Home

Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
CARBON, GLASS AND ARAMID ROWINGS
CARBON, GLASS AND ARAMID ROWINGS
FABRICS
FABRICS
TAPES AND BRAIDS
TAPES AND BRAIDS
PRE-PREGs
PRE-PREGs
NON-WOVEN FABRICS, FIBERGLASS MATS, FLEECE
NON-WOVEN FABRICS, FIBERGLASS MATS, FLEECE
SANDWICH MATERIALS
SANDWICH MATERIALS
Polyurethane foams
Polyurethane foams
SILICONES
SILICONES
RELEASE AGENTS AND FILLERS
RELEASE AGENTS AND FILLERS
Pigments for colouring
Pigments for colouring
Putties, Thinners
Putties, Thinners
AUXILIARY MATERIALS AND ACCESSORIES
AUXILIARY MATERIALS AND ACCESSORIES
Others
Others
Materials by Technology
Materials by Technology
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
3-piece pins for molds 5/8 mm (1 pack 3 pcs)

3-piece pins for molds 5/8 mm (1 pack 3 pcs)

eshop_010141/1
Metal pins for precise positioning of multi-part molds. The advantage of these pins is that they can be removed from the metal insert in the parting line at any time and do not interfere during separation. Suitable in combination with bushings for mold clamping with screws.
Kč141.87
3M 7500 Half Mask Size L

3M 7500 Half Mask Size L

eshop_010093/B
Proven and high-quality half mask that effectively protects you from hazardous organic vapor emissions. These vapors are released from most resins and paints used not only in the production of laminates, and therefore by using this half mask with the prescribed filters you can ch
Kč1,745.35
5 Minute Epoxy Adhesive Component A

5 Minute Epoxy Adhesive Component A

eshop_001041
Professional resin primarily for bonding not only composite parts. Very suitable for manufacturing operations where it is necessary to quickly bond or fix individual parts before the actual laminating. A popular helper for more complex and demanding repairs of damage
Kč595.89
Accelerator D

Accelerator D

eshop_000004/j
Designed for Havelpol 12 resin. Recommended dosage 0.5 - 1 g of accelerator per 100 g of resin.
Kč295.17
Acralock SA 10-05 BLK 50ml , 10:1

Acralock SA 10-05 BLK 50ml , 10:1

eshop_001099/24
advanced two-component methacrylate adhesives designed for the chemical bonding of most surfaces, creating strong joints and integrated assemblies from steel, aluminum, engineering plastics, modern composites, and other materials. Packaged directly in an application cartridge
Kč555.63
Activated Carbon MAC6D40

Activated Carbon MAC6D40

eshop_010118
Activated carbon is used as a filler for filters for air and water filtration. This material will ensure the filtration of contaminated air from your laminating or painting shop when used correctly.
Kč216.69
Adhesive Spray Infutac - 500 ml - clear

Adhesive Spray Infutac - 500 ml - clear

eshop_900237/1
Contact adhesive spray for temporary bonding of fabrics before saturation.\n\nINFUTAC is designed for the installation of dry reinforcements, etc. in vacuum, infusion, and RTM processes.\n\nBonding of hybrid materials\nOptimal adhesion during curing
Kč571.00
Adhesive spray Infutac - 500 ml - green

Adhesive spray Infutac - 500 ml - green

eshop_900237
Contact adhesive spray for temporary attachment of fabrics before impregnation.\n\nINFUTAC is designed for the installation of dry reinforcements, etc. in vacuum, infusion, and RTM processes.\n\nAttachment of hybrid materials\nOptimal adhesion during shaping
Kč614.92
Battery scissors - E.C.CUTTER 2965.011.000

Battery scissors - E.C.CUTTER 2965.011.000

eshop_010177/1
Electric scissors suitable for cutting fabrics, paper, films, and other materials. These scissors can easily handle aramid fabric. Easy and precise work. The delivery of the scissors includes the scissors with a battery and a universal cutting attachment. Furthermore, it is in the edge
Kč6,368.84
Bubble Wrap BULPACK

Bubble Wrap BULPACK

eshop_003007/2A
Bubble wrap is especially suitable for packaging your products. It protects your products primarily from impact.
Kč13.54
Carbon Fiber Rod 4x1000 mm.

Carbon Fiber Rod 4x1000 mm.

eshop_010121/4
Carbon rod with a diameter of 4 mm. It is made from carbon fibers and high-quality epoxy resin using pultrusion. (the technology of continuous pulling of saturated carbon fibers through an exact metal mold that is heated) For larger quantities, it is possible
Kč300.14
View
Carbon fiber rod diameter 3 mm, length 1000 mm

Carbon fiber rod diameter 3 mm, length 1000 mm

eshop_010211/10
Carbon fiber rod diameter 3 mm. It is made from carbon fibers and high-quality epoxy resin using pultrusion. (the technology of continuous drawing of saturated carbon fibers through an exact metal mold that is heated) For larger quantities, it is possible
Kč240.11
View
carbon tubes 10x8x1000 mm

carbon tubes 10x8x1000 mm

eshop_010169/2
Carbon tubes made by pultrusion ensure relatively precise dimensions with small tolerance. They have a smooth surface both outside and inside.\nPultrusion is a technology in which pre-impregnated carbon or glass fibers are drawn through a heated metal mold and are
Kč567.70
carbon tubes 6x4x1000 mm

carbon tubes 6x4x1000 mm

eshop_010130/3a
Carbon tubes manufactured by pultrusion ensure relatively precise dimensions with a small tolerance. They have a smooth surface both outside and inside. Pultrusion is a technology in which pre-impregnated carbon or glass fibers are drawn through a heated metal mold and js
Kč585.27
Clamp Valve for Infusions

Clamp Valve for Infusions

eshop_900920
Screw valve for tightening input and output hoses, especially in vacuum infusion techniques for composite manufacturing. The valve is made of metal components and excels in durability and reusability. With proper handling, there is no contamination.
Kč1,225.45
Clear Epoxy Gelcoat EG 100-T - for thin layers

Clear Epoxy Gelcoat EG 100-T - for thin layers

eshop_001045
This epoxy gelcoat can be applied solely by spraying. It can also be applied as a brush coating. The secret to smooth surfaces. It creates a smooth visible layer depending on the surface of the mold. The surface does not require any further treatment after being removed from the mold.
Kč1,142.00
Clear Polyester Gelcoat GS 100 S - Norpol GS Base - S

Clear Polyester Gelcoat GS 100 S - Norpol GS Base - S

eshop_000015
The secret of smooth surfaces. Creates a smooth visible layer depending on the surface of the mold. The surface requires no further treatment after removal from the mold. You create the surface directly in the mold. Financial and effective savings. Pigments can be used for coloring
Kč363.83
Cobalt Accelerator for Curing Polyester and Vinyl Ester...

Cobalt Accelerator for Curing Polyester and Vinyl Ester Resins 1 %

eshop_000026
Accelerates the curing process. Some resins are not pre-accelerated for various reasons. This accelerator allows you to accelerate them just before processing. The standard addition of the accelerator is 0.5-3% of the weight of the resin used. WARNING DO NOT MIX ACCELERATOR WITH CATALYST
Kč531.47
Compressed Sponge

Compressed Sponge

eshop_010324
An excellent helper for underwater sanding. Very absorbent sponge gentle on surfaces. Delivered in a compressed state and expands after soaking in water.
Kč104.68
Crystic U 1131 T (ortho) self-extinguishing polyester...

Crystic U 1131 T (ortho) self-extinguishing polyester resin for DIN 5510

eshop_900581
CRYSTIC U 1131 T is a filled, orthophthalic, non-accelerated thixotropic unsaturated polyester resin with low styrene content. It is suitable for fire-resistant/self-extinguishing laminates with reduced smoke generation. CRYSTIC U 1131 T is halogen-free and does not contain heavy
Kč140.55
Device for distilling contaminated acetone and other...

