Home

Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
CARBON, GLASS AND ARAMID ROWINGS
CARBON, GLASS AND ARAMID ROWINGS
FABRICS
FABRICS
TAPES AND BRAIDS
TAPES AND BRAIDS
PRE-PREGs
PRE-PREGs
NON-WOVEN FABRICS, FIBERGLASS MATS, FLEECE
NON-WOVEN FABRICS, FIBERGLASS MATS, FLEECE
SANDWICH MATERIALS
SANDWICH MATERIALS
Polyurethane foams
Polyurethane foams
SILICONES
SILICONES
RELEASE AGENTS AND FILLERS
RELEASE AGENTS AND FILLERS
Pigments for colouring
Pigments for colouring
Putties, Thinners
Putties, Thinners
AUXILIARY MATERIALS AND ACCESSORIES
AUXILIARY MATERIALS AND ACCESSORIES
Others
Others
Materials by Technology
Materials by Technology
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
5 Minute Epoxy Adhesive Component A

5 Minute Epoxy Adhesive Component A

eshop_001041
Professional resin primarily for bonding not only composite parts. Very suitable for manufacturing operations where it is necessary to quickly bond or fix individual parts before the actual laminating. A popular helper for more complex and demanding repairs of damage
Kč595.89
Accelerator D

Accelerator D

eshop_000004/j
Designed for Havelpol 12 resin. Recommended dosage 0.5 - 1 g of accelerator per 100 g of resin.
Kč295.17
Aramid-Diolen Fabric 170 g/m2 - Canvas, Width 120 cm (OZ)

Aramid-Diolen Fabric 170 g/m2 - Canvas, Width 120 cm (OZ)

eshop_007000
Perfect imitation of aramid-carbon fabric. Optically absolutely perfect. Suitable for products where design sells. Especially for the first and last layer. The used diolen fibers have a high modulus and their mechanical properties are close to those of aramid.
Kč676.41
Biaxial glass fabric 300 g/m2, width 1270 mm+/-45

Biaxial glass fabric 300 g/m2, width 1270 mm+/-45

eshop_006028/9
The fabric is made of two layers of diagonally arranged fibers stitched together with polyester thread. When stressed, each layer moves separately, and therefore the fibers cannot cut into each other as in conventional fabrics. The fabric is often used in aviation and construction.
Kč368.95
Biaxial Glass Fabric 450 g/m2, 127 cm wide, +/- 45

Biaxial Glass Fabric 450 g/m2, 127 cm wide, +/- 45

eshop_004069/11
Biaxial glass fabric 450g/m2 made from high-quality glass fibers. The fabric is particularly suitable for products that need to be strong yet flexible. Due to the fiber construction and their connection, the fibers cannot cut into each other, as is the case with traditional
Kč316.25
Carbon fabric 93g/m2, 1K width 100cm plain

Carbon fabric 93g/m2, 1K width 100cm plain

eshop_006005/2
The fabric is made from 1K fibers without protective twist. The fibers are therefore flatter than those of similar cheaper fabrics of this weight. Since the fabric is made from fibers without protective twist, it must be woven very slowly to avoid damaging the unit
Kč1,703.11
Clear Epoxy Gelcoat EG 100-T - for thin layers

Clear Epoxy Gelcoat EG 100-T - for thin layers

eshop_001045
This epoxy gelcoat can be applied solely by spraying. It can also be applied as a brush coating. The secret to smooth surfaces. It creates a smooth visible layer depending on the surface of the mold. The surface does not require any further treatment after being removed from the mold.
Kč1,142.00
Clear Polyester Gelcoat GS 100 S - Norpol GS Base - S

Clear Polyester Gelcoat GS 100 S - Norpol GS Base - S

eshop_000015
The secret of smooth surfaces. Creates a smooth visible layer depending on the surface of the mold. The surface requires no further treatment after removal from the mold. You create the surface directly in the mold. Financial and effective savings. Pigments can be used for coloring
Kč363.83
Cobalt Accelerator for Curing Polyester and Vinyl Ester...

Cobalt Accelerator for Curing Polyester and Vinyl Ester Resins 1 %

eshop_000026
Accelerates the curing process. Some resins are not pre-accelerated for various reasons. This accelerator allows you to accelerate them just before processing. The standard addition of the accelerator is 0.5-3% of the weight of the resin used. WARNING DO NOT MIX ACCELERATOR WITH CATALYST
Kč531.47
Crystic U 1131 T (ortho) self-extinguishing polyester...

