Home

Showing 277-288 of 770 item(s)

Epoxy Resin LH 300

eshop_111027

Very high-quality, medium-viscosity low-molecular resin for laminating parts with high resistance (up to 160°C). Must be cured at 90°C for a minimum of 3 hours. It is mixed with hardener H 300 (10:25) for temperature resistance up to 120°C or with hardener H 512 (

Kč727.66

Epoxy Resin LH 301

eshop_112216

Epoxy resin LH 301 is a resin that allows achieving temperature resistance of around 160°C with the appropriately selected hardener H 513. When curing with amines or polyamines, it offers high-quality application properties such as high mechanical properties, good ch

Kč625.17

Epoxy Resin LH 330

eshop_111057

Flexible epoxy resin suitable for curing at room temperature. The appropriate hardener is H 330, mixing ratio 100:40 by weight or 100:50 by volume. Gel time at 25 degrees Celsius is 70 min. Thermal resistance 50 degrees Celsius. Viscosity of the mixture at 25 degrees

Kč481.69

Epoxy Resin LH 385

eshop_111242

Epoxy resin LH 385 is characterized by low viscosity. The cured product is slightly flexible.\n\nWhen cured with amines or polyamines, it offers high-quality application properties such as high mechanical properties,\ngood chemical resistance,

Kč505.11

Epoxy Resin LL 201 Casting

111207

The LL 201 casting epoxy resin is a low-viscosity resin based on a mixture of bisphenol A type resins and epichlorohydrin, containing a certain amount of bifunctional epoxy alcohol as a reactive diluent. Mixing ratio 100 : 20 with hardener H 303 HT and H

Kč480.25

Epoxy Resin LR 285+ (Havel)

eshop_000000/xxx

Kč483.15

Epoxy Resin RIVERTABLE WWA

eshop_000034

Pouring epoxy resin designed primarily for creating casts with a thickness of 0-9cm. For example, pouring wooden table slabs into so-called Rivertables, etc.\n\nExcellent UV stability, clarity, colorless with the possibility of tinting using dyes and pigments, curing

Kč590.03

Epoxy Resin Surface Araldite SW 419-1

eshop_001074

Areas of use . tools for sheet forming . general mold production Processing methods Application using a brush or spatula Characteristic features . well spreadable . does not run . minimal sedimentation For curing, it is necessary to mix Hardener HV 2419 in

Kč951.67

Fiberglass mat - marble pattern - dark gray MG 209 width 100cm

eshop_540020

The base consists of a fiberglass mat 30g/m2. After printing one of the designs, the weight increases by 5 - 10 grams/m2. Upon request, the option to choose from multiple designs.

Kč162.52

Filament 160 - polypropylene tape 20 mm, 160°C (roll 1000m)

eshop_900331

Thin polypropylene tape designed not only for the production of tubes and other profiles (binding materials to the mandrel), but also for repairs. Even though the tape is very thin, it can exert a great pressure on the product and thus squeeze out excess resin. We supply it in width

Kč889.44

Filler Clay - Putty (EXTRA SOFT)

eshop_010256/9

Filler clay - putty is a material suitable for minor repairs and adjustments of molds and models. With this material, you can easily and quickly repair chipped edges of molds or perfectly fill gaps in the separating planes of multi-part molds. This material is thermally in

Kč244.80

Filling Clay - Putty

eshop_010256

Filling clay - putty is a material suitable for minor repairs and adjustments of molds and models. With this material, you can easily and quickly repair chipped edges of molds or very perfectly seal gaps in the separating planes of multi-part molds. This material is thermally in

Kč801.59

Product added to wishlist

Product added to compare.

iqitcookielaw - module, put here your own cookie law text