Device for distilling contaminated acetone and other solvents 20L

eshop_900606
Small and handy device for distilling contaminated solvents with a capacity of 20L, consumption 1.2Kw/h, stainless steel design ATEX. Maintenance-free device with a payback period of 5-7 months. Devices for 50, 150, and 500 liters are also available. Delivery on order 10-14 days. Goods
Kč319,788.72
Distribution mesh OM 70 - 180g/m2 w.650mm - green

Distribution mesh OM 70 - 180g/m2 w.650mm - green

eshop_900282
Distribution mesh with high porosity allowing good airflow and resin flow, OM70 is recommended for vacuum or infusion technologies with polyester or epoxy.\n\nAvailable in INFUPLEX version (combined with perforated film) for easier
Kč113.32
Epodur 619-0600 component B

Epodur 619-0600 component B

eshop_001069
Colorless hardener, suitable for casting systems or laminating with a longer processing time: approx. 4 hours.\n\nRiver table. Mixing ratio epoxy:hardener=100:40 by weight. Maximum layer 2cm. Subsequent curing required min. 50°C for 3 hours!
Kč975.09
Eporezit - T600 (slower hardener)

Eporezit - T600 (slower hardener)

eshop_610032
Characteristics: it is a liquid hardener for casting epoxy resins. solvent-free Not\ntoxic. It is a modified aliphatic polyamide with low exothermic reaction and long\nprocessing time, characterized by low viscosity. T-600
Kč1,223.99
Epoxidová pryskyřice L 285 (MGS)

Epoxidová pryskyřice L 285 (MGS)

eshop_001007
Very high-quality resin for the aerospace industry and for model making. The resin with hardener creates a very viscous mixture, allowing the fibers to be quickly and thoroughly impregnated. As a result, the product has significantly lower weight and higher utility value. More details
Kč945.81
Epoxy gelcoat 7060 clear

Epoxy gelcoat 7060 clear

eshop_900882
UV stabilized transparent epoxy gelcoat for the visible layer of carbon parts, more information in TL and BL:
Kč1,541.70
Epoxy Gelcoat for Mold Production Araldit SW 404

Epoxy Gelcoat for Mold Production Araldit SW 404

eshop_001052
Top-quality gelcoat for mold production. Blue in color, it is known for its unmatched durability and time-tested quality. The only disadvantage is that it cannot be polished. Chemically resistant. For curing, use hardener Araldit HY 2404 in a ratio of 100:10. Curing time
Kč1,188.85
Epoxy Gelcoat P for Mold Production, Black

Epoxy Gelcoat P for Mold Production, Black

eshop_001061
Creates a solid surface and edges of molds, is polishable and has a black color. After mixing, we recommend vacuuming in a prepared bell to remove microbubbles formed during mixing. Recommended hardeners EPH 161 (VE 3261) and EPH 573 (VE 2723). The coverage is 0.5-1 kg/m2
Kč1,256.20
Epoxy gelcoat white spray EG 100-W - for thin layers

Epoxy gelcoat white spray EG 100-W - for thin layers

eshop_001044
A solution of medium molecular weight epoxy resin in a mixture of organic solvents with the addition of additives, white shade RAL 9003. This epoxy gelcoat can be applied solely by spraying. It can also be applied as a brush coating. The secret of smooth p
Kč1,054.15
Epoxy Resin 324 ( 371 1200 )

Epoxy Resin 324 ( 371 1200 )

eshop_001037/1
Relatively inexpensive and proven resin CHS EPOXY 1200 for various applications. Characterized by high density, it is most commonly used for bonding, has good adhesion to most materials. Very tough resin. It is mixed with hardener P 11 in a ratio of 100:7 processing time
Kč398.60
Epoxy Resin 455 (formerly 512, 1505)

Epoxy Resin 455 (formerly 512, 1505)

eshop_001038
Relatively inexpensive epoxy resin suitable for the production of molds or parts where the minimum wall thickness is 1mm or more. After curing, it usually has a milky color. It is mixed with hardener P 11 in a ratio of 100:10 with a working time of 100g/20°C 15-20 min. Or with hardeners
Kč514.63
Epoxy Resin C

Epoxy Resin C

eshop_001029
Chemically resistant epoxy resin. Used in the construction of tanks, cisterns, and pipelines. Due to its parameters, it is suitable and often used in the production of fiberglass fuel tanks. The resin is quite thick, so it is advisable to preheat it before impregnating the fibers.
Kč622.97
Epoxy Resin L

Epoxy Resin L

eshop_001025
Epoxy resin suitable for impregnating glass, aramid, and carbon fibers and fabrics. With recommended hardeners, it creates a laminating system that has good adhesion to wood, steel materials, polystyrene, and other similar materials. Recommended t
Kč840.39
Epoxy Resin L 20

Epoxy Resin L 20

eshop_001027
Resin L 20 is a laminating resin suitable for most processes for laminating primarily in the aerospace industry. Epoxy resin for saturating glass, aramid, and carbon fibers. It bonds wood, metals, styrofoam, etc. It is suitable for manual lamination.
Kč1,048.73
Epoxy Resin LH 1000

Epoxy Resin LH 1000

eshop_111068
Denser epoxy resin suitable for bonding, casting, pouring, and when heated to 35°C and above also suitable for laminating and injection into warm molds, production of polymer concrete and adhesives. Hardener 133-138 (MGS) can be used in the mixing ratio of resin:hardener
Kč447.28
Epoxy Resin LH 130

Epoxy Resin LH 130

eshop_111039
Standard resin of medium viscosity based on bisphenol A with reduced crystallization ability. For curing at room temperature from 10-30°C. Used for boat building, sports equipment, model aircraft, molds, tools, adhesives, and castings. Viscosity
Kč522.68
Epoxy Resin LH 145

Epoxy Resin LH 145

eshop_111026
Epoxy resin suitable for the production of sports equipment, boats, and automotive parts. It is particularly suitable for manufacturing using glass, carbon, and aramid fibers. Hardener 133-138 (MGS) can be used in a mixing ratio of resin:hardener 100:35 by weight or harden
Kč450.21
Epoxy Resin LH 160 /HAVEL/

Epoxy Resin LH 160 /HAVEL/

eshop_111020
This is a laminating resin with medium viscosity that does not contain solvents or fillers, intended for processing and curing at room temperature. Suitable for the production of parts reinforced with glass, carbon, and aramid fibers, its features are
Kč505.11
Epoxy Resin LH 206C

Epoxy Resin LH 206C

eshop_111225
Epoxy resin LH 206C is characterized by low viscosity. It is suitable for casting. It is a modified resin. It can be used as a base for preparing fillers. In combination with hardener T 600 and hardener H 206C, castings 10 to 15 mm thick can be obtained
Kč714.48
Epoxy Resin LH 210

Epoxy Resin LH 210

eshop_111071
The epoxy system LH 210/H 10 has been developed based on your requirements for a clear and UV stable product. The system exhibits extreme clarity and minimal shrinkage. Additionally, it is very environmentally friendly and safe for your health, as it does not
Kč472.17
Epoxy Resin LH 230

Epoxy Resin LH 230

eshop_111215
Epoxy resin LH 230 is characterized by low viscosity. When cured with amines or polyamines, it offers high-quality application properties such as high mechanical properties, good chemical resistance, good thermal properties, etc. Laminating system p
Kč510.60
Epoxy Resin LH 260

Epoxy Resin LH 260

eshop_111001
Epoxy resin LH 260 for increased temperature resistance. For curing, it is advisable to use hardeners 285, 286, 287 all in a ratio of 100:40 (by weight). Also newly an excellent hardener H 146 100:30/(by weight). The product after initial curing is still gradually thermally d
Kč658.85
Epoxy Resin LH 260 with UV Stabilizer - Black

Epoxy Resin LH 260 with UV Stabilizer - Black

eshop_112217
Low-viscosity resin based on epoxy resin. The micro-particles contained in the epoxy resin give the resulting composite a black color and improve its strength under static and dynamic loading (modulus of elasticity, tensile strength, and flexural strength)
Kč515.36
Epoxy Resin LH 287

Epoxy Resin LH 287

eshop_112219
Epoxy resin LH 287 is characterized by extremely low viscosity, comparable\nto resin 285. When cured with amines or polyamines, it offers high-quality application\nproperties such as high mechanical properties and good chemical resistance
Kč571.00
Epoxy Resin LH 288

