tough resin. It is mixed with hardener P 11 in a ratio of 100:7 processing time

Kč398.60

Epoxy Resin 455 (formerly 512, 1505)

eshop_001038

Relatively inexpensive epoxy resin suitable for the production of molds or parts where the minimum wall thickness is 1mm or more. After curing, it usually has a milky color. It is mixed with hardener P 11 in a ratio of 100:10 with a working time of 100g/20°C 15-20 min. Or with hardeners

Kč514.63

Epoxy Resin C

eshop_001029

Chemically resistant epoxy resin. Used in the construction of tanks, cisterns, and pipelines. Due to its parameters, it is suitable and often used in the production of fiberglass fuel tanks. The resin is quite thick, so it is advisable to preheat it before impregnating the fibers.

Kč622.97

Epoxy Resin L

eshop_001025

Epoxy resin suitable for impregnating glass, aramid, and carbon fibers and fabrics. With recommended hardeners, it creates a laminating system that has good adhesion to wood, steel materials, polystyrene, and other similar materials. Recommended t

Kč840.39

Epoxy Resin L 20

eshop_001027

Resin L 20 is a laminating resin suitable for most processes for laminating primarily in the aerospace industry. Epoxy resin for saturating glass, aramid, and carbon fibers. It bonds wood, metals, styrofoam, etc. It is suitable for manual lamination.

Kč1,048.73

Epoxy Resin LH 1000

eshop_111068

Denser epoxy resin suitable for bonding, casting, pouring, and when heated to 35°C and above also suitable for laminating and injection into warm molds, production of polymer concrete and adhesives. Hardener 133-138 (MGS) can be used in the mixing ratio of resin:hardener

Kč447.28

Epoxy Resin LH 130

eshop_111039

Standard resin of medium viscosity based on bisphenol A with reduced crystallization ability. For curing at room temperature from 10-30°C. Used for boat building, sports equipment, model aircraft, molds, tools, adhesives, and castings. Viscosity

Kč522.68

Product added to wishlist

Product added to compare.

iqitcookielaw - module, put here your own cookie law text