Home

Showing 25-48 of 121 item(s)

Epoxy Resin LH 1000

eshop_111068

Denser epoxy resin suitable for bonding, casting, pouring, and when heated to 35°C and above also suitable for laminating and injection into warm molds, production of polymer concrete and adhesives. Hardener 133-138 (MGS) can be used in the mixing ratio of resin:hardener

Kč447.28

Epoxy Resin LH 130

eshop_111039

Standard resin of medium viscosity based on bisphenol A with reduced crystallization ability. For curing at room temperature from 10-30°C. Used for boat building, sports equipment, model aircraft, molds, tools, adhesives, and castings. Viscosity

Kč522.68

Epoxy Resin LH 145

eshop_111026

Epoxy resin suitable for the production of sports equipment, boats, and automotive parts. It is particularly suitable for manufacturing using glass, carbon, and aramid fibers. Hardener 133-138 (MGS) can be used in a mixing ratio of resin:hardener 100:35 by weight or harden

Kč450.21

Epoxy Resin LH 160 /HAVEL/

eshop_111020

This is a laminating resin with medium viscosity that does not contain solvents or fillers, intended for processing and curing at room temperature. Suitable for the production of parts reinforced with glass, carbon, and aramid fibers, its features are

Kč505.11

Epoxy Resin LH 206C

eshop_111225

Epoxy resin LH 206C is characterized by low viscosity. It is suitable for casting. It is a modified resin. It can be used as a base for preparing fillers. In combination with hardener T 600 and hardener H 206C, castings 10 to 15 mm thick can be obtained

Kč714.48

Epoxy Resin LH 210

eshop_111071

The epoxy system LH 210/H 10 has been developed based on your requirements for a clear and UV stable product. The system exhibits extreme clarity and minimal shrinkage. Additionally, it is very environmentally friendly and safe for your health, as it does not

Kč472.17

Epoxy Resin LH 230

eshop_111215

Epoxy resin LH 230 is characterized by low viscosity. When cured with amines or polyamines, it offers high-quality application properties such as high mechanical properties, good chemical resistance, good thermal properties, etc. Laminating system p

Kč510.60

Epoxy Resin LH 260

eshop_111001

Epoxy resin LH 260 for increased temperature resistance. For curing, it is advisable to use hardeners 285, 286, 287 all in a ratio of 100:40 (by weight). Also newly an excellent hardener H 146 100:30/(by weight). The product after initial curing is still gradually thermally d

Kč658.85

Epoxy Resin LH 260 with UV Stabilizer - Black

eshop_112217

Low-viscosity resin based on epoxy resin. The micro-particles contained in the epoxy resin give the resulting composite a black color and improve its strength under static and dynamic loading (modulus of elasticity, tensile strength, and flexural strength)

Kč515.36

Epoxy Resin LH 287

eshop_112219

Epoxy resin LH 287 is characterized by extremely low viscosity, comparable\nto resin 285. When cured with amines or polyamines, it offers high-quality application\nproperties such as high mechanical properties and good chemical resistance

Kč571.00

Epoxy Resin LH 288

eshop_111211

Epoxy resin LH 288 is characterized by extremely low viscosity. When curing with amines or polyamines, it offers high-quality application properties such as high mechanical properties, good chemical resistance, excellent thermal properties, etc. It is

Kč533.30

Epoxy Resin LH 289

eshop_112220

Epoxy resin LH 289 is characterized by extremely low viscosity. During curing, it offers high-quality application properties such as optimal mechanical properties, good chemical resistance, excellent thermal properties, etc. It is suitable for the production of comp

Kč505.11

Epoxy Resin LH 300

eshop_111027

Very high-quality, medium-viscosity low-molecular resin for laminating parts with high resistance (up to 160°C). Must be cured at 90°C for a minimum of 3 hours. It is mixed with hardener H 300 (10:25) for temperature resistance up to 120°C or with hardener H 512 (

Kč727.66

Epoxy Resin LH 301

eshop_112216

Epoxy resin LH 301 is a resin that allows achieving temperature resistance of around 160°C with the appropriately selected hardener H 513. When curing with amines or polyamines, it offers high-quality application properties such as high mechanical properties, good ch

Kč625.17

Epoxy Resin LH 330

eshop_111057

Flexible epoxy resin suitable for curing at room temperature. The appropriate hardener is H 330, mixing ratio 100:40 by weight or 100:50 by volume. Gel time at 25 degrees Celsius is 70 min. Thermal resistance 50 degrees Celsius. Viscosity of the mixture at 25 degrees

Kč481.69

Epoxy Resin LH 385

eshop_111242

Epoxy resin LH 385 is characterized by low viscosity. The cured product is slightly flexible.\n\nWhen cured with amines or polyamines, it offers high-quality application properties such as high mechanical properties,\ngood chemical resistance,

Kč505.11

Epoxy Resin LR 285+ (Havel)

eshop_000000/xxx

Kč483.15

Epoxy Resin RIVERTABLE WWA

eshop_000034

Pouring epoxy resin designed primarily for creating casts with a thickness of 0-9cm. For example, pouring wooden table slabs into so-called Rivertables, etc.\n\nExcellent UV stability, clarity, colorless with the possibility of tinting using dyes and pigments, curing

Kč590.03

Epoxy Resin Surface Araldite SW 419-1

eshop_001074

Areas of use . tools for sheet forming . general mold production Processing methods Application using a brush or spatula Characteristic features . well spreadable . does not run . minimal sedimentation For curing, it is necessary to mix Hardener HV 2419 in

Kč951.67

Glass DIRECT roving 1200 tex

eshop_510002

Glass roving type E made from combined yarn without protective twist, suitable especially for weaving and winding. Modified especially for epoxy and polyester resins. A strand of individual glass fibers for local unidirectional reinforcement. 1200 tex (tex

Kč162.52

Glass DIRECT roving 2400 tex

eshop_510000

Strand of individual glass fibers WITHOUT PROTECTIVE TWIST. It is used for various applications, primarily for machine processing. In manual processing, it is used for longitudinal reinforcement of manufactured parts. The designation-number, the number of tex indicates how many grams

Kč135.06

Glass Roving ASSEMBLED 2400 tex

eshop_510001

Strand of individual glass fibers. It is used for various applications, primarily for machine processing. In manual processing, it is used for longitudinal reinforcement of manufactured parts. The designation-number, the number of tex indicates how many grams weigh 1000 mb of roving.

Kč165.08

Glass roving for edges - larger volume ECO 14 T5000 tex

eshop_003013

An indispensable helper for reinforcing the edges of molds and products. It significantly increases the strength of the edges, effectively removes air bubbles, and prevents chipping and sagging of the gelcoat at the edges. 5 kg=1000 meters (5000 tex) 0.5 kg=100 meters 0.1 kg=20 meters 1 linear meter

Kč321.15

Hardener 133 (MGS)

eshop_001017

Hardener for curing epoxy resin L 135, L 160, L, LR, LR 10O, LH 1000, LH 130, LH 160, LH 175, LH 145 Mixing ratio is 100:35/by weight/ or 100:40/by volume/. Pot life for 100g/20 C is 10-15 min. Minimum order quantity is 25kg!

Kč933.36

Product added to wishlist

Product added to compare.

iqitcookielaw - module, put here your own cookie law text