Epoxy Resin LH 288

eshop_111211
Epoxy resin LH 288 is characterized by extremely low viscosity. When curing with amines or polyamines, it offers high-quality application properties such as high mechanical properties, good chemical resistance, excellent thermal properties, etc. It is
Kč533.30
Epoxy Resin LH 289

Epoxy Resin LH 289

eshop_112220
Epoxy resin LH 289 is characterized by extremely low viscosity. During curing, it offers high-quality application properties such as optimal mechanical properties, good chemical resistance, excellent thermal properties, etc. It is suitable for the production of comp
Kč505.11
Epoxy Resin LH 300

Epoxy Resin LH 300

eshop_111027
Very high-quality, medium-viscosity low-molecular resin for laminating parts with high resistance (up to 160°C). Must be cured at 90°C for a minimum of 3 hours. It is mixed with hardener H 300 (10:25) for temperature resistance up to 120°C or with hardener H 512 (
Kč727.66
Epoxy Resin LH 301

Epoxy Resin LH 301

eshop_112216
Epoxy resin LH 301 is a resin that allows achieving temperature resistance of around 160°C with the appropriately selected hardener H 513. When curing with amines or polyamines, it offers high-quality application properties such as high mechanical properties, good ch
Kč625.17
Epoxy Resin LH 330

Epoxy Resin LH 330

eshop_111057
Flexible epoxy resin suitable for curing at room temperature. The appropriate hardener is H 330, mixing ratio 100:40 by weight or 100:50 by volume. Gel time at 25 degrees Celsius is 70 min. Thermal resistance 50 degrees Celsius. Viscosity of the mixture at 25 degrees
Kč481.69
Epoxy Resin LH 385

Epoxy Resin LH 385

eshop_111242
Epoxy resin LH 385 is characterized by low viscosity. The cured product is slightly flexible.\n\nWhen cured with amines or polyamines, it offers high-quality application properties such as high mechanical properties,\ngood chemical resistance,
Kč505.11
Epoxy Resin RIVERTABLE WWA

Epoxy Resin RIVERTABLE WWA

eshop_000034
Pouring epoxy resin designed primarily for creating casts with a thickness of 0-9cm. For example, pouring wooden table slabs into so-called Rivertables, etc.\n\nExcellent UV stability, clarity, colorless with the possibility of tinting using dyes and pigments, curing
Kč590.03
Epoxy Resin Surface Araldite SW 419-1

Epoxy Resin Surface Araldite SW 419-1

eshop_001074
Areas of use . tools for sheet forming . general mold production Processing methods Application using a brush or spatula Characteristic features . well spreadable . does not run . minimal sedimentation For curing, it is necessary to mix Hardener HV 2419 in
Kč951.67
Filament 160 - polypropylene tape 20 mm, 160°C (roll 1000m)

Filament 160 - polypropylene tape 20 mm, 160°C (roll 1000m)

eshop_900331
Thin polypropylene tape designed not only for the production of tubes and other profiles (binding materials to the mandrel), but also for repairs. Even though the tape is very thin, it can exert a great pressure on the product and thus squeeze out excess resin. We supply it in width
Kč889.44
Filler Clay - Putty (EXTRA SOFT)

Filler Clay - Putty (EXTRA SOFT)

eshop_010256/9
Filler clay - putty is a material suitable for minor repairs and adjustments of molds and models. With this material, you can easily and quickly repair chipped edges of molds or perfectly fill gaps in the separating planes of multi-part molds. This material is thermally in
Kč244.80
Filling Clay - Putty

Filling Clay - Putty

eshop_010256
Filling clay - putty is a material suitable for minor repairs and adjustments of molds and models. With this material, you can easily and quickly repair chipped edges of molds or very perfectly seal gaps in the separating planes of multi-part molds. This material is thermally in
Kč801.59
Filter holder for 3M 501, 7500 chemical mask

Filter holder for 3M 501, 7500 chemical mask

eshop_010096
Plastic holders 501 for half mask 7500 are a necessary accessory for securing dust filters P2 to the basic carbon filters 6055A2 used with the chemical half mask.
Kč205.22
Filters for 3M 6055A2 chemical mask - chemical

Filters for 3M 6055A2 chemical mask - chemical

eshop_010094
Chemical filters A2 are very effective and reliably filter organic vapors, protecting you from inhalation. Think about your health before it's too late! For maximum filter lifespan, we recommend using dust pre-filters, which protect you and chemicals
Kč689.01
FLO-KING Plastic Drum Tap - Large

FLO-KING Plastic Drum Tap - Large

eshop_010165/1
The polyethylene drain tap is suitable for draining larger quantities of materials from metal drums with a corresponding opening. In our offer, you will also find a smaller drain tap that is suitable for draining smaller quantities of material.
Kč1,125.16
FLO-RITE Plastic Drum Tap - Small

FLO-RITE Plastic Drum Tap - Small

eshop_010165/2
The polyethylene drain tap (small) is suitable for draining smaller quantities of materials from metal drums with the appropriate opening. In our offer, you will also find a larger drain tap that is suitable for draining larger quantities of material.
Kč137.99
Hardener 133 (MGS)

Hardener 133 (MGS)

eshop_001017
Hardener for curing epoxy resin L 135, L 160, L, LR, LR 10O, LH 1000, LH 130, LH 160, LH 175, LH 145 Mixing ratio is 100:35/by weight/ or 100:40/by volume/. Pot life for 100g/20 C is 10-15 min. Minimum order quantity is 25kg!
Kč933.36
Hardener 134 (MGS)

Hardener 134 (MGS)

eshop_001018
Hardener for curing epoxy resin L 135, L 160, L, LR, LR 100, LH 160\nMixing ratio is 100:35 /by weight/ or 100:40 /by volume/, working time 100g / 20 C 20 min.\nFor more detailed processing instructions see tech. data sheets MGS.\nAdditional necessary info
Kč819.90
View
Hardener 135 (MGS)

Hardener 135 (MGS)

eshop_001008/1
Hardener for curing epoxy resin L 135, L 160, L, LR, LR, LR 100, LH 160. The mixing ratio is 100:35/by weight/ or 100:40/by volume/. Processing time for 100g /20 C is 25-30 min. Further necessary information can be obtained at http://www.momentive.com/
Kč819.90
Hardener 136 (MGS)

Hardener 136 (MGS)

eshop_001019
Hardener for curing epoxy resin L 135, L 160, L, LR, LR, LR 100, LH 160. The mixing ratio is 100:35/by weight/ or 100:40/by volume/. Processing time for 100g /20 C is 1 - 2 hours. Further necessary information can be obtained at http://www.momentive.com/
Kč948.74
Hardener 285 (MGS)

Hardener 285 (MGS)

eshop_001009
Hardener for curing epoxy resin 285. The mixing ratio is 100:40 /by weight/ 100:50 /by volume/ Processing time 100g / 20 C 50 minutes. For more detailed processing instructions see the technical data sheets MGS. Additional necessary information can be obtained at http://www.moment
Kč1,172.74
Hardener 286 (MGS)

Hardener 286 (MGS)

eshop_001010
Hardener for curing epoxy resin 285. The mixing ratio is 100:40 /by weight/ 100:50 /by volume/ Working time 100g / 20 C 2 h. For more detailed processing instructions see the tech. sheets MGS. Further necessary information can be obtained at http://www.momentive.c
Kč1,156.27
Hardener 287 (MGS)

Hardener 287 (MGS)

eshop_001011
Hardener for curing epoxy resin 285. The mixing ratio is 100:40 /by weight/ 100:50 /by volume/ Processing time 100g / 20 C 4 h. For more detailed processing instructions see the technical data sheets MGS. Further necessary information can be obtained at http://www.momentive.c
Kč1,583.95
Hardener C

Hardener C

eshop_001030
Hardener for curing epoxy resin C. Mixing ratio resin:hardener= 100:60 (by weight). Processing time: 50 min. Details can be found in the R+G Handbook p.77/78
Kč812.58
Hardener H 10

Hardener H 10

eshop_111070
Hardener H 10 is used for curing epoxy systems with increased UV stability* primarily for casting, laminating, coating, and adhesive epoxy systems. Processing can take place at a minimum of 10°C. The advantages of the products are excellent smoothness and good surface
Kč566.61
Hardener H 100 for epoxy spray gelcoat EG 100-W and EG 100-T

