Home

Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
CARBON, GLASS AND ARAMID ROWINGS
CARBON, GLASS AND ARAMID ROWINGS
FABRICS
FABRICS
TAPES AND BRAIDS
TAPES AND BRAIDS
PRE-PREGs
PRE-PREGs
NON-WOVEN FABRICS, FIBERGLASS MATS, FLEECE
NON-WOVEN FABRICS, FIBERGLASS MATS, FLEECE
SANDWICH MATERIALS
SANDWICH MATERIALS
Polyurethane foams
Polyurethane foams
SILICONES
SILICONES
RELEASE AGENTS AND FILLERS
RELEASE AGENTS AND FILLERS
Pigments for colouring
Pigments for colouring
Putties, Thinners
Putties, Thinners
AUXILIARY MATERIALS AND ACCESSORIES
AUXILIARY MATERIALS AND ACCESSORIES
Others
Others
Materials by Technology
Materials by Technology
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
3-piece pins for molds 5/8 mm (1 pack 3 pcs)

3-piece pins for molds 5/8 mm (1 pack 3 pcs)

eshop_010141/1
Metal pins for precise positioning of multi-part molds. The advantage of these pins is that they can be removed from the metal insert in the parting line at any time and do not interfere during separation. Suitable in combination with bushings for mold clamping with screws.
Kč141.87
3M 7500 Half Mask Size L

3M 7500 Half Mask Size L

eshop_010093/B
Proven and high-quality half mask that effectively protects you from hazardous organic vapor emissions. These vapors are released from most resins and paints used not only in the production of laminates, and therefore by using this half mask with the prescribed filters you can ch
Kč1,745.35
Acralock SA 10-05 BLK 50ml , 10:1

Acralock SA 10-05 BLK 50ml , 10:1

eshop_001099/24
advanced two-component methacrylate adhesives designed for the chemical bonding of most surfaces, creating strong joints and integrated assemblies from steel, aluminum, engineering plastics, modern composites, and other materials. Packaged directly in an application cartridge
Kč555.63
Activated Carbon MAC6D40

Activated Carbon MAC6D40

eshop_010118
Activated carbon is used as a filler for filters for air and water filtration. This material will ensure the filtration of contaminated air from your laminating or painting shop when used correctly.
Kč216.69
Adhesive Spray Infutac - 500 ml - clear

Adhesive Spray Infutac - 500 ml - clear

eshop_900237/1
Contact adhesive spray for temporary bonding of fabrics before saturation.\n\nINFUTAC is designed for the installation of dry reinforcements, etc. in vacuum, infusion, and RTM processes.\n\nBonding of hybrid materials\nOptimal adhesion during curing
Kč571.00
Adhesive spray Infutac - 500 ml - green

Adhesive spray Infutac - 500 ml - green

eshop_900237
Contact adhesive spray for temporary attachment of fabrics before impregnation.\n\nINFUTAC is designed for the installation of dry reinforcements, etc. in vacuum, infusion, and RTM processes.\n\nAttachment of hybrid materials\nOptimal adhesion during shaping
Kč614.92
Battery scissors - E.C.CUTTER 2965.011.000

Battery scissors - E.C.CUTTER 2965.011.000

eshop_010177/1
Electric scissors suitable for cutting fabrics, paper, films, and other materials. These scissors can easily handle aramid fabric. Easy and precise work. The delivery of the scissors includes the scissors with a battery and a universal cutting attachment. Furthermore, it is in the edge
Kč6,368.84
Bubble Wrap BULPACK

Bubble Wrap BULPACK

eshop_003007/2A
Bubble wrap is especially suitable for packaging your products. It protects your products primarily from impact.
Kč13.54
Carbon Fiber Rod 4x1000 mm.

