Home

Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
CARBON, GLASS AND ARAMID ROWINGS
CARBON, GLASS AND ARAMID ROWINGS
FABRICS
FABRICS
TAPES AND BRAIDS
TAPES AND BRAIDS
PRE-PREGs
PRE-PREGs
NON-WOVEN FABRICS, FIBERGLASS MATS, FLEECE
NON-WOVEN FABRICS, FIBERGLASS MATS, FLEECE
SANDWICH MATERIALS
SANDWICH MATERIALS
Polyurethane foams
Polyurethane foams
SILICONES
SILICONES
RELEASE AGENTS AND FILLERS
RELEASE AGENTS AND FILLERS
Pigments for colouring
Pigments for colouring
Putties, Thinners
Putties, Thinners
AUXILIARY MATERIALS AND ACCESSORIES
AUXILIARY MATERIALS AND ACCESSORIES
Others
Others
Materials by Technology
Materials by Technology
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
Catalyst for HT 33

Catalyst for HT 33

eshop_710125/c
Catalyst for liquid silicone resin for casting molds and products. It is a firmer form of silicone that is still very flexible and tear-resistant. Suitable for larger molds or for less shape-demanding molds and products. Also, it
Kč1,827.20
Catalyst for HT 45

Catalyst for HT 45

eshop_710146/a
Liquid catalyst suitable for casting molds and products. Processing time 10 min. Demolding time 1:20 hours. Viscosity: 8,000 cPs. This type is very popular and achieves a Shore hardness of 45 after curing. Mixing ratio 1:1(
Kč1,581.23
Catalyst for ZA 13

Catalyst for ZA 13

eshop_710123/a
Catalyst for liquid silicone resin for casting molds and products. It is a very soft type of silicone that is still very flexible and tear-resistant. Suitable for smaller molds or for geometrically demanding molds and production.
Kč1,803.77
Catalyst for ZA 22

Catalyst for ZA 22

eshop_710124/b
Catalyst for blue silicone resin. Processing time 15 min. Demolding time 1 hour. Viscosity: 5.000 cPs. This type is very popular and achieves a Shore hardness of 22 after curing. Mixing ratio 1:1 (by weight) Silicone ZA 22 is a tre
Kč1,751.43
Glass DIRECT roving 1200 tex

Glass DIRECT roving 1200 tex

eshop_510002
Glass roving type E made from combined yarn without protective twist, suitable especially for weaving and winding. Modified especially for epoxy and polyester resins. A strand of individual glass fibers for local unidirectional reinforcement. 1200 tex (tex
Kč162.52
Glass DIRECT roving 2400 tex

Glass DIRECT roving 2400 tex

eshop_510000
Strand of individual glass fibers WITHOUT PROTECTIVE TWIST. It is used for various applications, primarily for machine processing. In manual processing, it is used for longitudinal reinforcement of manufactured parts. The designation-number, the number of tex indicates how many grams
Kč135.06
Glass Roving ASSEMBLED 2400 tex

Glass Roving ASSEMBLED 2400 tex

eshop_510001
Strand of individual glass fibers. It is used for various applications, primarily for machine processing. In manual processing, it is used for longitudinal reinforcement of manufactured parts. The designation-number, the number of tex indicates how many grams weigh 1000 mb of roving.
Kč165.08
Glass roving for edges - larger volume ECO 14 T5000 tex

Glass roving for edges - larger volume ECO 14 T5000 tex

eshop_003013
An indispensable helper for reinforcing the edges of molds and products. It significantly increases the strength of the edges, effectively removes air bubbles, and prevents chipping and sagging of the gelcoat at the edges. 5 kg=1000 meters (5000 tex) 0.5 kg=100 meters 0.1 kg=20 meters 1 linear meter
Kč321.15
Hardener for PUR 2K and 3K sl.B

Hardener for PUR 2K and 3K sl.B

eshop_010298/4
The hardener for PUR 2K 45 and 3K 90 is Isocyanate. Its description is part of the TL for PUR 2K 45 and PUR 3K 90 component A Properties of the hardener Density (20 °C) Isocyanate 1.240 g/cm3 Viscosity (25 °C) Isocyanate 240 cP/ mPa.s Weight ratio 100 Polyol 118 Isocyanate Volume
Kč510.24
Ipitherm G - 0 - 35 R - component A

Ipitherm G - 0 - 35 R - component A

eshop_000041/1
Two-component polyurethane system IPITHERM designated G-0-35R is a polyurethane-based foaming system suitable for foaming and filling hollow spaces. The mixing ratio is 100:135 (by weight). Use IPITHERM G-0-35R /component B/ as the hardener.
Kč446.92
Ipitherm G - 0 - 35 R - component B

Ipitherm G - 0 - 35 R - component B

eshop_000041/2
Two-component polyurethane system IPITHERM designated G-0-35R is a polyurethane-based foaming system suitable for foaming and filling hollow spaces. Mixing ratio 100:135 (by weight)\n\n \n\n \n\nIn 2020, the REAC regulation
Kč446.92
Liquid Silicone HT 33 - transparent LT

Liquid Silicone HT 33 - transparent LT

eshop_710125
Liquid silicone resin for casting molds and products. It is a firmer form of silicone that, despite this, is very flexible and tear-resistant. Suitable for larger molds or for less shape-demanding molds and products. This type is also popular and sought after.
Kč1,827.20
Liquid Silicone HT 45 - transparent

Liquid Silicone HT 45 - transparent

eshop_710146
Liquid transparent silicone resin suitable for casting molds and products. Processing time 10 min. Demolding time 1 hour 20 minutes. Viscosity: 8,000 cPs. This type is very popular and achieves a Shore A hardness of 45 after curing.
Kč1,581.23
Liquid Silicone ZA 13 - transparent

Liquid Silicone ZA 13 - transparent

eshop_710123
Liquid silicone resin for casting molds and products. It is a very soft type of silicone that, despite this, is very flexible and tear-resistant. Suitable for smaller molds or for geometrically demanding molds and products. This type is also obl
Kč1,803.77
Liquid Silicone ZA 22 - BLUE

Liquid Silicone ZA 22 - BLUE

eshop_710124
Liquid blue silicone resin suitable for casting molds and products. Processing time 15 min. Demolding time 1 hour. Viscosity: 5,000 cPs. This type is very popular and achieves a Shore hardness of 22 after curing. Mixing ratio 1:1 (by weight) K
Kč1,739.35
PUR 2K - 45 Polyurethane Foam sl.A

PUR 2K - 45 Polyurethane Foam sl.A

eshop_010298/2
Polyurethane foam for discontinuous production of parts and cast insulation with excellent dimensional stability. PUR 2K 45 is optionally self-extinguishing polyurethane foam intended generally for foaming into molds, whether metal, fiberglass, or wooden, i.e. for discontinuous
Kč375.18
PUR 3K - 90 Polyurethane Foam sl.A

PUR 3K - 90 Polyurethane Foam sl.A

eshop_010298/3
PUR 3K - 90 Polyurethane foam for discontinuous production of parts and cast insulation with excellent dimensional stability PUR 3K - 90 is optionally self-extinguishing polyurethane foam intended generally for foaming into molds, whether metal, fiberglass or wooden, i.e. for
Kč375.18
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text