Home

Showing 301-312 of 770 item(s)

FMS - pore filler

eshop_002029/1

FMS is a pore filler for molds. It is suitable for filling the pores of molds (FMS) for molds made of fiberglass-reinforced polyester, epoxy, and other resins. It is used to fill the pores in both new molds and older molds with microporous areas and shallow surfaces.

Kč3,197.59

Foam 29 x 20 mm core for hockey stick repairs SRS

eshop_900135/2

Foam for hockey stick repairs. Available in various lengths, depending on the manufacturer's supply. If the lengths differ from your request, you will be contacted.

Kč122.40

-Kč293.84

Foaming agent EE 2 /HAVEL/ for epoxy foaming resins LH 100 and LH 128

111014

Foaming agent for foaming resins LH 100 and LH 128. Mixing ratio 1-5% by weight. Always mix thoroughly before combining with the hardener. The rule applies that less agent = greater bulk density and more, conversely, less bulk density and lower strength.

Kč3,134.31 Kč3,428.15

Time left

-Kč1,067.22

Foaming Agent EP 50 /MGS/

001034

In the foaming resins L 35, L 36, and L 40, it is mixed with the foaming resin in a ratio of 100:1 to 100:3 max. up to 100:5. The foaming agent must be mixed as thoroughly as possible - preferably mechanically!

Kč3,913.14 Kč4,980.36

Time left

Foaming SYSTEM 5 for hockey stick repair, component A

111247

General: Component A is an epoxy resin modified with special black fillers, characterized by higher viscosity. It is suitable for foaming. Component B is a hardener, a mixture of technical polyalkylene polyamines, primarily containing diethylenetriamine, suitable for

Kč355.74

Foaming SYSTEM 5 for hockey stick repair, component B

111248

Component B is a hardener mixture of technical polyalkylene polyamines, primarily containing diethylenetriamine, suitable for the foaming system. Generally: Component A is an epoxy resin modified with special black color fillers, characterized by higher viscosity. It is suitable

Kč383.91

Foaming SYSTEM 5 for hockey stick repair, component C

111249

Component C is a foaming component. In general: Component A is an epoxy resin modified with special black color fillers, characterized by higher viscosity. It is suitable for foaming. Component B is a hardener, a mixture of technical polyalkylene polyamines, predominantly containing

Kč2,934.86

Formula Five - cleaner and polish 0.95 L

002046

Very effectively removes smudges and fingerprints from resin that occur during assembly, finishing work, or repairs. The product is available on order.

Kč608.32

Formula Five - release wax-1pc -340g

eshop_002046

FORMULA FIVE- release wax for general use, which mixes carnauba wax - the most durable protection in nature - with modern polymers and hydrocarbon waxes. Silicone is added for easy application and facilitates multiple releases

Kč603.94

Frekote 700 NC - separator

eshop_002030

Semi-permanent polymer separator for multiple use for separating all thermosets and most moldable polymers. Ensures high slip where problematic mold geometry complicates polymer processing. 700-NC cures at normal

Kč1,677.13

Frekote B 15 - base separator

eshop_002029

The pore filler fills the micropores of molds and fills in fine scratches on their surface. When used together with other Frekote products, B-15 acts as an excellent base layer that enhances the provided separation capabilities. It is applied with a thin even layer.

Kč5,124.35

Frekote NC 770 - separator

eshop_002055/2

Frekote separator 770-NC is a universal release agent with high slip suitable for cases where there are problems with mold geometry. It cures quickly at room temperature and creates a glossy surface on the castings. It is applied to a clean mold surface by spraying, sh

Kč1,740.81

Product added to wishlist

Product added to compare.

iqitcookielaw - module, put here your own cookie law text