Carbon Fiber Rod 4x1000 mm.

eshop_010121/4
Carbon rod with a diameter of 4 mm. It is made from carbon fibers and high-quality epoxy resin using pultrusion. (the technology of continuous pulling of saturated carbon fibers through an exact metal mold that is heated) For larger quantities, it is possible
Kč300.14
View
Carbon fiber rod diameter 3 mm, length 1000 mm

Carbon fiber rod diameter 3 mm, length 1000 mm

eshop_010211/10
Carbon fiber rod diameter 3 mm. It is made from carbon fibers and high-quality epoxy resin using pultrusion. (the technology of continuous drawing of saturated carbon fibers through an exact metal mold that is heated) For larger quantities, it is possible
Kč240.11
View
carbon tubes 10x8x1000 mm

carbon tubes 10x8x1000 mm

eshop_010169/2
Carbon tubes made by pultrusion ensure relatively precise dimensions with small tolerance. They have a smooth surface both outside and inside.\nPultrusion is a technology in which pre-impregnated carbon or glass fibers are drawn through a heated metal mold and are
Kč567.70
carbon tubes 6x4x1000 mm

carbon tubes 6x4x1000 mm

eshop_010130/3a
Carbon tubes manufactured by pultrusion ensure relatively precise dimensions with a small tolerance. They have a smooth surface both outside and inside. Pultrusion is a technology in which pre-impregnated carbon or glass fibers are drawn through a heated metal mold and js
Kč585.27
Clamp Valve for Infusions

Clamp Valve for Infusions

eshop_900920
Screw valve for tightening input and output hoses, especially in vacuum infusion techniques for composite manufacturing. The valve is made of metal components and excels in durability and reusability. With proper handling, there is no contamination.
Kč1,225.45
Compressed Sponge

Compressed Sponge

eshop_010324
An excellent helper for underwater sanding. Very absorbent sponge gentle on surfaces. Delivered in a compressed state and expands after soaking in water.
Kč104.68
Device for distilling contaminated acetone and other...

Device for distilling contaminated acetone and other solvents 20L

eshop_900606
Small and handy device for distilling contaminated solvents with a capacity of 20L, consumption 1.2Kw/h, stainless steel design ATEX. Maintenance-free device with a payback period of 5-7 months. Devices for 50, 150, and 500 liters are also available. Delivery on order 10-14 days. Goods
Kč319,788.72
Distribution mesh OM 70 - 180g/m2 w.650mm - green

Distribution mesh OM 70 - 180g/m2 w.650mm - green

eshop_900282
Distribution mesh with high porosity allowing good airflow and resin flow, OM70 is recommended for vacuum or infusion technologies with polyester or epoxy.\n\nAvailable in INFUPLEX version (combined with perforated film) for easier
Kč113.32
Filament 160 - polypropylene tape 20 mm, 160°C (roll 1000m)

Filament 160 - polypropylene tape 20 mm, 160°C (roll 1000m)

eshop_900331
Thin polypropylene tape designed not only for the production of tubes and other profiles (binding materials to the mandrel), but also for repairs. Even though the tape is very thin, it can exert a great pressure on the product and thus squeeze out excess resin. We supply it in width
Kč889.44
Filler Clay - Putty (EXTRA SOFT)

Filler Clay - Putty (EXTRA SOFT)

eshop_010256/9
Filler clay - putty is a material suitable for minor repairs and adjustments of molds and models. With this material, you can easily and quickly repair chipped edges of molds or perfectly fill gaps in the separating planes of multi-part molds. This material is thermally in
Kč244.80
Filling Clay - Putty

Filling Clay - Putty

eshop_010256
Filling clay - putty is a material suitable for minor repairs and adjustments of molds and models. With this material, you can easily and quickly repair chipped edges of molds or very perfectly seal gaps in the separating planes of multi-part molds. This material is thermally in
Kč801.59
Filter holder for 3M 501, 7500 chemical mask

Filter holder for 3M 501, 7500 chemical mask

eshop_010096
Plastic holders 501 for half mask 7500 are a necessary accessory for securing dust filters P2 to the basic carbon filters 6055A2 used with the chemical half mask.
Kč205.22
Filters for 3M 6055A2 chemical mask - chemical