Hardener H 100 for epoxy spray gelcoat EG 100-W and EG 100-T

eshop_001046
Hardener for epoxy gelcoats. Mixing for EG 100 T: H100= 100:40 and for EG 100 W:H100= 100:26 by weight. Mix the gelcoat and hardener in the prescribed ratio and stir thoroughly. Only then can it be diluted if necessary. Do not load until the coating is fully cured.
Kč1,200.56
Hardener H 10A

Hardener H 10A

eshop_111224
Hardener H 10A is a hardener as a replacement for H10. This hardener is particularly suitable for applications where the requirement is for the clearest possible laminating system. For example, for visible layers made in the first layer from glass fabric with an aluminum surface or in case
Kč659.58
Hardener H 10B

Hardener H 10B

eshop_111227
Hardener in combination with LH 160 and LH 210, ratio 100 to 47. Suitable for encapsulating self-adhesive labels. In a layer of 1-2mm, it provides a bubble-free surface. The surface stops being sticky after about 16-24 hours. Provides a clear, more flexible composite.
Kč581.98
Hardener H 145 (HAVEL)

Hardener H 145 (HAVEL)

eshop_111032
Mixing ratio 100:33, working time 50 min. Must be tempered to at least 50°C
Kč579.78
Hardener H 146

Hardener H 146

eshop_111198
High-quality hardener for curing epoxy resins. The mixing ratio with LH 160, LH 145, and LH 130 is 100:30 by weight, with a processing time of 50-60 min. The minimum curing temperature is 25 °C, but 30 °C and above is recommended.
Kč512.44
Hardener H 147 (HAVEL)

Hardener H 147 (HAVEL)

eshop_111030
Top-quality hardener for epoxy resin LH 160 recommended for the production of certified parts not only in aviation. Mixing ratio 100:25, slow hardener with a working time of 90 min. To achieve the parameters for which this hardener is recommended, it is necessary to tem
Kč566.61
Hardener H 206C

Hardener H 206C

eshop_111226
Hardener H 206C is a hardener for casting epoxy resins. It is suitable for preparing clear composites for all types of laminations at temperatures above 15°C. The cured resin is not brittle and does not require conditioning, although higher thermal resistance of the cured resin can be achieved.
Kč722.53
Hardener H 25

Hardener H 25

eshop_111067
Hardener H 25 was developed as a replacement for P 11. Unlike hardener P 11, no harmful vapors are released during processing, and additionally, the cured epoxy exhibits significantly higher strengths. The hardener is suitable not only as a replacement in epoxy resins from Spolchemi
Kč629.30
Hardener H 282

Hardener H 282

eshop_112219/1
Cured polyvinyl chloride foam for the production of sandwich structures with higher thermal resistance. Panel size: 2150x1000 mm. Suitable for laminating and bonding with polyester, vinylester, or epoxy. PVC foam coated with glass, aramid, carbon or
Kč433.37
View
Hardener H 285 HAVEL

Hardener H 285 HAVEL

eshop_111260/1
The laminating resin and hardener system was developed as a direct replacement for the well-known LR 285 system from MGS (Hexion). It is suitable for the production of composites using glass, carbon, and aramid fibers and is characterized by high static and dynamic properties.
Kč737.91
Hardener H 286 HAVEL

Hardener H 286 HAVEL

eshop_111091
The laminating resin and hardener system was developed as a direct replacement for the well-known LR 285 system from MGS (Hexion). It is suitable for the production of composites using glass, carbon, and aramid fibers and is characterized by high static and dynamic properties.
Kč702.77
Hardener H 287 HAVEL

Hardener H 287 HAVEL

eshop_111260
The laminating resin and hardener system was developed as a direct replacement for the well-known LR 285 system from MGS (Hexion). It is suitable for the production of composites using glass, carbon, and aramid fibers and is characterized by high static and dynamic properties.
Kč1,057.08
Hardener H 289

Hardener H 289

eshop_111118/2
Characteristics: it is a liquid hardener for epoxy resins. The hardener is based on cycloaliphatic polyamine. Physical parameters: Viscosity at 25°C 7 - 11 m Pa.s. Hydrogen equivalent 59 g Density at 20 °C 930- 960 kg/m 3 Application: Hardener H 289 is
Kč742.30
Hardener H 300

Hardener H 300

eshop_111025
Fast hardener with reduced exotherm, high temperature resistance (approx. 90°C) and high flexibility. Used in HAVEL and MGS epoxy resins. We recommend tempering at a minimum of 50°C. Hardening ratio 100:25
Kč934.10
Hardener H 330

Hardener H 330

eshop_111059
H 330 is suitable for epoxy LH 330, mixing ratio epoxy:hardener = 100:40 by weight or 100:50 by volume. Gel time at 25 degrees Celsius is 70 min. Thermal resistance is 50 degrees Celsius. Viscosity of the mixture at 25 degrees Celsius is 450 mPas/s. The material was developed
Kč547.57
Hardener H 505

Hardener H 505

eshop_111118
Hardener H 505 is a hardener for epoxy resins. It is suitable for all types of laminations at temperatures above 15°C. Higher thermal resistance of the cured resin can be achieved by post-curing the system at an elevated temperature of 50-60 °C. It belongs to the so-called fast hardeners. Hard
Kč512.44
Hardener H 507

Hardener H 507

eshop_111206
Characteristics: it is a liquid hardener for epoxy resins. The hardener is based on cycloaliphatic polyamine and does not contain nonylphenol. Physical parameters: Viscosity at 25°C (m Pa.s.) 7 - 11 Hydrogen equivalent g/mol 50 Density at 20 °C kg/m 3 930-
Kč513.90
Hardener H 507 A

Hardener H 507 A

eshop_111206/1
Hardener H 507 A is suitable for all types of laminations at temperatures above 15°C. Higher thermal resistance of the cured resin can be achieved by post-curing the system at an elevated temperature of 50-60 °C. Working time is approximately 40 minutes. The low viscosity of the mixture ensures quick
Kč573.93
Hardener H 508

Hardener H 508

eshop_111205
Characteristics: it is a liquid hardener for epoxy resins. The hardener is based on cycloaliphatic polyamine, the main component is Isophorone diamine. It does not contain nonylphenol. Physical parameters: Viscosity at 25°C (m Pa.s) 7 - 11 Hydrogen equivalent (g/mol)
Kč540.25
Hardener H 509

Hardener H 509

eshop_111114
Hardener H 509 is a hardener for epoxy resins. It is suitable for all types of laminations at temperatures above 15°C. Higher thermal resistance of the cured resin can be achieved by post-curing the system at an elevated temperature of 50-60 °C. Working time is approximately 70-90 m
Kč600.28
Hardener H 512

Hardener H 512

eshop_111210
Hardener H 512 is a liquid low-viscosity hardener for epoxy resins. The hardener is based on cyclic diamine. It is suitable for all types of laminations at temperatures above 15°C and where high thermal resistance is required. For proper curing, it is
Kč563.68
Hardener H 513

Hardener H 513

eshop_111213
Hardener H 513 (Previously H 284) is a hardener for epoxy resins. It is suitable for all types of laminations at temperatures above 15°C and where high thermal resistance is required. Higher thermal resistance of the cured resin can be achieved by post-curing sys
Kč538.06
Hardener H 514

Hardener H 514

eshop_111245
Hardener H 514 is a liquid low-viscosity hardener for epoxy resins. The hardener is based on cyclic diamine. Hardener H 514 is a hardener for epoxy resins. The working time is in the range of 10-15 minutes. Ratio to resin LH 206AH : H 514
Kč623.41
Hardener H 533

Hardener H 533

eshop_112228
Hardener H 533 is a liquid mixed hardener containing hydroxylated amine for low molecular weight epoxy resins. Hardener H 533 is characterized by a short processing time of 10-15 min. Hardener H 533 is a hardener for epoxy resins. It is suitable for all
Kč566.61
Hardener H 534

