Home

Hardener C

Hardener C

eshop_001030
Hardener for curing epoxy resin C. Mixing ratio resin:hardener= 100:60 (by weight). Processing time: 50 min. Details can be found in the R+G Handbook p.77/78
Kč812.58
Hardener H 10

Hardener H 10

eshop_111070
Hardener H 10 is used for curing epoxy systems with increased UV stability* primarily for casting, laminating, coating, and adhesive epoxy systems. Processing can take place at a minimum of 10°C. The advantages of the products are excellent smoothness and good surface
Kč566.61
Hardener H 100 for epoxy spray gelcoat EG 100-W and EG 100-T

Hardener H 100 for epoxy spray gelcoat EG 100-W and EG 100-T

eshop_001046
Hardener for epoxy gelcoats. Mixing for EG 100 T: H100= 100:40 and for EG 100 W:H100= 100:26 by weight. Mix the gelcoat and hardener in the prescribed ratio and stir thoroughly. Only then can it be diluted if necessary. Do not load until the coating is fully cured.
Kč1,200.56
Hardener H 10A

Hardener H 10A

eshop_111224
Hardener H 10A is a hardener as a replacement for H10. This hardener is particularly suitable for applications where the requirement is for the clearest possible laminating system. For example, for visible layers made in the first layer from glass fabric with an aluminum surface or in case
Kč659.58
Hardener H 10B

Hardener H 10B

eshop_111227
Hardener in combination with LH 160 and LH 210, ratio 100 to 47. Suitable for encapsulating self-adhesive labels. In a layer of 1-2mm, it provides a bubble-free surface. The surface stops being sticky after about 16-24 hours. Provides a clear, more flexible composite.
Kč581.98
Hardener H 145 (HAVEL)

Hardener H 145 (HAVEL)

eshop_111032
Mixing ratio 100:33, working time 50 min. Must be tempered to at least 50°C
Kč579.78
Hardener H 146

Hardener H 146

eshop_111198
High-quality hardener for curing epoxy resins. The mixing ratio with LH 160, LH 145, and LH 130 is 100:30 by weight, with a processing time of 50-60 min. The minimum curing temperature is 25 °C, but 30 °C and above is recommended.
Kč512.44
Hardener H 147 (HAVEL)

Hardener H 147 (HAVEL)

eshop_111030
Top-quality hardener for epoxy resin LH 160 recommended for the production of certified parts not only in aviation. Mixing ratio 100:25, slow hardener with a working time of 90 min. To achieve the parameters for which this hardener is recommended, it is necessary to tem
Kč566.61
Hardener H 206C

Hardener H 206C

eshop_111226
Hardener H 206C is a hardener for casting epoxy resins. It is suitable for preparing clear composites for all types of laminations at temperatures above 15°C. The cured resin is not brittle and does not require conditioning, although higher thermal resistance of the cured resin can be achieved.
Kč722.53
Hardener H 25

Hardener H 25

eshop_111067
Hardener H 25 was developed as a replacement for P 11. Unlike hardener P 11, no harmful vapors are released during processing, and additionally, the cured epoxy exhibits significantly higher strengths. The hardener is suitable not only as a replacement in epoxy resins from Spolchemi
Kč629.30
Hardener H 282

Hardener H 282

eshop_112219/1
Cured polyvinyl chloride foam for the production of sandwich structures with higher thermal resistance. Panel size: 2150x1000 mm. Suitable for laminating and bonding with polyester, vinylester, or epoxy. PVC foam coated with glass, aramid, carbon or
Kč433.37
View
Hardener H 285 HAVEL

Hardener H 285 HAVEL

eshop_111260/1
The laminating resin and hardener system was developed as a direct replacement for the well-known LR 285 system from MGS (Hexion). It is suitable for the production of composites using glass, carbon, and aramid fibers and is characterized by high static and dynamic properties.
Kč737.91
Hardener H 286 HAVEL

Hardener H 286 HAVEL

eshop_111091
The laminating resin and hardener system was developed as a direct replacement for the well-known LR 285 system from MGS (Hexion). It is suitable for the production of composites using glass, carbon, and aramid fibers and is characterized by high static and dynamic properties.
Kč702.77
Hardener H 287 HAVEL

Hardener H 287 HAVEL

eshop_111260
The laminating resin and hardener system was developed as a direct replacement for the well-known LR 285 system from MGS (Hexion). It is suitable for the production of composites using glass, carbon, and aramid fibers and is characterized by high static and dynamic properties.
Kč1,057.08
Hardener H 289

Hardener H 289

eshop_111118/2
Characteristics: it is a liquid hardener for epoxy resins. The hardener is based on cycloaliphatic polyamine. Physical parameters: Viscosity at 25°C 7 - 11 m Pa.s. Hydrogen equivalent 59 g Density at 20 °C 930- 960 kg/m 3 Application: Hardener H 289 is
Kč742.30
Hardener H 300

Hardener H 300

eshop_111025
Fast hardener with reduced exotherm, high temperature resistance (approx. 90°C) and high flexibility. Used in HAVEL and MGS epoxy resins. We recommend tempering at a minimum of 50°C. Hardening ratio 100:25
Kč934.10
Hardener H 330

Hardener H 330

eshop_111059
H 330 is suitable for epoxy LH 330, mixing ratio epoxy:hardener = 100:40 by weight or 100:50 by volume. Gel time at 25 degrees Celsius is 70 min. Thermal resistance is 50 degrees Celsius. Viscosity of the mixture at 25 degrees Celsius is 450 mPas/s. The material was developed
Kč547.57
Hardener H 505

Hardener H 505

eshop_111118
Hardener H 505 is a hardener for epoxy resins. It is suitable for all types of laminations at temperatures above 15°C. Higher thermal resistance of the cured resin can be achieved by post-curing the system at an elevated temperature of 50-60 °C. It belongs to the so-called fast hardeners. Hard
Kč512.44
Hardener H 507

Hardener H 507

eshop_111206
Characteristics: it is a liquid hardener for epoxy resins. The hardener is based on cycloaliphatic polyamine and does not contain nonylphenol. Physical parameters: Viscosity at 25°C (m Pa.s.) 7 - 11 Hydrogen equivalent g/mol 50 Density at 20 °C kg/m 3 930-
Kč513.90
Hardener H 507 A

Hardener H 507 A

eshop_111206/1
Hardener H 507 A is suitable for all types of laminations at temperatures above 15°C. Higher thermal resistance of the cured resin can be achieved by post-curing the system at an elevated temperature of 50-60 °C. Working time is approximately 40 minutes. The low viscosity of the mixture ensures quick
Kč573.93
Hardener H 508

Hardener H 508

eshop_111205
Characteristics: it is a liquid hardener for epoxy resins. The hardener is based on cycloaliphatic polyamine, the main component is Isophorone diamine. It does not contain nonylphenol. Physical parameters: Viscosity at 25°C (m Pa.s) 7 - 11 Hydrogen equivalent (g/mol)
Kč540.25
Hardener H 509

Hardener H 509

eshop_111114
Hardener H 509 is a hardener for epoxy resins. It is suitable for all types of laminations at temperatures above 15°C. Higher thermal resistance of the cured resin can be achieved by post-curing the system at an elevated temperature of 50-60 °C. Working time is approximately 70-90 m
Kč600.28
Hardener H 512

Hardener H 512

eshop_111210
Hardener H 512 is a liquid low-viscosity hardener for epoxy resins. The hardener is based on cyclic diamine. It is suitable for all types of laminations at temperatures above 15°C and where high thermal resistance is required. For proper curing, it is
Kč563.68
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text