Home

Liquid Silicone ZA 13 - transparent

Liquid Silicone ZA 13 - transparent

eshop_710123
Liquid silicone resin for casting molds and products. It is a very soft type of silicone that, despite this, is very flexible and tear-resistant. Suitable for smaller molds or for geometrically demanding molds and products. This type is also obl
Kč1,803.77
Liquid Silicone ZA 22 - BLUE

Liquid Silicone ZA 22 - BLUE

eshop_710124
Liquid blue silicone resin suitable for casting molds and products. Processing time 15 min. Demolding time 1 hour. Viscosity: 5,000 cPs. This type is very popular and achieves a Shore hardness of 22 after curing. Mixing ratio 1:1 (by weight) K
Kč1,739.35
Microcellulose powder - white

Microcellulose powder - white

eshop_002041
Suitable for thickening all resins. It is used wherever it is necessary to apply resin in larger quantities so that it does not run. It thickens by adding a smaller amount of filler. Due to its low price, it is among the popular fillers. It can also be successfully mixed
Kč218.88
PVA Brush Width 45 mm

PVA Brush Width 45 mm

eshop_002025
Working part made of foam moltopren. Suitable for manual applications. Replacement working moltopren part can be ordered.
Kč155.78
PVA Separator - Coating R+G

PVA Separator - Coating R+G

eshop_002024
Separator for epoxy, vinylester, and polyester resins up to max. 100°C. To create a primary layer, use a release wax beforehand. Application can be done, for example, with a brush for applying PVA (item no. 165 110). After drying, a shiny, strong finish can be seen.
Kč609.07
PVA Separator - ECO (per 1l)

PVA Separator - ECO (per 1l)

eshop_002023/2
PVA Separator - ECO is a liquid product that prevents two materials from sticking together. It is primarily used for separating products from composite and metal molds. PVA Separator is also suitable to combine with a release base wax, which is used as
Kč277.81
PVA Separator - ECO Blue (per 1l)

PVA Separator - ECO Blue (per 1l)

eshop_002023/3
PVA Separator - ECO is a liquid product that prevents two materials from sticking together. It is primarily used for separating products from composite and metal molds. PVA Separator is also suitable for combining with a release base wax, which is used as a
Kč265.73
Separation Base Wax

Separation Base Wax

eshop_002028
Highly effective base wax for base surfaces that are not easily wettable, e.g. laminate molds, silicone, and some metals. When using GRP molds, the base wax improves the wettability of the top surface. The separator itself can then be more easily evenly
Kč529.27
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text