Home

Separation Wax TR 104 397g

Separation Wax TR 104 397g

eshop_002034
High-quality wax-based separator, tested in our operations. The package contains 397g. Separator TR 104 can be replaced by separator TR 216. The separator is also suitable for higher temperatures. Separator TR is not suitable as a base layer under PVA, it causes eye
Kč809.28
Separator - FREWAX

Separator - FREWAX

eshop_900043
Frewax is a separator made from wax and polymer separation agents. This combination offers users the advantages of an easily spreadable wax and a reusable semi-permanent separator. The product must be shaken continuously before and during use.
Kč1,953.11
Separator MAT ultra 41-90

Separator MAT ultra 41-90

eshop_100020/1
Separator MAT ultra 41-90 is a highly release semi-permanent separator that gives the demolded part a matte surface.\n\nApply 4-5 layers without polishing on a clean polished mold. Dry for 15 minutes between layers and then 30 minutes for complete curing.&n
Kč2,876.96
Separator QV 5110 - Vantico

Separator QV 5110 - Vantico

eshop_002032
Pasty separator based on wax containing solvents for general model building (replaces separator QZ 10). Apply the separator with a brush or cloth in a thin layer on the surface of the mold. Once the separator dries (approximately after 30 min.), polish the mold with a soft cloth.
Kč1,619.29
Separator QZ 5111 - Vantico, 0.7 kg, 3.75 kg

Separator QZ 5111 - Vantico, 0.7 kg, 3.75 kg

eshop_002031
Liquid separator based on wax containing solvents for general model building (replaces separator QZ 11). It is applied using a brush or spray gun two to three times at intervals of 10-15 minutes, allowed to dry, and always polished with a soft cloth.
Kč1,592.21
Separator RA-57

Separator RA-57

eshop_900533
Separator RA-57 is a multipurpose, liquid external release agent, based on solvents with a short drying time. The use of this product eliminates the need for repeated waxing and polishing.\nSeparator RA-57 forms a monomolecular film that adheres to the mold and
Kč1,110.37
Silk Grey Pigment Paste RAL 7044

Silk Grey Pigment Paste RAL 7044

eshop_002057
The pigment paste is made by grinding pigment with resin between rollers. Because the pigment is very well mixed, often only a very small amount of pigment paste is needed to color the resin or gelcoat. To color thin layers of gelcoats, it is necessary
Kč966.31
Sleeve Protector (forearm sleeve)

Sleeve Protector (forearm sleeve)

eshop_010203/1
Ideal and inexpensive protection for your work clothes and arms against splashes and dust. The sleeve protector is 55 cm long and protects your sleeves from resin. Especially when laminating into deeper molds, the sleeve protector prevents unwanted contact with resin.
Kč27.09
Small cutting wheel 28 mm, complete

Small cutting wheel 28 mm, complete

eshop_010026/1
A great and time-tested tool for cutting fiberglass and carbon fabrics. Cuts up to 20 layers of fabric at once. You will achieve the longest blade durability and cutting efficiency on a linoleum mat.
Kč145.18
Soric SF 2mm, w. 127 cm

Soric SF 2mm, w. 127 cm

eshop_009066/13
Material similar in structure to Coremat XM, with individual cells formed by hexagons reinforced to prevent material deformation under pressure. There is also type XF-larger cells, LRC-maxi large cells, and type TF-very small cells available.
Kč362.36
View
Soric SF 3mm, w. 127 cm

Soric SF 3mm, w. 127 cm

eshop_009066/14
Material similar in structure to Coremat XM, with individual cells formed by hexagons reinforced to prevent material deformation under pressure. There is also type XF-larger cells, LRC-maxi large cells, and type TF-very small cells available.
Kč352.70
View
Spheretex SN 2 mm. 170g/m2

Spheretex SN 2 mm. 170g/m2

eshop_009025
Special unidirectional fabric for the production of sandwich structures.\nThe fibers of this fabric contain expanded microspheres that increase the structural thickness of the fabric. The material is impregnated with epoxy or polyester resin.
Kč448.38
Spiral tubing 6 mm

Spiral tubing 6 mm

eshop_800018/10
Spiral tubing for resin distribution during vacuum infusion. Inner diameter 4mm outer 6mm.
Kč37.33
Standard Microballoons

Standard Microballoons

eshop_002043
Suitable for thickening all resins. It is used wherever it is necessary to apply resin in larger quantities so that it does not run. Microballoons are miniature hollow glass spheres that increase the volume of resins without significantly affecting their properties.
Kč541.72
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text