Shopping Cart
There are no more items in your cart
*Epoxy HAVEL*
Polyester resins and gelcoats
Glass fabrics
Yarn
Aeroglass
TAPES AND BRAIDS
Pigments
Home
Carbon tape diagonal 30 mm 265321 - CB - 4.31 g/bm (2734)
eshop_008061/1
0,128 kg/m2 ****0,431 kg/100m.
Kč165.08
Kč168.01
Kč135.43
Carbon unidirectional tape TCU 125 width 50mm
eshop_008059/2
Tape suitable for longitudinal reinforcement of composite products. 127 g/m2, fabric, number of fibers per cm2 warp x weft 5x4x2 used fiber in the warp 3K HR and in the weft EC9 34 tex ratio warp / weft 79/21, thickness 0.13 mm.
Kč103.22
Carbon unidirectional tape TCU 175 width 50 mm 17.54.11 - 119872500
eshop_008059/1
Tape suitable for longitudinal reinforcement of composite products. 167g/m2, fabric, number of fibers per cm2 warp x weft 7 x4x2 used fiber in the warp 3K HR and in the weft EC9 34 tex ratio warp / weft: 84/16, thickness 0.17 mm
Kč123.86
Carbon unidirectional tape TCU 175, 164g/m2 width 100 mm
eshop_008056/1
Tape suitable for longitudinal reinforcement of composite products. 167g/m2, fabric, number of fibers per cm2 warp x weft 7 x4x2 used fiber in the warp 3K HR and in the weft EC9 34 tex ratio warp / weft:84/16, thickness 0.17 mm.
Kč240.84
Carbon unidirectional tape TCU 260 width 50 mm
eshop_008058
Tape suitable for longitudinal reinforcement of composite products. 255g/m2, fabric, number of fibers per cm2 warp x weft 5.7 x2x2 used fiber in the warp 6K HR and in the weft EC9 68 tex warp/weft ratio: 89/11, thickness 0.26 mm
Kč151.39
Carbon unidirectional tape TCU 260, width 100 mm
eshop_008135
Tape suitable for longitudinal reinforcement of composite products. 255g/m2, fabric, number of fibers per cm2 warp x weft 5.7 x2x2 used fiber in the warp 6K HR and in the weft EC9 68 tex warp/weft ratio: 89/11, thickness 0.26 mm.
Kč273.13
Clear Epoxy Gelcoat EG 100-T - for thin layers
eshop_001045
This epoxy gelcoat can be applied solely by spraying. It can also be applied as a brush coating. The secret to smooth surfaces. It creates a smooth visible layer depending on the surface of the mold. The surface does not require any further treatment after being removed from the mold.
Kč1,142.00
Clear Polyester Gelcoat GS 100 S - Norpol GS Base - S
eshop_000015
The secret of smooth surfaces. Creates a smooth visible layer depending on the surface of the mold. The surface requires no further treatment after removal from the mold. You create the surface directly in the mold. Financial and effective savings. Pigments can be used for coloring
Kč363.83
Cobalt Accelerator for Curing Polyester and Vinyl Ester Resins 1 %
eshop_000026
Accelerates the curing process. Some resins are not pre-accelerated for various reasons. This accelerator allows you to accelerate them just before processing. The standard addition of the accelerator is 0.5-3% of the weight of the resin used. WARNING DO NOT MIX ACCELERATOR WITH CATALYST
Kč531.47
Crystic U 1131 T (ortho) self-extinguishing polyester resin for DIN 5510
eshop_900581
CRYSTIC U 1131 T is a filled, orthophthalic, non-accelerated thixotropic unsaturated polyester resin with low styrene content. It is suitable for fire-resistant/self-extinguishing laminates with reduced smoke generation. CRYSTIC U 1131 T is halogen-free and does not contain heavy
Kč140.55
Kč55.64
Diolen tape diagonally woven width 30 mm (030.265301100280 DB) (2731)- 10.00 g/bm
eshop_008042
Hmotnost 10 g/bm
Kč44.66
Diolen tape woven diagonally width 20 mm, 020.26534550-DB (2238)- 3.9 g/bm
eshop_008105
Material directly for reinforcing the edges of laminated parts. It shapes well according to the shape of the substrate. Due to the diagonal weaving method, it is also suitable for very complex shapes. Finished edges. Weight 3.9 g/bm
Kč40.19
Kč636.88
Epodur 619-0600 component B
eshop_001069
Colorless hardener, suitable for casting systems or laminating with a longer processing time: approx. 4 hours.\n\nRiver table. Mixing ratio epoxy:hardener=100:40 by weight. Maximum layer 2cm. Subsequent curing required min. 50°C for 3 hours!
Kč975.09
Eporezit - T600 (slower hardener)
eshop_610032
Characteristics: it is a liquid hardener for casting epoxy resins. solvent-free Not\ntoxic. It is a modified aliphatic polyamide with low exothermic reaction and long\nprocessing time, characterized by low viscosity. T-600
Kč1,223.99
Epoxidová pryskyřice L 285 (MGS)
eshop_001007
Very high-quality resin for the aerospace industry and for model making. The resin with hardener creates a very viscous mixture, allowing the fibers to be quickly and thoroughly impregnated. As a result, the product has significantly lower weight and higher utility value. More details
Kč945.81
Epoxy gelcoat 7060 clear
eshop_900882
UV stabilized transparent epoxy gelcoat for the visible layer of carbon parts, more information in TL and BL:
Kč1,541.70