Home

Showing 97-108 of 108 item(s)

Glass tape with colored stripe 119848300, weight 150 g/m2, width 30 mm

eshop_008115

(red, green, blue, yellow) weight 150 g/m2, width 30 mm

Kč22.40

Glass tape with colored stripe 119849200, weight 173 g/m2, width 20 mm

eshop_008029

(red, green, blue, yellow) weight 173 g/m2, width 20 mm.

Kč31.19

Glass tape with colored stripe 119849500, weight 173 g/m2, width 50 mm

eshop_008054

(red, green, blue, yellow) weight 173 g/m2, width 50 mm.

Kč33.60

glass tape with colored stripe 119849600, weight 173 g/m2, width 60 mm

eshop_008125

(red, green, blue, yellow) weight 173 g/m2, width 60 mm.

Kč26.05

Glass tape with colored stripe, 119848400, weight 150 g/m2, width 40 mm

eshop_008049

(red, green, blue, yellow) weight 150 g/m2, width 40 mm

Kč29.87

Glass-carbon sleeve diameter 50 mm, 050.12040222136- KCS1

eshop_008002/1

Diameter 50 mm. with fiber orientation at an angle of 45°.

Kč63.03

Glass-carbon sock 32 mm,10040302136-ASC - glass dyed red

eshop_008004/1

Kč249.12

Liquid Silicone HT 33 - transparent LT

eshop_710125

Liquid silicone resin for casting molds and products. It is a firmer form of silicone that, despite this, is very flexible and tear-resistant. Suitable for larger molds or for less shape-demanding molds and products. This type is also popular and sought after.

Kč1,827.20

Liquid Silicone HT 45 - transparent

eshop_710146

Liquid transparent silicone resin suitable for casting molds and products. Processing time 10 min. Demolding time 1 hour 20 minutes. Viscosity: 8,000 cPs. This type is very popular and achieves a Shore A hardness of 45 after curing.

Kč1,581.23

Liquid Silicone ZA 13 - transparent

eshop_710123

Liquid silicone resin for casting molds and products. It is a very soft type of silicone that, despite this, is very flexible and tear-resistant. Suitable for smaller molds or for geometrically demanding molds and products. This type is also obl

Kč1,803.77

Liquid Silicone ZA 22 - BLUE

eshop_710124

Liquid blue silicone resin suitable for casting molds and products. Processing time 15 min. Demolding time 1 hour. Viscosity: 5,000 cPs. This type is very popular and achieves a Shore hardness of 22 after curing. Mixing ratio 1:1 (by weight) K

Kč1,739.35

Thixotropic additive for silicones - Additix 54 - pack. 50g

eshop_900272/1

The thixotropic agent added to silicone prevents the silicone from dripping off vertical surfaces. The addition to silicone is 3-5%.\n\n(Not classified as a hazardous substance or preparation.)

Kč296.48

Product added to wishlist

Product added to compare.

iqitcookielaw - module, put here your own cookie law text