Home

Soric SF 2mm, w. 127 cm

Soric SF 2mm, w. 127 cm

eshop_009066/13
Material similar in structure to Coremat XM, with individual cells formed by hexagons reinforced to prevent material deformation under pressure. There is also type XF-larger cells, LRC-maxi large cells, and type TF-very small cells available.
Kč362.36
View
Soric SF 3mm, w. 127 cm

Soric SF 3mm, w. 127 cm

eshop_009066/14
Material similar in structure to Coremat XM, with individual cells formed by hexagons reinforced to prevent material deformation under pressure. There is also type XF-larger cells, LRC-maxi large cells, and type TF-very small cells available.
Kč352.70
View
Spheretex SN 2 mm. 170g/m2

Spheretex SN 2 mm. 170g/m2

eshop_009025
Special unidirectional fabric for the production of sandwich structures.\nThe fibers of this fabric contain expanded microspheres that increase the structural thickness of the fabric. The material is impregnated with epoxy or polyester resin.
Kč448.38
Spiral tubing 6 mm

Spiral tubing 6 mm

eshop_800018/10
Spiral tubing for resin distribution during vacuum infusion. Inner diameter 4mm outer 6mm.
Kč37.33
Standard Microballoons

Standard Microballoons

eshop_002043
Suitable for thickening all resins. It is used wherever it is necessary to apply resin in larger quantities so that it does not run. Microballoons are miniature hollow glass spheres that increase the volume of resins without significantly affecting their properties.
Kč541.72
Stone Grey Pigment Paste RAL 7030

Stone Grey Pigment Paste RAL 7030

eshop_002056
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Up to 20% of the total resin volume. A larger amount may significantly affect the properties of the cured resin.
Kč2,110.50
Styrene for thinning polyester resins and gelcoats

Styrene for thinning polyester resins and gelcoats

eshop_000019
Styrene is one of the basic raw materials used in the production of polyester, vinylester resins, and gelcoats. It is used independently as a thinner for polyester and vinylester materials. In larger amounts, it can affect the quality and parameters of the cured
Kč245.97
Sulfur Yellow Pigment Paste RAL 1016 /1191/

Sulfur Yellow Pigment Paste RAL 1016 /1191/

eshop_002001
Pigments are suitable for coloring polyester, epoxy or polyurethane resins and gelcoats. Can be colored up to 20% of the resin volume. Larger amounts may significantly affect the parameters of the cured resin.
Kč2,305.96
Technical Acetone

Technical Acetone

eshop_010002
Very effective solvent for cleaning everything you used during laminating. It quickly dissolves polyester, epoxy, and most paints. It is very suitable for degreasing. When purchasing a 200 l drum, a refundable deposit of 1000 CZK/drum is charged for the metal drum.
Kč94.80
TegraCore tl. 1 mm, 2500x590mm

TegraCore tl. 1 mm, 2500x590mm

eshop_900976
AIREX® TegraCore ™ is a closed-cell, extruded thermoplastic polymer foam that combines excellent flame retardant properties with low flammability, smoke, toxicity, and heat release rate, along with high temperature resistance and outstanding lightness
Kč2,441.39
TegraCore tl. 2 mm, 2500x590mm

TegraCore tl. 2 mm, 2500x590mm

eshop_900977
AIREX® TegraCore ™ is a closed, stretchable thermoplastic polymer foam that combines excellent flame retardant properties with low flammability, smoke, toxicity, and heat release rate, along with high temperature resistance and outstanding lightness
Kč2,653.68
TegraCore tl. 6 mm, 2500x590mm

TegraCore tl. 6 mm, 2500x590mm

eshop_900978
AIREX® TegraCore ™ is a closed, stretchable thermoplastic polymer foam that combines excellent flame retardant properties with low flammability, smoke, toxicity, and heat release rate, along with high temperature resistance and excellent lightness
Kč3,519.84
Thinner for epoxy spray gelcoat EG 100-W and EG 100-T

Thinner for epoxy spray gelcoat EG 100-W and EG 100-T

eshop_001047
Thinner for epoxy solvent-based coatings. An addition of 5-20% thinner will significantly change the viscosity of the gelcoat, making it suitable for spraying. A larger amount may significantly alter the properties of the cured gelcoat.
Kč500.72
Thinner for SF30, T 30, T 35 - MGS

Thinner for SF30, T 30, T 35 - MGS

eshop_000014
Manufacturer-recommended thinner for adjusting the viscosity of MGS polyester gelcoats SF 30, T 30, T 35, and T 3 PU to achieve the best results.
Kč685.20
Titanium White

Titanium White

eshop_900002
Titanium White is suitable for coloring most types of resins. Before mixing it into the resin, we recommend mixing the white pigment in a small amount of resin to create a thicker paste, which can then be used to color the resin itself. Adding a larger amount
Kč107.61
View
Titanium White - sold by kg
  • -Kč398.43

Titanium White - sold by kg

900002
Titanium white is used for coloring polyester and epoxy resins. Recommended max. loading up to 15%. Larger amounts may significantly affect the mechanical properties of the cured resin.
Kč265.62 Kč664.05
Time left
Transparent Polyester Casting Resin

Transparent Polyester Casting Resin

eshop_010288/1
It is a colorless, absolutely clear, accelerated, UV stabilized orthophthalic resin with low viscosity and reactivity. APPLICATION. Optimal curing only with Peroxide K1!! The transparent casting resin is primarily intended for applications where ext is required
Kč435.57
Turquoise Blue Pigment Paste RAL 5018

Turquoise Blue Pigment Paste RAL 5018

eshop_002068
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. The pigment paste is made by grinding the pigment with resin between rollers. Because the pigment is very well mixed, only a small amount is needed to color the resin
Kč2,174.19
Tvrdidlo P 11 do EP 512, 531 a 371

Tvrdidlo P 11 do EP 512, 531 a 371

eshop_001040
Hardener P 11 is used for curing epoxy resins in the construction industry, in the production of composites and adhesives. It is a flammable and corrosive liquid with a characteristic odor. The advantage of the hardener is its low mixing ratio, which significantly reduces costs for
Kč980.80
Two-component multipurpose adhesive Araldit AW...

Two-component multipurpose adhesive Araldit AW 106(Araldit 2011)

eshop_001074/1
High-quality multipurpose adhesive with a longer processing time of approximately 120 minutes. Shear strength at 23°C (N/mm2), Tg 47°C, and operating temperature 80°C. Recommended hardener HV 953U and mixing ratio 100:80 by weight. Curing after 100 hours at 23°C.
Kč2,302.66
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text