Filters for 3M 6055A2 chemical mask - chemical

eshop_010094
Chemical filters A2 are very effective and reliably filter organic vapors, protecting you from inhalation. Think about your health before it's too late! For maximum filter lifespan, we recommend using dust pre-filters, which protect you and chemicals
Kč689.01
FLO-KING Plastic Drum Tap - Large

FLO-KING Plastic Drum Tap - Large

eshop_010165/1
The polyethylene drain tap is suitable for draining larger quantities of materials from metal drums with a corresponding opening. In our offer, you will also find a smaller drain tap that is suitable for draining smaller quantities of material.
Kč1,125.16
FLO-RITE Plastic Drum Tap - Small

FLO-RITE Plastic Drum Tap - Small

eshop_010165/2
The polyethylene drain tap (small) is suitable for draining smaller quantities of materials from metal drums with the appropriate opening. In our offer, you will also find a larger drain tap that is suitable for draining larger quantities of material.
Kč137.99
Holder 5-7mm, d. 19cm

Holder 5-7mm, d. 19cm

eshop_483010
Solvent resistant. Suitable for shorter rollers with an internal diameter of 6 mm. Length 20 cm.
Kč25.48
holder 6mm, d. 39cm/6mm

holder 6mm, d. 39cm/6mm

eshop_161010
Solvent resistant. Suitable for shorter rollers with an inner diameter of 6 mm. Length 42 cm.
Kč40.34
ISPOFLEX 50 gray 310 ml - replacement for Emfimastic

ISPOFLEX 50 gray 310 ml - replacement for Emfimastic

eshop_900510
ISPOFLEX 50 is a single-component polyurethane elastomer sealant, curing by the action of moisture present in the air or in substrates to form a flexible and durable bond with high adhesion to various materials. AREAS OF USE ISPOFLEX 50 can be used for sealing
Kč199.85
Large Cutting Wheel 60 mm complete - OLFA - RTY - 3/G

Large Cutting Wheel 60 mm complete - OLFA - RTY - 3/G

eshop_010030
A great and time-tested tool for cutting fiberglass and carbon fabrics. Cuts up to 20 layers of fabric at once. The longest blade durability and cutting efficiency are achieved on a Linoleum mat.
Kč614.92
Maska proti prachu 3M 09322

Maska proti prachu 3M 09322

eshop_010180/1
Means of protecting the respiratory tract in a dusty environment. Temporarily out of stock - we are unlikely to obtain new ones during the epidemic
Kč211.05
Medium Cutting Wheel 45 mm, complete

Medium Cutting Wheel 45 mm, complete

eshop_010028/1
A great and time-tested tool for cutting fiberglass and carbon fabrics. Cuts up to 20 layers of fabric at once. The longest blade durability and cutting efficiency are achieved on a Linoleum mat.
Kč309.51
Modeling material for sculptural purposes (pack. 10 kg)

Modeling material for sculptural purposes (pack. 10 kg)

eshop_900195
Inexpensive modeling clay suitable for making models. Modeling material for sculptural purposes. Packaging 10 kg. The price is stated per unit!! The unit is kilogram, so the basic packaging has 10kg = 10 units.\n\nThe minimum order is 10kg. Sale in whole packs
Kč55.64
MTI-line membrane infusion hose (diameter 15/8mm)

MTI-line membrane infusion hose (diameter 15/8mm)

eshop_900871
MTI® stands for infusion using a membrane tube and describes a suction hose wrapped in a membrane for vacuum infusion.\nThe MTI® hose is an air-permeable and resin-blocking tube for evacuating air, allowing for easy use
Kč222.54
NOBBY - metal roller 25 x 150 mm

NOBBY - metal roller 25 x 150 mm

eshop_503334
A new type of roller that is suitable for releasing bubbles, especially in larger thicknesses of laminate. Due to the transverse and longitudinal grooving, it creates spikes and is therefore also suitable for laminates made of glass fabrics in larger thicknesses and weights.
Kč230.60
NOBBY - metal roller 25 x 75 mm