Hardener H 534

eshop_112229/1
Hardener H 534 is a liquid mixed hardener containing hydroxylated amine for low molecular weight epoxy resins. Hardener H 534 is characterized by a short processing time of 15-25 min. It is suitable for all types of laminations at temperatures above 15°C. Processing time
Kč440.69
Hardener H 535

Hardener H 535

eshop_111218
Hardener H 535 is a liquid mixed hardener containing hydroxylated amine for low molecular weight epoxy resins. Hardener H 535 is characterized by a short processing time of 25-30 min. Hardener H 535 is a hardener for epoxy resins. It is suitable for all
Kč566.61
Hardener H 536

Hardener H 536

eshop_111219
Characteristics: Hardener H 536 is a liquid mixed hardener containing hydroxylated amine for low molecular weight epoxy resins. Hardener H 536 is characterized by a longer processing time of 60-80 min. It is suitable for all types of laminations at temperatures
Kč661.04
Hardener H 538

Hardener H 538

eshop_111243
Hardener H 538 is a hardener for epoxy resins. It is suitable for\nmost laminations at temperatures above 15°C. Working time is 60-80\nmin. The product is not brittle. The composite is recommended to be\ntempered at 50°C for 3 – 5 hours. Higher temperatures
Kč801.16
Hardener HV 2419

Hardener HV 2419

eshop_001075
Hardener designed for epoxy gelcoat Araldite SW 419-1\nMixing ratio 100:13 /by weight/
Kč1,839.79
Hardener HY 2404

Hardener HY 2404

eshop_001053
Hardener for curing epoxy gelcoat Araldit SW 404 Mixing ratio 100:10 /by weight/ working time 25-30 min.
Kč1,672.59
Hardener L

Hardener L

eshop_001026
Hardener for curing resin L and EP gelcoats /R&G/, mixing ratio 100:40 (by weight), processing time 40 min.
Kč989.00
Hardener REN HY 5159 for RENGEL SW 56

Hardener REN HY 5159 for RENGEL SW 56

eshop_001123/2
Hardener for the molding gelcoat SW 56. Recommended dosage of hardener HY 5159 in the ratio epoxy:hardener= 100:10 (by weight). After gradual tempering, heat-resistant up to 120°C, the processing time at 25°C and 250ml is 25-30 min.
Kč2,459.69
Hardener VE 3261 (now EPH 161)

Hardener VE 3261 (now EPH 161)

eshop_001076
Hardener for curing epoxy resin L 20 (100:25 by weight) or Gelcoat P (100:17 by weight). Working time: 90 min. It is necessary to follow the curing instructions: 24 h at room temperature followed by post-curing for 15 h at 60 degrees
Kč975.09
Havel Adhesive G 40 sl. B 30

Havel Adhesive G 40 sl. B 30

eshop_111121
Havel Adhesive G 40 component A5 + B30 (epoxy adhesive) is an epoxy system based on a mixture of epoxy resin and reactive thinner, cured with a mixed modified hardener.\nAppearance of components A5 light gray, B30 yellow\nUsage:\nIt is recommended for
Kč1,019.89
Havel Adhesive G 40 sl.A 5

Havel Adhesive G 40 sl.A 5

eshop_111120
Structural adhesive for bonding laminated and wooden parts of materials such as Herex. It is also suitable for bonding parts made of polyester resin. The adhesive was developed especially for gluing parts that are not completely precise and require careful alignment during bonding.
Kč1,182.26
HAVELcell E1 component A

HAVELcell E1 component A

eshop_111101
The HAVELcell E1 epoxy foam is a structured epoxy resin with a specific gravity of approximately 550 kg/m3. Due to its low density, you can create a sandwich construction in your products. This material will save you time and reduce costs for your products. Part kt
Kč860.16
HAVELcell E1 component B

HAVELcell E1 component B

eshop_111102
HAVELcell E1 component B epoxy foam is a hardener for curing HAVELcell E1 component A epoxy foam in a ratio of 100:35 (by weight)
Kč1,169.82
HAVELcell P1 - Polyester Foam for Sandwich Production

HAVELcell P1 - Polyester Foam for Sandwich Production

eshop_111100
Reinforced white foam based on orthophthalic polyester resin. It has a viscosity similar to that of a sealant, is thixotropic, and does not run even at a layer thickness of 5 mm. The foam is suitable for creating sandwich structures directly in the mold. By using this foam, you can also significantly reduce
Kč349.19
Havelgelcoat 65 - polyester clear - brushable

Havelgelcoat 65 - polyester clear - brushable

eshop_000040/55
Havelgelcoat 65 is a pre-accelerated isophthalic gelcoat designed for application into molds. It is designed for brush application.\nIt is intended for use in the marine, construction, and transportation industries. It is also suitable for general use. It excels in durability
Kč541.72
Havelgelcoat 65 - polyester white - brushable

Havelgelcoat 65 - polyester white - brushable

eshop_000040/26
Havelgelcoat 65 is a pre-accelerated isophthalic gelcoat designed for application in molds. It is designed for brush application.\nIt is intended for use in the marine, construction, and transportation industries. It is also suitable for general use. It excels in durability
Kč511.85
Havelgelcoat 97 - polyester clear - brushable

Havelgelcoat 97 - polyester clear - brushable

eshop_000040/28
Havelgelcoat 97 is a pre-accelerated isophthalic gelcoat designed for application in molds. It has excellent adhesion to epoxy resins and pre-pregs. Suitable for brush application, Havelgelcoat 97 can be available in a wide range of colors. The processing technique is at one
Kč497.79
HAVELinhibit 1

HAVELinhibit 1

eshop_100022
Material suitable for extending gel-time. An excellent aid in the production of large or complex products made from polyester and vinylester resins, especially during the summer months. Recommended dosage 0.1 - 0.6% (by weight)
Kč857.60
HAVELPOL - 2 - white 2%

HAVELPOL - 2 - white 2%

eshop_111195
HAVELpol 2 - white RAL 9010 polyester resin. It is a pre-accelerated polyester resin developed for hand lamination or spraying. It is suitable for the production of products where coloring is required - bathtubs and other sanitary products. For curing
Kč360.17
HAVELPOL - 4

HAVELPOL - 4

eshop_000040/5
HAVELpol 4 is a clear yellowish unaccelerated polyester resin. To cure, it is necessary to mix in two additional components: Accelerator-cobalt and Catalyst-peroxide. The resin is suitable for manual lamination of transparent parts with high resistance and requirements
Kč354.31
HAVELPOL - 5 CLEAR non-accelerated!

HAVELPOL - 5 CLEAR non-accelerated!

eshop_000040/6
HAVELpol 5 polyester resin is suitable for the production of strength-demanding parts that must withstand greater loads. Note that the resin is not pre-accelerated - A CATALYST AND ACCELERATOR ARE REQUIRED FOR CURING! To cure, add the Peroxi catalyst
Kč316.25
HAVELPOL -1

HAVELPOL -1

eshop_000040/2
Basic orthophthalic resin, pre-accelerated, thixotropic and simultaneously low-emission. It is suitable for products that do not require high strength. For lamination, basic peroxides such as Butanox M 50 or peroxide K 1 are suitable. Basic mixing ratio 100:1-2 (note it is not a sou
Kč209.37
HAVELPOL -2 - new formulation

HAVELPOL -2 - new formulation

eshop_000040/3
Standard orthophthalic polyester resin HAVELpol 2. It is a pre-accelerated polyester resin developed for hand lamination or spraying. For curing, add peroxide K1 or Butanox M50 in a ratio of 100:1-3 by weight. Pot Life at 1% Butanox
Kč346.99
High-Temperature Epoxy Resin Araldit SW 18

High-Temperature Epoxy Resin Araldit SW 18

eshop_001052/2
Green polishable epoxy gelcoat for mold making for hand lamination, vacuum infusion, and RTM, also suitable for the production of polyester parts (gelcoat resistant to styrene). For curing, use hardener Araldit HY 5159 in a weight ratio of 100:16.
Kč1,603.19
Holder 5-7mm, d. 19cm