Crystic U 1131 T (ortho) self-extinguishing polyester resin for DIN 5510

eshop_900581
CRYSTIC U 1131 T is a filled, orthophthalic, non-accelerated thixotropic unsaturated polyester resin with low styrene content. It is suitable for fire-resistant/self-extinguishing laminates with reduced smoke generation. CRYSTIC U 1131 T is halogen-free and does not contain heavy
Kč140.55
Epodur 619-0600 component B

Epodur 619-0600 component B

eshop_001069
Colorless hardener, suitable for casting systems or laminating with a longer processing time: approx. 4 hours.\n\nRiver table. Mixing ratio epoxy:hardener=100:40 by weight. Maximum layer 2cm. Subsequent curing required min. 50°C for 3 hours!
Kč975.09
Eporezit - T600 (slower hardener)

Eporezit - T600 (slower hardener)

eshop_610032
Characteristics: it is a liquid hardener for casting epoxy resins. solvent-free Not\ntoxic. It is a modified aliphatic polyamide with low exothermic reaction and long\nprocessing time, characterized by low viscosity. T-600
Kč1,223.99
Epoxidová pryskyřice L 285 (MGS)

Epoxidová pryskyřice L 285 (MGS)

eshop_001007
Very high-quality resin for the aerospace industry and for model making. The resin with hardener creates a very viscous mixture, allowing the fibers to be quickly and thoroughly impregnated. As a result, the product has significantly lower weight and higher utility value. More details
Kč945.81
Epoxy gelcoat 7060 clear

Epoxy gelcoat 7060 clear

eshop_900882
UV stabilized transparent epoxy gelcoat for the visible layer of carbon parts, more information in TL and BL:
Kč1,541.70
Epoxy Gelcoat for Mold Production Araldit SW 404

Epoxy Gelcoat for Mold Production Araldit SW 404

eshop_001052
Top-quality gelcoat for mold production. Blue in color, it is known for its unmatched durability and time-tested quality. The only disadvantage is that it cannot be polished. Chemically resistant. For curing, use hardener Araldit HY 2404 in a ratio of 100:10. Curing time
Kč1,188.85
Epoxy Gelcoat P for Mold Production, Black

Epoxy Gelcoat P for Mold Production, Black

eshop_001061
Creates a solid surface and edges of molds, is polishable and has a black color. After mixing, we recommend vacuuming in a prepared bell to remove microbubbles formed during mixing. Recommended hardeners EPH 161 (VE 3261) and EPH 573 (VE 2723). The coverage is 0.5-1 kg/m2
Kč1,256.20
Epoxy gelcoat white spray EG 100-W - for thin layers

Epoxy gelcoat white spray EG 100-W - for thin layers

eshop_001044
A solution of medium molecular weight epoxy resin in a mixture of organic solvents with the addition of additives, white shade RAL 9003. This epoxy gelcoat can be applied solely by spraying. It can also be applied as a brush coating. The secret of smooth p
Kč1,054.15
Epoxy Resin 324 ( 371 1200 )

Epoxy Resin 324 ( 371 1200 )

eshop_001037/1
Relatively inexpensive and proven resin CHS EPOXY 1200 for various applications. Characterized by high density, it is most commonly used for bonding, has good adhesion to most materials. Very tough resin. It is mixed with hardener P 11 in a ratio of 100:7 processing time
Kč398.60
Epoxy Resin 455 (formerly 512, 1505)

Epoxy Resin 455 (formerly 512, 1505)

eshop_001038
Relatively inexpensive epoxy resin suitable for the production of molds or parts where the minimum wall thickness is 1mm or more. After curing, it usually has a milky color. It is mixed with hardener P 11 in a ratio of 100:10 with a working time of 100g/20°C 15-20 min. Or with hardeners
Kč514.63
Epoxy Resin C

Epoxy Resin C

eshop_001029
Chemically resistant epoxy resin. Used in the construction of tanks, cisterns, and pipelines. Due to its parameters, it is suitable and often used in the production of fiberglass fuel tanks. The resin is quite thick, so it is advisable to preheat it before impregnating the fibers.
Kč622.97
Epoxy Resin L

Epoxy Resin L

eshop_001025
Epoxy resin suitable for impregnating glass, aramid, and carbon fibers and fabrics. With recommended hardeners, it creates a laminating system that has good adhesion to wood, steel materials, polystyrene, and other similar materials. Recommended t
Kč840.39
Epoxy Resin L 20

Epoxy Resin L 20

eshop_001027
Resin L 20 is a laminating resin suitable for most processes for laminating primarily in the aerospace industry. Epoxy resin for saturating glass, aramid, and carbon fibers. It bonds wood, metals, styrofoam, etc. It is suitable for manual lamination.
Kč1,048.73
Epoxy Resin LH 1000

Epoxy Resin LH 1000

eshop_111068
Denser epoxy resin suitable for bonding, casting, pouring, and when heated to 35°C and above also suitable for laminating and injection into warm molds, production of polymer concrete and adhesives. Hardener 133-138 (MGS) can be used in the mixing ratio of resin:hardener
Kč447.28
Epoxy Resin LH 130

Epoxy Resin LH 130

eshop_111039
Standard resin of medium viscosity based on bisphenol A with reduced crystallization ability. For curing at room temperature from 10-30°C. Used for boat building, sports equipment, model aircraft, molds, tools, adhesives, and castings. Viscosity
Kč522.68
Epoxy Resin LH 145