NOBBY - metal roller 25 x 75 mm

eshop_503332
A new type of roller that is suitable for releasing bubbles, especially in larger thicknesses of laminate. Due to the transverse and longitudinal grooving, it creates spikes and is therefore also suitable for laminates made of glass fabrics in larger thicknesses and grammages.
Kč214.12
View
OLFA Cutting Knife with Automatic Blade Lock, BN-AL

OLFA Cutting Knife with Automatic Blade Lock, BN-AL

eshop_010035/9
We have personally tested the very high-quality OLFA snap-off knife in our workshops. It is very safe and has an automatic blade lock. You can also order replacement blades OLF, which we can highly recommend.
Kč456.80
P2 Dust Filters for 3M Chemical Mask - Dust 7500

P2 Dust Filters for 3M Chemical Mask - Dust 7500

eshop_010095
P2 dust filters effectively protect the carbon filters 6055A2 from clogging with dust and aerosol, thus significantly extending their lifespan. We definitely recommend them especially when spraying gelcoats and paints. Plastic holders with a diameter must be ordered for the filters.
Kč313.61
PADDLE - metal roller 19 x 100 mm

PADDLE - metal roller 19 x 100 mm

eshop_503325
A frequently used roller that is particularly suitable for products made of polyester resin and glass mat. It evenly regulates the amount of resin across the entire surface of the laminate.
Kč164.71
View
PADDLE - metal roller 25 x 100 mm

PADDLE - metal roller 25 x 100 mm

eshop_503328
A frequently used roller that is particularly suitable for products made of polyester resin and glass mat. It evenly regulates the amount of resin across the entire surface of the laminate.
Kč197.65
View
PADDLE - metal roller 25 x 150 mm

PADDLE - metal roller 25 x 150 mm

eshop_503330
A frequently used roller that is particularly suitable for products made of polyester resin and fiberglass mat. It evenly regulates the amount of resin across the entire surface of the laminate.
Kč214.12
View
PE hose width 1000 mm thickness 0.05 sleeve

PE hose width 1000 mm thickness 0.05 sleeve

eshop_010144
Sleeve made of polyethylene film with a thickness of 0.05 mm. The width of the sleeve in the folded state is 1000 mm. Suitable for weaker vacuum up to 0.4 and vacuuming parts made of epoxy resins. Caution with polyesters and vinyl esters, please use a more resistant styrene film APA
Kč240.11
PE hose width 1000 mm thickness 0.10 sleeve

PE hose width 1000 mm thickness 0.10 sleeve

eshop_010145
Sleeve made from polyethylene film with a thickness of 0.1 mm. The width of the sleeve in its folded state is 1000 mm. Suitable for vacuum up to 0.9 and vacuuming parts made of epoxy resins. Be careful with polyesters and vinyl esters, please use a more resistant styrene film APA or HAV
Kč158.85
Peel Ply Fabric 50 g/m2, PLUS, width 152cm white

Peel Ply Fabric 50 g/m2, PLUS, width 152cm white

eshop_010003
A great helper not only for vacuuming. WIDTH 152 cm. The same peel ply fabric 50 with a special surface treatment for easier removal. A significant advantage especially for more complex products and for larger amounts of extracted resin. The advantage of this modified peel ply
Kč182.72
Perforated separation film ELA20 - blue - 125°C P1

Perforated separation film ELA20 - blue - 125°C P1

eshop_010186/6
This perforated film is primarily used during the vacuuming of laminated parts. In this technology, it is often not enough to rely solely on the release fabric, which ensures the passage of excess air and resin into the suction mat. The release fabric also ensures the following
Kč63.03
peroxide dispenser - Dosimeter 1000ml

peroxide dispenser - Dosimeter 1000ml

eshop_010176/3
Great tool (see picture - larger, oval container) for easy dosing of peroxide into polyester and vinylester resins as well as gelcoats. The work is made easier primarily by the very practical and adjustable plastic straw with an opening. You can set the dispenser according to the
Kč869.68
Peroxide Dispenser - Dosimeter 500ml