Holder 5-7mm, d. 19cm

eshop_483010
Solvent resistant. Suitable for shorter rollers with an internal diameter of 6 mm. Length 20 cm.
Kč25.48
holder 6mm, d. 39cm/6mm

holder 6mm, d. 39cm/6mm

eshop_161010
Solvent resistant. Suitable for shorter rollers with an inner diameter of 6 mm. Length 42 cm.
Kč40.34
ISPOFLEX 50 gray 310 ml - replacement for Emfimastic

ISPOFLEX 50 gray 310 ml - replacement for Emfimastic

eshop_900510
ISPOFLEX 50 is a single-component polyurethane elastomer sealant, curing by the action of moisture present in the air or in substrates to form a flexible and durable bond with high adhesion to various materials. AREAS OF USE ISPOFLEX 50 can be used for sealing
Kč199.85
Large Cutting Wheel 60 mm complete - OLFA - RTY - 3/G

Large Cutting Wheel 60 mm complete - OLFA - RTY - 3/G

eshop_010030
A great and time-tested tool for cutting fiberglass and carbon fabrics. Cuts up to 20 layers of fabric at once. The longest blade durability and cutting efficiency are achieved on a Linoleum mat.
Kč614.92
LH 260 with Defoamer

LH 260 with Defoamer

eshop_112218/1
General: Epoxy resin LH 260 with defoamer contains added substances based on a silicone-free defoamer suitable for all applications. The defoamer allows for faster removal of microbubbles from the future composite. Epoxy resin LH 260 is
Kč531.47
Maska proti prachu 3M 09322

Maska proti prachu 3M 09322

eshop_010180/1
Means of protecting the respiratory tract in a dusty environment. Temporarily out of stock - we are unlikely to obtain new ones during the epidemic
Kč211.05
Medium Cutting Wheel 45 mm, complete

Medium Cutting Wheel 45 mm, complete

eshop_010028/1
A great and time-tested tool for cutting fiberglass and carbon fabrics. Cuts up to 20 layers of fabric at once. The longest blade durability and cutting efficiency are achieved on a Linoleum mat.
Kč309.51
Modeling material for sculptural purposes (pack. 10 kg)

Modeling material for sculptural purposes (pack. 10 kg)

eshop_900195
Inexpensive modeling clay suitable for making models. Modeling material for sculptural purposes. Packaging 10 kg. The price is stated per unit!! The unit is kilogram, so the basic packaging has 10kg = 10 units.\n\nThe minimum order is 10kg. Sale in whole packs
Kč55.64
MTI-line membrane infusion hose (diameter 15/8mm)

MTI-line membrane infusion hose (diameter 15/8mm)

eshop_900871
MTI® stands for infusion using a membrane tube and describes a suction hose wrapped in a membrane for vacuum infusion.\nThe MTI® hose is an air-permeable and resin-blocking tube for evacuating air, allowing for easy use
Kč222.54
NOBBY - metal roller 25 x 150 mm

NOBBY - metal roller 25 x 150 mm

eshop_503334
A new type of roller that is suitable for releasing bubbles, especially in larger thicknesses of laminate. Due to the transverse and longitudinal grooving, it creates spikes and is therefore also suitable for laminates made of glass fabrics in larger thicknesses and weights.
Kč230.60
NOBBY - metal roller 25 x 75 mm

NOBBY - metal roller 25 x 75 mm

eshop_503332
A new type of roller that is suitable for releasing bubbles, especially in larger thicknesses of laminate. Due to the transverse and longitudinal grooving, it creates spikes and is therefore also suitable for laminates made of glass fabrics in larger thicknesses and grammages.
Kč214.12
View
OLFA Cutting Knife with Automatic Blade Lock, BN-AL

OLFA Cutting Knife with Automatic Blade Lock, BN-AL

eshop_010035/9
We have personally tested the very high-quality OLFA snap-off knife in our workshops. It is very safe and has an automatic blade lock. You can also order replacement blades OLF, which we can highly recommend.
Kč456.80
P2 Dust Filters for 3M Chemical Mask - Dust 7500

P2 Dust Filters for 3M Chemical Mask - Dust 7500

eshop_010095
P2 dust filters effectively protect the carbon filters 6055A2 from clogging with dust and aerosol, thus significantly extending their lifespan. We definitely recommend them especially when spraying gelcoats and paints. Plastic holders with a diameter must be ordered for the filters.
Kč313.61
PADDLE - metal roller 19 x 100 mm

PADDLE - metal roller 19 x 100 mm

eshop_503325
A frequently used roller that is particularly suitable for products made of polyester resin and glass mat. It evenly regulates the amount of resin across the entire surface of the laminate.
Kč164.71
View
PADDLE - metal roller 25 x 100 mm

PADDLE - metal roller 25 x 100 mm

eshop_503328
A frequently used roller that is particularly suitable for products made of polyester resin and glass mat. It evenly regulates the amount of resin across the entire surface of the laminate.
Kč197.65
View
PADDLE - metal roller 25 x 150 mm

PADDLE - metal roller 25 x 150 mm

eshop_503330
A frequently used roller that is particularly suitable for products made of polyester resin and fiberglass mat. It evenly regulates the amount of resin across the entire surface of the laminate.
Kč214.12
View
PE hose width 1000 mm thickness 0.05 sleeve

PE hose width 1000 mm thickness 0.05 sleeve

eshop_010144
Sleeve made of polyethylene film with a thickness of 0.05 mm. The width of the sleeve in the folded state is 1000 mm. Suitable for weaker vacuum up to 0.4 and vacuuming parts made of epoxy resins. Caution with polyesters and vinyl esters, please use a more resistant styrene film APA
Kč240.11
PE hose width 1000 mm thickness 0.10 sleeve

PE hose width 1000 mm thickness 0.10 sleeve

eshop_010145
Sleeve made from polyethylene film with a thickness of 0.1 mm. The width of the sleeve in its folded state is 1000 mm. Suitable for vacuum up to 0.9 and vacuuming parts made of epoxy resins. Be careful with polyesters and vinyl esters, please use a more resistant styrene film APA or HAV
Kč158.85
Peel Ply Fabric 50 g/m2, PLUS, width 152cm white

Peel Ply Fabric 50 g/m2, PLUS, width 152cm white

eshop_010003
A great helper not only for vacuuming. WIDTH 152 cm. The same peel ply fabric 50 with a special surface treatment for easier removal. A significant advantage especially for more complex products and for larger amounts of extracted resin. The advantage of this modified peel ply
Kč182.72
Perforated separation film ELA20 - blue - 125°C P1

Perforated separation film ELA20 - blue - 125°C P1

eshop_010186/6
This perforated film is primarily used during the vacuuming of laminated parts. In this technology, it is often not enough to rely solely on the release fabric, which ensures the passage of excess air and resin into the suction mat. The release fabric also ensures the following
Kč63.03
Peroxid SF 10 - MGS

Peroxid SF 10 - MGS

eshop_000012
Peroxide recommended for curing MGS gelcoats SF 30, T 30, T 35, T 3 PU, applied by spraying.
Kč2,150.47
peroxide dispenser - Dosimeter 1000ml

peroxide dispenser - Dosimeter 1000ml

eshop_010176/3
Great tool (see picture - larger, oval container) for easy dosing of peroxide into polyester and vinylester resins as well as gelcoats. The work is made easier primarily by the very practical and adjustable plastic straw with an opening. You can set the dispenser according to the
Kč869.68
Peroxide Dispenser - Dosimeter 500ml

Peroxide Dispenser - Dosimeter 500ml

eshop_010176
A great tool (smaller square type - see image) for easy dosing of peroxide into polyester and vinylester resins as well as gelcoats. The work is made easier primarily by a very practical and adjustable plastic straw with an opening. You can set the dispenser according to your needs
Kč790.61
Peroxide K1 for curing polyester resins

Peroxide K1 for curing polyester resins

eshop_000021
The best in the resins we offer. Please do not try untested ones, it is risky and very costly! Recommended mixing ratio 0.8-3% depending on the ambient temperature and the thickness of the laminated part.
Kč398.60
Plastic bowl 500 g, round 101 x 101 mm

Plastic bowl 500 g, round 101 x 101 mm

eshop_46500
Plastic, clear cup for mixing resins and paints made of durable polypropylene. Capacity 500 ml.\nThe package contains 1000 pcs. Smaller quantities can also be ordered individually, see price list.
Kč2.42
Plastic bowl 500ml, diameter 15.5 cm

