Home

Liquid Silicone ZA 13 - transparent

Liquid Silicone ZA 13 - transparent

eshop_710123
Liquid silicone resin for casting molds and products. It is a very soft type of silicone that, despite this, is very flexible and tear-resistant. Suitable for smaller molds or for geometrically demanding molds and products. This type is also obl
Kč1,803.77
Liquid Silicone ZA 22 - BLUE

Liquid Silicone ZA 22 - BLUE

eshop_710124
Liquid blue silicone resin suitable for casting molds and products. Processing time 15 min. Demolding time 1 hour. Viscosity: 5,000 cPs. This type is very popular and achieves a Shore hardness of 22 after curing. Mixing ratio 1:1 (by weight) K
Kč1,739.35
Microcellulose powder - white

Microcellulose powder - white

eshop_002041
Suitable for thickening all resins. It is used wherever it is necessary to apply resin in larger quantities so that it does not run. It thickens by adding a smaller amount of filler. Due to its low price, it is among the popular fillers. It can also be successfully mixed
Kč218.88
PVA Brush Width 45 mm

PVA Brush Width 45 mm

eshop_002025
Working part made of foam moltopren. Suitable for manual applications. Replacement working moltopren part can be ordered.
Kč155.78
PVA Separator - Coating R+G

PVA Separator - Coating R+G

eshop_002024
Separator for epoxy, vinylester, and polyester resins up to max. 100°C. To create a primary layer, use a release wax beforehand. Application can be done, for example, with a brush for applying PVA (item no. 165 110). After drying, a shiny, strong finish can be seen.
Kč609.07
PVA Separator - ECO (per 1l)

PVA Separator - ECO (per 1l)

eshop_002023/2
PVA Separator - ECO is a liquid product that prevents two materials from sticking together. It is primarily used for separating products from composite and metal molds. PVA Separator is also suitable to combine with a release base wax, which is used as
Kč277.81
PVA Separator - ECO Blue (per 1l)

PVA Separator - ECO Blue (per 1l)

eshop_002023/3
PVA Separator - ECO is a liquid product that prevents two materials from sticking together. It is primarily used for separating products from composite and metal molds. PVA Separator is also suitable for combining with a release base wax, which is used as a
Kč265.73
Separation Base Wax

Separation Base Wax

eshop_002028
Highly effective base wax for base surfaces that are not easily wettable, e.g. laminate molds, silicone, and some metals. When using GRP molds, the base wax improves the wettability of the top surface. The separator itself can then be more easily evenly
Kč529.27
Separation Wax TR 104 397g

Separation Wax TR 104 397g

eshop_002034
High-quality wax-based separator, tested in our operations. The package contains 397g. Separator TR 104 can be replaced by separator TR 216. The separator is also suitable for higher temperatures. Separator TR is not suitable as a base layer under PVA, it causes eye
Kč809.28
Separator - FREWAX

Separator - FREWAX

eshop_900043
Frewax is a separator made from wax and polymer separation agents. This combination offers users the advantages of an easily spreadable wax and a reusable semi-permanent separator. The product must be shaken continuously before and during use.
Kč1,953.11
Separator MAT ultra 41-90

Separator MAT ultra 41-90

eshop_100020/1
Separator MAT ultra 41-90 is a highly release semi-permanent separator that gives the demolded part a matte surface.\n\nApply 4-5 layers without polishing on a clean polished mold. Dry for 15 minutes between layers and then 30 minutes for complete curing.&n
Kč2,876.96
Separator QV 5110 - Vantico

Separator QV 5110 - Vantico

eshop_002032
Pasty separator based on wax containing solvents for general model building (replaces separator QZ 10). Apply the separator with a brush or cloth in a thin layer on the surface of the mold. Once the separator dries (approximately after 30 min.), polish the mold with a soft cloth.
Kč1,619.29
Separator QZ 5111 - Vantico, 0.7 kg, 3.75 kg

Separator QZ 5111 - Vantico, 0.7 kg, 3.75 kg

eshop_002031
Liquid separator based on wax containing solvents for general model building (replaces separator QZ 11). It is applied using a brush or spray gun two to three times at intervals of 10-15 minutes, allowed to dry, and always polished with a soft cloth.
Kč1,592.21
Separator RA-57

Separator RA-57

eshop_900533
Separator RA-57 is a multipurpose, liquid external release agent, based on solvents with a short drying time. The use of this product eliminates the need for repeated waxing and polishing.\nSeparator RA-57 forms a monomolecular film that adheres to the mold and
Kč1,110.37
Standard Microballoons

Standard Microballoons

eshop_002043
Suitable for thickening all resins. It is used wherever it is necessary to apply resin in larger quantities so that it does not run. Microballoons are miniature hollow glass spheres that increase the volume of resins without significantly affecting their properties.
Kč541.72
Titanium White

Titanium White

eshop_900002
Titanium White is suitable for coloring most types of resins. Before mixing it into the resin, we recommend mixing the white pigment in a small amount of resin to create a thicker paste, which can then be used to color the resin itself. Adding a larger amount
Kč107.61
View
Titanium White - sold by kg
  • -Kč398.43

Titanium White - sold by kg

900002
Titanium white is used for coloring polyester and epoxy resins. Recommended max. loading up to 15%. Larger amounts may significantly affect the mechanical properties of the cured resin.
Kč265.62 Kč664.05
Time left
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text