Peroxide Dispenser - Dosimeter 500ml

eshop_010176
A great tool (smaller square type - see image) for easy dosing of peroxide into polyester and vinylester resins as well as gelcoats. The work is made easier primarily by a very practical and adjustable plastic straw with an opening. You can set the dispenser according to your needs
Kč790.61
Plastic bowl 500 g, round 101 x 101 mm

Plastic bowl 500 g, round 101 x 101 mm

eshop_46500
Plastic, clear cup for mixing resins and paints made of durable polypropylene. Capacity 500 ml.\nThe package contains 1000 pcs. Smaller quantities can also be ordered individually, see price list.
Kč2.42
Plastic bowl 500ml, diameter 15.5 cm

Plastic bowl 500ml, diameter 15.5 cm

eshop_43500
The plastic bowl 500 ml has a diameter of 15.5 cm. It has 2 practical handles for holding. It is resistant to polyester and epoxy resins and acetone. It is made of polypropylene and cured resin residues can be easily peeled out of the bowl.
Kč2.20
Plastic Canister 10 l including lid

Plastic Canister 10 l including lid

eshop_010103
Square canister with handle including lid. Versatile use for liquid and bulk materials Suitable for water, wine, oil, and some chemicals.
Kč92.24
Plastic round bowl, 500ml, 46975 (low)

Plastic round bowl, 500ml, 46975 (low)

eshop_15865
Plastic, clear cup for mixing resins and paints made of durable and thicker polypropylene. Volume 500 ml. The package contains 1000 pcs. Smaller quantities can also be ordered individually, see price list. §! Due to rounding of small amounts, please consider only the price
Kč4.83
Plastic Wedge - Medium 55 x 150 mm

Plastic Wedge - Medium 55 x 150 mm

eshop_010373
The plastic wedge is made of tough and durable plastic. It is used for removing laminated parts from molds in places where it is necessary to create pressure between the mold and the part. The material from which the wedge is made is very gentle on the surfaces of molds and finished products.
Kč199.12
Plastic Wedge - Small 40 x 100 mm

Plastic Wedge - Small 40 x 100 mm

eshop_010372
The plastic wedge is made of tough and durable plastic. It is used for removing laminated parts from molds in places where it is necessary to create pressure between the mold and the part. The material from which the wedge is made is very gentle on the surfaces of molds and finished products.
Kč180.08
Polishing Paste White RIWAX

Polishing Paste White RIWAX

eshop_010378
High-quality polishing paste popular and tested in our workshops. Silicone-free. For final polishing, use Riwax green paste.
Kč790.61
Potex Antistatic Paper Coverall with Hood Size 56-58

Potex Antistatic Paper Coverall with Hood Size 56-58

eshop_010181/3
Thin coverall with a hood made of non-woven fabric 60g/m2 antistatic and dust-resistant. Short-term protection against accidental splashes of diluted chemicals. Complies with standards F 1006Aa, ČSN EN 340, EN 1149-5, CE 1023.
Kč254.97
Primalona - hand cream

Primalona - hand cream

eshop_900000
High-quality metal drum with a large and tight lid. The delivery includes a robust lever hoop for easy sealing of the drum, including a plastic seal. This drum has an ADR certificate for the storage and transport of hazardous substances. The drum is a perfect solution
Kč541.72
RADIUS - metal roller 25 x 100 mm

RADIUS - metal roller 25 x 100 mm

eshop_503360
Roller with cross-grooving and barrel shape, making it suitable for pushing out bubbles and resin in shaped laminates. The barrel shape of the roller allows it to respond to various curvatures of the mold and adjust the path of the roller accordingly.
Kč247.07
Reactivated Carbon MAC6D40

Reactivated Carbon MAC6D40

eshop_010118/2
Reactivated activated carbon is used as a filling for extraction filters in laminating shops, paint shops, and other operations that use materials containing organic substances, just like non-reactivated carbon. Activated carbon, due to its enormous porosity, has over 1000 m2 of surface area.
Kč171.30
Release Fabric 64g/m2, with red stripe, width 1630mm