Plastic bowl 500ml, diameter 15.5 cm

eshop_43500
The plastic bowl 500 ml has a diameter of 15.5 cm. It has 2 practical handles for holding. It is resistant to polyester and epoxy resins and acetone. It is made of polypropylene and cured resin residues can be easily peeled out of the bowl.
Kč2.20
Plastic Canister 10 l including lid

Plastic Canister 10 l including lid

eshop_010103
Square canister with handle including lid. Versatile use for liquid and bulk materials Suitable for water, wine, oil, and some chemicals.
Kč92.24
Plastic round bowl, 500ml, 46975 (low)

Plastic round bowl, 500ml, 46975 (low)

eshop_15865
Plastic, clear cup for mixing resins and paints made of durable and thicker polypropylene. Volume 500 ml. The package contains 1000 pcs. Smaller quantities can also be ordered individually, see price list. §! Due to rounding of small amounts, please consider only the price
Kč4.83
Plastic Wedge - Medium 55 x 150 mm

Plastic Wedge - Medium 55 x 150 mm

eshop_010373
The plastic wedge is made of tough and durable plastic. It is used for removing laminated parts from molds in places where it is necessary to create pressure between the mold and the part. The material from which the wedge is made is very gentle on the surfaces of molds and finished products.
Kč199.12
Plastic Wedge - Small 40 x 100 mm

Plastic Wedge - Small 40 x 100 mm

eshop_010372
The plastic wedge is made of tough and durable plastic. It is used for removing laminated parts from molds in places where it is necessary to create pressure between the mold and the part. The material from which the wedge is made is very gentle on the surfaces of molds and finished products.
Kč180.08
Polishing Paste White RIWAX

Polishing Paste White RIWAX

eshop_010378
High-quality polishing paste popular and tested in our workshops. Silicone-free. For final polishing, use Riwax green paste.
Kč790.61
Polyester Gelcoat White GS 2000 H - Norpol

Polyester Gelcoat White GS 2000 H - Norpol

eshop_000016
The secret of smooth surfaces. It creates a smooth visible layer depending on the surface of the mold. The surface does not require any further treatment after removal from the mold. We create the surface directly in the mold. The paintable gelcoat is a two-component system, mix 1-3 before use.
Kč514.63
Polyester gelcoat/Vorgelat/ T 30 - MGS - clear

Polyester gelcoat/Vorgelat/ T 30 - MGS - clear

eshop_000008/a
Gelcoat with high scratch resistance. For curing, use Peroxide SF 10, resin to peroxide mixing ratio=100:10. Workability 25min. Gel time 150min. Full curing 5-6 hours, final state after 2-3 days at room temperature. For coloring is
Kč1,445.36
Polyester gelcoat/Vorgelat/ T 35 - MGS

Polyester gelcoat/Vorgelat/ T 35 - MGS

eshop_000010/1
Specially developed gelcoat for aircraft manufacturing with excellent parameters. Available only in white. For best results, we recommend using original peroxides and thinners. Can be diluted with SF thinner up to 10 weight parts. Pigments can be used for coloring.
Kč1,288.41
Polyester Gelcoat/Vorgelat/ T 35 SH - MGS

Polyester Gelcoat/Vorgelat/ T 35 SH - MGS

eshop_000010/2
Equivalent to polyester gelcoat T 35 - SH variant. The working procedure is the same as for T 35. Due to its thinner consistency, this type is particularly suitable for spray application. SH means that a thinner SH has already been added to the gelcoat.
Kč1,295.73
Polyester Resin Havelpol H 834 - REA 30W

Polyester Resin Havelpol H 834 - REA 30W

eshop_000040/32
!!New formula - different resin color!!\n\nPolyester resin H 834 is a medium-reactive thixotropic, pre-accelerated with controlled exotherm and low shrinkage. It is intended for the production of boats and other composite parts, suitable for both manual application.
Kč316.25
Polyester Resin Polylite 32032-20

Polyester Resin Polylite 32032-20

eshop_900493
It is a colorless, absolutely clear, accelerated, UV stabilized orthophthalic resin with low viscosity and reactivity. APPLICATION. Optimal curing only with Peroxide K1!! POLYLITE® 32032-20 is primarily intended for applications where extreme clarity is required.
Kč499.62
Potex Antistatic Paper Coverall with Hood Size 56-58

Potex Antistatic Paper Coverall with Hood Size 56-58

eshop_010181/3
Thin coverall with a hood made of non-woven fabric 60g/m2 antistatic and dust-resistant. Short-term protection against accidental splashes of diluted chemicals. Complies with standards F 1006Aa, ČSN EN 340, EN 1149-5, CE 1023.
Kč254.97
Primalona - hand cream

Primalona - hand cream

eshop_900000
High-quality metal drum with a large and tight lid. The delivery includes a robust lever hoop for easy sealing of the drum, including a plastic seal. This drum has an ADR certificate for the storage and transport of hazardous substances. The drum is a perfect solution
Kč541.72
RADIUS - metal roller 25 x 100 mm

RADIUS - metal roller 25 x 100 mm

eshop_503360
Roller with cross-grooving and barrel shape, making it suitable for pushing out bubbles and resin in shaped laminates. The barrel shape of the roller allows it to respond to various curvatures of the mold and adjust the path of the roller accordingly.
Kč247.07
Reactivated Carbon MAC6D40

Reactivated Carbon MAC6D40

eshop_010118/2
Reactivated activated carbon is used as a filling for extraction filters in laminating shops, paint shops, and other operations that use materials containing organic substances, just like non-reactivated carbon. Activated carbon, due to its enormous porosity, has over 1000 m2 of surface area.
Kč171.30
Release Fabric 64g/m2, with red stripe, width 1630mm

Release Fabric 64g/m2, with red stripe, width 1630mm

eshop_900281
A great helper not only during vacuuming. It separates the final product from auxiliary materials /suction mat/ and simultaneously allows the resin to pass through. After curing and removal, it leaves a cohesive micro-bubble-free matte surface. Additionally, after removal, there is no need to sand the surface.
Kč144.07
Replacement snap-off blades LB-50BH

Replacement snap-off blades LB-50BH

eshop_010036/2
High-quality snap-off blades for the OLFA AL-LB cutting knife. The original packaging contains 10 pieces, so we recommend purchasing the entire package. It is also possible to buy them individually, but these are not packaged in the original packaging. The price is for 1 piece.
Kč21.23
RIVERTABLE WWB Hardener

RIVERTABLE WWB Hardener

eshop_000034/1
Hardener for casting epoxy resin for creating casts with a thickness of 0-7cm. For example, pouring wooden table slabs into so-called Rivertables, etc.\n\nExcellent UV stability, clarity, colorless with the possibility of tinting using dyes and pigments
Kč723.27
Robuso scissors 1010/E/9

Robuso scissors 1010/E/9

eshop_010147
The total length of the scissors is 23.5 cm, the cutting length is 9.8 cm. Due to their handle shape, they are well-suited for cutting on a table. Completely nickel-plated. They are used for cutting lightweight fabrics.
Kč2,228.98
Robuso scissors 508/E/4.5

Robuso scissors 508/E/4.5

eshop_010152
The total length of the scissors is 11.8 cm, the cutting length is 2.8 cm. These scissors have a long handle. They are used for cutting paper, films, and for reproduction work. Angled blades.
Kč1,466.47
Rubber Vacuum Valve

Rubber Vacuum Valve

eshop_010164
Designed for vacuuming when using foil. Very easy to use. The inner diameter of the suction valve is 8 mm.
Kč104.54
Sleeve Protector (forearm sleeve)

Sleeve Protector (forearm sleeve)

eshop_010203/1
Ideal and inexpensive protection for your work clothes and arms against splashes and dust. The sleeve protector is 55 cm long and protects your sleeves from resin. Especially when laminating into deeper molds, the sleeve protector prevents unwanted contact with resin.
Kč27.09
Small cutting wheel 28 mm, complete

