Home

Frekote B 15 - base separator

Frekote B 15 - base separator

eshop_002029
The pore filler fills the micropores of molds and fills in fine scratches on their surface. When used together with other Frekote products, B-15 acts as an excellent base layer that enhances the provided separation capabilities. It is applied with a thin even layer.
Kč5,124.35
Frekote NC 770 - separator

Frekote NC 770 - separator

eshop_002055/2
Frekote separator 770-NC is a universal release agent with high slip suitable for cases where there are problems with mold geometry. It cures quickly at room temperature and creates a glossy surface on the castings. It is applied to a clean mold surface by spraying, sh
Kč1,740.81
Glass Fiber Filler 0.2 mm

Glass Fiber Filler 0.2 mm

eshop_002050
Very fine filler for epoxy and polyester resins. Its advantage is the very fine grain size of 0.2mm, which, together with the use of clean glass fibers without impurities, gives the material exceptional properties. By adding this filler to the resin, you will improve
Kč467.05
Glass flour (gray)

Glass flour (gray)

eshop_002069
Suitable as a filler for resins and for many other applications
Kč76.87
Havel Wax 60-x3, 450g

Havel Wax 60-x3, 450g

eshop_900137
Universal release wax agent in paste form for processing polyester and epoxy\nresins.\nSuitable for models, new tools, and continuous production.\nAllows multiple demolding on established tools at temperatures up to 140°C.
Kč821.36
HAVELex 1

HAVELex 1

eshop_002042/2
New special filler that increases viscosity similarly to Aerosil, but smoothly and similarly to microballoons reduces the bulk density of the resin. Due to the fact that the filler is made from a special plastic, it has significantly greater p when mixed with the resin.
Kč3,733.46
Holder 5-7mm, d. 19cm

Holder 5-7mm, d. 19cm

eshop_483010
Solvent resistant. Suitable for shorter rollers with an internal diameter of 6 mm. Length 20 cm.
Kč25.48
holder 6mm, d. 39cm/6mm

holder 6mm, d. 39cm/6mm

eshop_161010
Solvent resistant. Suitable for shorter rollers with an inner diameter of 6 mm. Length 42 cm.
Kč40.34
ISPOFLEX 50 gray 310 ml - replacement for Emfimastic

ISPOFLEX 50 gray 310 ml - replacement for Emfimastic

eshop_900510
ISPOFLEX 50 is a single-component polyurethane elastomer sealant, curing by the action of moisture present in the air or in substrates to form a flexible and durable bond with high adhesion to various materials. AREAS OF USE ISPOFLEX 50 can be used for sealing
Kč199.85
Large Cutting Wheel 60 mm complete - OLFA - RTY - 3/G

Large Cutting Wheel 60 mm complete - OLFA - RTY - 3/G

eshop_010030
A great and time-tested tool for cutting fiberglass and carbon fabrics. Cuts up to 20 layers of fabric at once. The longest blade durability and cutting efficiency are achieved on a Linoleum mat.
Kč614.92
Lightweight Microballoons

Lightweight Microballoons

eshop_002044
Suitable for thickening all resins. Used wherever it is necessary to apply resin in larger quantities so that it does not run. Microballoons are miniature glass hollow spheres that increase the volume of resins without significantly affecting their h
Kč541.72
Liquid Silicone HT 33 - transparent LT

Liquid Silicone HT 33 - transparent LT

eshop_710125
Liquid silicone resin for casting molds and products. It is a firmer form of silicone that, despite this, is very flexible and tear-resistant. Suitable for larger molds or for less shape-demanding molds and products. This type is also popular and sought after.
Kč1,827.20
Liquid Silicone HT 45 - transparent

Liquid Silicone HT 45 - transparent

eshop_710146
Liquid transparent silicone resin suitable for casting molds and products. Processing time 10 min. Demolding time 1 hour 20 minutes. Viscosity: 8,000 cPs. This type is very popular and achieves a Shore A hardness of 45 after curing.
Kč1,581.23
Liquid Silicone ZA 13 - transparent

Liquid Silicone ZA 13 - transparent

eshop_710123
Liquid silicone resin for casting molds and products. It is a very soft type of silicone that, despite this, is very flexible and tear-resistant. Suitable for smaller molds or for geometrically demanding molds and products. This type is also obl
Kč1,803.77
Liquid Silicone ZA 22 - BLUE

Liquid Silicone ZA 22 - BLUE

eshop_710124
Liquid blue silicone resin suitable for casting molds and products. Processing time 15 min. Demolding time 1 hour. Viscosity: 5,000 cPs. This type is very popular and achieves a Shore hardness of 22 after curing. Mixing ratio 1:1 (by weight) K
Kč1,739.35
Maska proti prachu 3M 09322

Maska proti prachu 3M 09322

eshop_010180/1
Means of protecting the respiratory tract in a dusty environment. Temporarily out of stock - we are unlikely to obtain new ones during the epidemic
Kč211.05
Medium Cutting Wheel 45 mm, complete

Medium Cutting Wheel 45 mm, complete

eshop_010028/1
A great and time-tested tool for cutting fiberglass and carbon fabrics. Cuts up to 20 layers of fabric at once. The longest blade durability and cutting efficiency are achieved on a Linoleum mat.
Kč309.51
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text