Release Fabric 64g/m2, with red stripe, width 1630mm

eshop_900281
A great helper not only during vacuuming. It separates the final product from auxiliary materials /suction mat/ and simultaneously allows the resin to pass through. After curing and removal, it leaves a cohesive micro-bubble-free matte surface. Additionally, after removal, there is no need to sand the surface.
Kč144.07
Replacement snap-off blades LB-50BH

Replacement snap-off blades LB-50BH

eshop_010036/2
High-quality snap-off blades for the OLFA AL-LB cutting knife. The original packaging contains 10 pieces, so we recommend purchasing the entire package. It is also possible to buy them individually, but these are not packaged in the original packaging. The price is for 1 piece.
Kč21.23
Robuso scissors 1010/E/9

Robuso scissors 1010/E/9

eshop_010147
The total length of the scissors is 23.5 cm, the cutting length is 9.8 cm. Due to their handle shape, they are well-suited for cutting on a table. Completely nickel-plated. They are used for cutting lightweight fabrics.
Kč2,228.98
Robuso scissors 508/E/4.5

Robuso scissors 508/E/4.5

eshop_010152
The total length of the scissors is 11.8 cm, the cutting length is 2.8 cm. These scissors have a long handle. They are used for cutting paper, films, and for reproduction work. Angled blades.
Kč1,466.47
Rubber Vacuum Valve

Rubber Vacuum Valve

eshop_010164
Designed for vacuuming when using foil. Very easy to use. The inner diameter of the suction valve is 8 mm.
Kč104.54
Sleeve Protector (forearm sleeve)

Sleeve Protector (forearm sleeve)

eshop_010203/1
Ideal and inexpensive protection for your work clothes and arms against splashes and dust. The sleeve protector is 55 cm long and protects your sleeves from resin. Especially when laminating into deeper molds, the sleeve protector prevents unwanted contact with resin.
Kč27.09
Small cutting wheel 28 mm, complete

Small cutting wheel 28 mm, complete

eshop_010026/1
A great and time-tested tool for cutting fiberglass and carbon fabrics. Cuts up to 20 layers of fabric at once. You will achieve the longest blade durability and cutting efficiency on a linoleum mat.
Kč145.18
Spiral tubing 6 mm

Spiral tubing 6 mm

eshop_800018/10
Spiral tubing for resin distribution during vacuum infusion. Inner diameter 4mm outer 6mm.
Kč37.33
Two-part pins for molds 6/8 mm

Two-part pins for molds 6/8 mm

eshop_010141
a great tool for joining laminated parts that are still in the molds and the final adhesive seam must be as thin as possible. The pins are set during the mold production in the desired places on the parting line and secured against pull-out with thin glass fibers saturated with p
Kč29.50
Universal Polishing Paste 3M

Universal Polishing Paste 3M

eshop_010119
Proven paste for professional polishing of new and old molds and products. This paste has a wide range and can polish even relatively rough surfaces to a high gloss. It fully replaces the system where it is necessary to have several pastes graded according to roughness to achieve
Kč1,210.08
Vacuum butyl rubber adhesive and sealing compound - Terostat

Vacuum butyl rubber adhesive and sealing compound - Terostat

eshop_010001
Vacuum butyl rubber adhesive and sealing compound in the form of a mass. From this material, you can create any shape of sealing for your work during vacuuming. A similar material is also available in the form of strips for faster and more convenient application - you can also find it in our
Kč893.83
vacuum hose 6/8 mm

vacuum hose 6/8 mm

eshop_010117/5
Rigid vacuum hose with an outer diameter of 8 mm, inner diameter of 6 mm. Plastic connectors, coupling fittings, vacuum valve, and vacuum gauge can also be ordered.
Kč79.43
Vacuum Pump P 1 (R +G)

Vacuum Pump P 1 (R +G)

eshop_010149/1
P1 VACUUM PUMP\n\nThe product is manufactured in Germany, two-year warranty (excluding worn parts)\n\nDiaphragm vacuum pump and compressor. With integrated fine control valve and pressure gauge.\n\n\n\tHigh
Kč16,749.30
Vacuum Pump P 3 (R +G)

