Home

Showing 25-48 of 210 item(s)

Dark Green RAL 6002 Pigment Paste

eshop_002075/2

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Recommended dosage up to 20%. Larger amounts may significantly affect the mechanical properties of the gelcoat or resin.

Kč2,986.76

Device for distilling contaminated acetone and other solvents 20L

eshop_900606

Small and handy device for distilling contaminated solvents with a capacity of 20L, consumption 1.2Kw/h, stainless steel design ATEX. Maintenance-free device with a payback period of 5-7 months. Devices for 50, 150, and 500 liters are also available. Delivery on order 10-14 days. Goods

Kč319,788.72

Distribution mesh OM 70 - 180g/m2 w.650mm - green

eshop_900282

Distribution mesh with high porosity allowing good airflow and resin flow, OM70 is recommended for vacuum or infusion technologies with polyester or epoxy.\n\nAvailable in INFUPLEX version (combined with perforated film) for easier

Kč113.32

Dove Blue Pigment Paste RAL 5014

eshop_002099/E

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats.

Kč1,429.69

Emfimastik PU 50 - adhesive - black (for flexible bonding of laminates) 300 ml

eshop_010062

Single-component flexible adhesive for bonding laminate parts and their joints. It flexibly bonds laminate, metal, some plastics, wood, and many other materials. A material that we use very often in our laminating shop and we have tested it. It is supplied in a cartridge.

Kč210.83

Filament 160 - polypropylene tape 20 mm, 160°C (roll 1000m)

eshop_900331

Thin polypropylene tape designed not only for the production of tubes and other profiles (binding materials to the mandrel), but also for repairs. Even though the tape is very thin, it can exert a great pressure on the product and thus squeeze out excess resin. We supply it in width

Kč889.44

Filler Clay - Putty (EXTRA SOFT)

eshop_010256/9

Filler clay - putty is a material suitable for minor repairs and adjustments of molds and models. With this material, you can easily and quickly repair chipped edges of molds or perfectly fill gaps in the separating planes of multi-part molds. This material is thermally in

Kč244.80

Filling Clay - Putty

eshop_010256

Filling clay - putty is a material suitable for minor repairs and adjustments of molds and models. With this material, you can easily and quickly repair chipped edges of molds or very perfectly seal gaps in the separating planes of multi-part molds. This material is thermally in

Kč801.59

Filter holder for 3M 501, 7500 chemical mask

eshop_010096

Plastic holders 501 for half mask 7500 are a necessary accessory for securing dust filters P2 to the basic carbon filters 6055A2 used with the chemical half mask.

Kč205.22

Filters for 3M 6055A2 chemical mask - chemical

eshop_010094

Chemical filters A2 are very effective and reliably filter organic vapors, protecting you from inhalation. Think about your health before it's too late! For maximum filter lifespan, we recommend using dust pre-filters, which protect you and chemicals

Kč689.01

FIN - metal roller - 12 x 75 mm

eshop_503336

Kč181.18

FIN - metal roller 12 x 100 mm

eshop_503337

Kč197.65

FIN - metal roller 21 x 100 mm

eshop_503340

Kč207.54

FIN - metal roller 21 x 75 mm

eshop_503339

Kč191.07

FIN - metal roller 25 x 100 mm

eshop_503343

Roller with cross grooving that prevents resin from splashing out of the mold.

Kč209.37

View

FLO-KING Plastic Drum Tap - Large

eshop_010165/1

The polyethylene drain tap is suitable for draining larger quantities of materials from metal drums with a corresponding opening. In our offer, you will also find a smaller drain tap that is suitable for draining smaller quantities of material.

Kč1,125.16

FLO-RITE Plastic Drum Tap - Small

eshop_010165/2

The polyethylene drain tap (small) is suitable for draining smaller quantities of materials from metal drums with the appropriate opening. In our offer, you will also find a larger drain tap that is suitable for draining larger quantities of material.

Kč137.99

Fuzzy rollers for applying resin - large (10 cm with long fibers)

eshop_010053/a

Kč14.64

Graphite Black Pigment Paste RAL 9011

eshop_002010/1

The pigment paste is made by grinding pigment with resin between rollers. Because the pigment is very well mixed, often only a very small amount of pigment paste is needed to color the resin or gelcoat. To color thin layers of gelcoats, it is necessary

Kč1,441.04

View

Gravel Grey RAL 7032 Pigment Paste

eshop_002011/1

Kč1,603.19

Green Pigment Paste RAL 6001

eshop_002017

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Can be colored up to 20% of the resin volume. A larger amount may significantly affect the parameters of the cured resin.

Kč2,904.77