Small cutting wheel 28 mm, complete

eshop_010026/1
A great and time-tested tool for cutting fiberglass and carbon fabrics. Cuts up to 20 layers of fabric at once. You will achieve the longest blade durability and cutting efficiency on a linoleum mat.
Kč145.18
Spiral tubing 6 mm

Spiral tubing 6 mm

eshop_800018/10
Spiral tubing for resin distribution during vacuum infusion. Inner diameter 4mm outer 6mm.
Kč37.33
Thinner for epoxy spray gelcoat EG 100-W and EG 100-T

Thinner for epoxy spray gelcoat EG 100-W and EG 100-T

eshop_001047
Thinner for epoxy solvent-based coatings. An addition of 5-20% thinner will significantly change the viscosity of the gelcoat, making it suitable for spraying. A larger amount may significantly alter the properties of the cured gelcoat.
Kč500.72
Transparent Polyester Casting Resin

Transparent Polyester Casting Resin

eshop_010288/1
It is a colorless, absolutely clear, accelerated, UV stabilized orthophthalic resin with low viscosity and reactivity. APPLICATION. Optimal curing only with Peroxide K1!! The transparent casting resin is primarily intended for applications where ext is required
Kč435.57
Tvrdidlo P 11 do EP 512, 531 a 371

Tvrdidlo P 11 do EP 512, 531 a 371

eshop_001040
Hardener P 11 is used for curing epoxy resins in the construction industry, in the production of composites and adhesives. It is a flammable and corrosive liquid with a characteristic odor. The advantage of the hardener is its low mixing ratio, which significantly reduces costs for
Kč980.80
Two-component multipurpose adhesive Araldit AW...

Two-component multipurpose adhesive Araldit AW 106(Araldit 2011)

eshop_001074/1
High-quality multipurpose adhesive with a longer processing time of approximately 120 minutes. Shear strength at 23°C (N/mm2), Tg 47°C, and operating temperature 80°C. Recommended hardener HV 953U and mixing ratio 100:80 by weight. Curing after 100 hours at 23°C.
Kč2,302.66
Two-part pins for molds 6/8 mm

Two-part pins for molds 6/8 mm

eshop_010141
a great tool for joining laminated parts that are still in the molds and the final adhesive seam must be as thin as possible. The pins are set during the mold production in the desired places on the parting line and secured against pull-out with thin glass fibers saturated with p
Kč29.50
Universal Polishing Paste 3M

Universal Polishing Paste 3M

eshop_010119
Proven paste for professional polishing of new and old molds and products. This paste has a wide range and can polish even relatively rough surfaces to a high gloss. It fully replaces the system where it is necessary to have several pastes graded according to roughness to achieve
Kč1,210.08
Vacuum butyl rubber adhesive and sealing compound - Terostat

Vacuum butyl rubber adhesive and sealing compound - Terostat

eshop_010001
Vacuum butyl rubber adhesive and sealing compound in the form of a mass. From this material, you can create any shape of sealing for your work during vacuuming. A similar material is also available in the form of strips for faster and more convenient application - you can also find it in our
Kč893.83
vacuum hose 6/8 mm

vacuum hose 6/8 mm

eshop_010117/5
Rigid vacuum hose with an outer diameter of 8 mm, inner diameter of 6 mm. Plastic connectors, coupling fittings, vacuum valve, and vacuum gauge can also be ordered.
Kč79.43
Vacuum Pump P 1 (R +G)

Vacuum Pump P 1 (R +G)

eshop_010149/1
P1 VACUUM PUMP\n\nThe product is manufactured in Germany, two-year warranty (excluding worn parts)\n\nDiaphragm vacuum pump and compressor. With integrated fine control valve and pressure gauge.\n\n\n\tHigh
Kč16,749.30
Vacuum Pump P 3 (R +G)

Vacuum Pump P 3 (R +G)

eshop_010150
P3 – VACUUM PUMP\n\nGerman product, two-year warranty (excluding consumable parts)\n\nThe pump is particularly suitable for evacuating larger areas, e.g. in aircraft construction.\n\nDiaphragm vacuum pump and compressor
Kč45,013.75
Vacuum Pump P2(R+G)

Vacuum Pump P2(R+G)

eshop_010149
P2 VACUUM PUMP\n\nGerman product, two-year warranty (excluding consumable parts)\n\nDiaphragm vacuum pump and compressor. With integrated fine control valve and vacuum gauge.\n\nSame ultimate vacuum
Kč34,469.31
vakuometr

vakuometr

eshop_010164/1
Vacuum valve from R&G, for measuring and monitoring pressure.\nMeasuring range from 0 - 1 bar.\nConnection: 1/4 (external thread)
Kč567.34
Vinylester Gelcoat NORPOL GM 60014 H - green molding

Vinylester Gelcoat NORPOL GM 60014 H - green molding

eshop_000020
The secret to smooth and professional molds for beautiful products. Suitable for molds laminated with polyester resin. You create the surface and details by accurately copying the model. It can be sanded and polished. Any repairs are easily feasible. Color green. dod
Kč691.79
Wax Film 266 1.5 mm (305x610mm)

Wax Film 266 1.5 mm (305x610mm)

eshop_010052/1
Material used to define the future space between a double-sided mold that will be used for laminating. These films can be easily shaped into more complex forms and, compared to layers formed by laminating, guarantee a constant thickness as well.
Kč990.46
Wax Film 266 2 mm (305x610 mm)

Wax Film 266 2 mm (305x610 mm)

eshop_010052/8
Material used to define the future space between a double-sided mold that will be used for laminating composites. These films can be easily shaped into more complex forms and, compared to layers formed by laminating, guarantee a constant thickness as well.
Kč1,177.14
Wax Film 266 4 mm (305x610 mm)

Wax Film 266 4 mm (305x610 mm)

eshop_010052/7
Material used to define the future space between a double-sided mold that will be used for laminating composites. These films can be easily shaped into more complex forms and, compared to layers formed by laminating, guarantee a constant thickness as well.
Kč1,915.04
Wax Solution 9872 3%

Wax Solution 9872 3%

eshop_000033
It is used for the production of top-coats, serving to seal the final layer of the laminate as protection against UV radiation and water. The resin modified in this way does not stick after curing. 1-3% of the wax solution is added to the resin. Note, without sanding the release agent
Kč616.02
Waxed film 266 0.5 mm (305x610mm)

Waxed film 266 0.5 mm (305x610mm)

eshop_010052/2
Material used to define the future space between a double-sided mold that will be used for laminating. These films can be easily shaped into more complex forms and, compared to layers formed by laminating, guarantee a constant thickness as well.
Kč815.21
Waxed film 266 2.5 mm (305x610mm)

Waxed film 266 2.5 mm (305x610mm)

eshop_010052/3
Material used to define the future space between a double-sided mold that will be used for laminating. These films are easily shaped into more complex forms and, compared to layers formed by laminating, guarantee a constant thickness even in r
Kč1,188.12
Waxed film 266 3 mm (305x610mm)

Waxed film 266 3 mm (305x610mm)

eshop_010052/4
Material used to define the future space between a double-sided mold that will be used for laminating. These films shape well even into more complex shapes and, compared to layers formed by laminating, guarantee a constant thickness as well.
Kč1,471.42
Waxed film 266 1 mm (305x610mm)

Waxed film 266 1 mm (305x610mm)

eshop_010052/5
Material used to define the future space between a double-sided mold that will be used for laminating. These films are easily shaped into more complex forms and, compared to layers formed by laminating, guarantee a constant thickness even in r
Kč917.99
Yellow Filling Wax - Plasticine - pack. 650g

Yellow Filling Wax - Plasticine - pack. 650g

eshop_010256/7
Filling wax - plasticine is a material suitable for minor repairs and adjustments of molds and models. With this material, you can easily and quickly repair chipped edges of molds or very perfectly seal gaps in the separating planes of multi-part molds.\n\nThe advantage is very
Kč475.83
Zapant Brush No. 2 (wooden handle)

Zapant Brush No. 2 (wooden handle)

eshop_229102
Brush with a wooden handle width 13 mm. The total length of the brush is 180 mm. The thickness of the brush is 3 mm and the length of the bristles is 20 mm.
Kč26.65
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text