Vacuum Pump P 3 (R +G)

eshop_010150
P3 – VACUUM PUMP\n\nGerman product, two-year warranty (excluding consumable parts)\n\nThe pump is particularly suitable for evacuating larger areas, e.g. in aircraft construction.\n\nDiaphragm vacuum pump and compressor
Kč45,013.75
Vacuum Pump P2(R+G)

Vacuum Pump P2(R+G)

eshop_010149
P2 VACUUM PUMP\n\nGerman product, two-year warranty (excluding consumable parts)\n\nDiaphragm vacuum pump and compressor. With integrated fine control valve and vacuum gauge.\n\nSame ultimate vacuum
Kč34,469.31
vakuometr

vakuometr

eshop_010164/1
Vacuum valve from R&G, for measuring and monitoring pressure.\nMeasuring range from 0 - 1 bar.\nConnection: 1/4 (external thread)
Kč567.34
Wax Film 266 1.5 mm (305x610mm)

Wax Film 266 1.5 mm (305x610mm)

eshop_010052/1
Material used to define the future space between a double-sided mold that will be used for laminating. These films can be easily shaped into more complex forms and, compared to layers formed by laminating, guarantee a constant thickness as well.
Kč990.46
Wax Film 266 2 mm (305x610 mm)

Wax Film 266 2 mm (305x610 mm)

eshop_010052/8
Material used to define the future space between a double-sided mold that will be used for laminating composites. These films can be easily shaped into more complex forms and, compared to layers formed by laminating, guarantee a constant thickness as well.
Kč1,177.14
Wax Film 266 4 mm (305x610 mm)

Wax Film 266 4 mm (305x610 mm)

eshop_010052/7
Material used to define the future space between a double-sided mold that will be used for laminating composites. These films can be easily shaped into more complex forms and, compared to layers formed by laminating, guarantee a constant thickness as well.
Kč1,915.04
Waxed film 266 0.5 mm (305x610mm)

Waxed film 266 0.5 mm (305x610mm)

eshop_010052/2
Material used to define the future space between a double-sided mold that will be used for laminating. These films can be easily shaped into more complex forms and, compared to layers formed by laminating, guarantee a constant thickness as well.
Kč815.21
Waxed film 266 2.5 mm (305x610mm)

Waxed film 266 2.5 mm (305x610mm)

eshop_010052/3
Material used to define the future space between a double-sided mold that will be used for laminating. These films are easily shaped into more complex forms and, compared to layers formed by laminating, guarantee a constant thickness even in r
Kč1,188.12
Waxed film 266 3 mm (305x610mm)

Waxed film 266 3 mm (305x610mm)

eshop_010052/4
Material used to define the future space between a double-sided mold that will be used for laminating. These films shape well even into more complex shapes and, compared to layers formed by laminating, guarantee a constant thickness as well.
Kč1,471.42
Waxed film 266 1 mm (305x610mm)

Waxed film 266 1 mm (305x610mm)

eshop_010052/5
Material used to define the future space between a double-sided mold that will be used for laminating. These films are easily shaped into more complex forms and, compared to layers formed by laminating, guarantee a constant thickness even in r
Kč917.99
Yellow Filling Wax - Plasticine - pack. 650g

Yellow Filling Wax - Plasticine - pack. 650g

eshop_010256/7
Filling wax - plasticine is a material suitable for minor repairs and adjustments of molds and models. With this material, you can easily and quickly repair chipped edges of molds or very perfectly seal gaps in the separating planes of multi-part molds.\n\nThe advantage is very
Kč475.83
Zapant Brush No. 2 (wooden handle)

Zapant Brush No. 2 (wooden handle)

eshop_229102
Brush with a wooden handle width 13 mm. The total length of the brush is 180 mm. The thickness of the brush is 3 mm and the length of the bristles is 20 mm.
Kč26.65
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text