Epoxy Resin LH 145

eshop_111026
Epoxy resin suitable for the production of sports equipment, boats, and automotive parts. It is particularly suitable for manufacturing using glass, carbon, and aramid fibers. Hardener 133-138 (MGS) can be used in a mixing ratio of resin:hardener 100:35 by weight or harden
Kč450.21
Epoxy Resin LH 160 /HAVEL/

Epoxy Resin LH 160 /HAVEL/

eshop_111020
This is a laminating resin with medium viscosity that does not contain solvents or fillers, intended for processing and curing at room temperature. Suitable for the production of parts reinforced with glass, carbon, and aramid fibers, its features are
Kč505.11
Epoxy Resin LH 206C

Epoxy Resin LH 206C

eshop_111225
Epoxy resin LH 206C is characterized by low viscosity. It is suitable for casting. It is a modified resin. It can be used as a base for preparing fillers. In combination with hardener T 600 and hardener H 206C, castings 10 to 15 mm thick can be obtained
Kč714.48
Epoxy Resin LH 210

Epoxy Resin LH 210

eshop_111071
The epoxy system LH 210/H 10 has been developed based on your requirements for a clear and UV stable product. The system exhibits extreme clarity and minimal shrinkage. Additionally, it is very environmentally friendly and safe for your health, as it does not
Kč472.17
Epoxy Resin LH 230

Epoxy Resin LH 230

eshop_111215
Epoxy resin LH 230 is characterized by low viscosity. When cured with amines or polyamines, it offers high-quality application properties such as high mechanical properties, good chemical resistance, good thermal properties, etc. Laminating system p
Kč510.60
Epoxy Resin LH 260

Epoxy Resin LH 260

eshop_111001
Epoxy resin LH 260 for increased temperature resistance. For curing, it is advisable to use hardeners 285, 286, 287 all in a ratio of 100:40 (by weight). Also newly an excellent hardener H 146 100:30/(by weight). The product after initial curing is still gradually thermally d
Kč658.85
Epoxy Resin LH 260 with UV Stabilizer - Black

Epoxy Resin LH 260 with UV Stabilizer - Black

eshop_112217
Low-viscosity resin based on epoxy resin. The micro-particles contained in the epoxy resin give the resulting composite a black color and improve its strength under static and dynamic loading (modulus of elasticity, tensile strength, and flexural strength)
Kč515.36
Epoxy Resin LH 287

Epoxy Resin LH 287

eshop_112219
Epoxy resin LH 287 is characterized by extremely low viscosity, comparable\nto resin 285. When cured with amines or polyamines, it offers high-quality application\nproperties such as high mechanical properties and good chemical resistance
Kč571.00
Epoxy Resin LH 288

Epoxy Resin LH 288

eshop_111211
Epoxy resin LH 288 is characterized by extremely low viscosity. When curing with amines or polyamines, it offers high-quality application properties such as high mechanical properties, good chemical resistance, excellent thermal properties, etc. It is
Kč533.30
Epoxy Resin LH 289

Epoxy Resin LH 289

eshop_112220
Epoxy resin LH 289 is characterized by extremely low viscosity. During curing, it offers high-quality application properties such as optimal mechanical properties, good chemical resistance, excellent thermal properties, etc. It is suitable for the production of comp
Kč505.11
Epoxy Resin LH 300

Epoxy Resin LH 300

eshop_111027
Very high-quality, medium-viscosity low-molecular resin for laminating parts with high resistance (up to 160°C). Must be cured at 90°C for a minimum of 3 hours. It is mixed with hardener H 300 (10:25) for temperature resistance up to 120°C or with hardener H 512 (
Kč727.66
Epoxy Resin LH 301

Epoxy Resin LH 301

eshop_112216
Epoxy resin LH 301 is a resin that allows achieving temperature resistance of around 160°C with the appropriately selected hardener H 513. When curing with amines or polyamines, it offers high-quality application properties such as high mechanical properties, good ch
Kč625.17
Epoxy Resin LH 330

Epoxy Resin LH 330

eshop_111057
Flexible epoxy resin suitable for curing at room temperature. The appropriate hardener is H 330, mixing ratio 100:40 by weight or 100:50 by volume. Gel time at 25 degrees Celsius is 70 min. Thermal resistance 50 degrees Celsius. Viscosity of the mixture at 25 degrees
Kč481.69
Epoxy Resin LH 385

Epoxy Resin LH 385

eshop_111242
Epoxy resin LH 385 is characterized by low viscosity. The cured product is slightly flexible.\n\nWhen cured with amines or polyamines, it offers high-quality application properties such as high mechanical properties,\ngood chemical resistance,
Kč505.11
Epoxy Resin RIVERTABLE WWA

Epoxy Resin RIVERTABLE WWA

eshop_000034
Pouring epoxy resin designed primarily for creating casts with a thickness of 0-9cm. For example, pouring wooden table slabs into so-called Rivertables, etc.\n\nExcellent UV stability, clarity, colorless with the possibility of tinting using dyes and pigments, curing
Kč590.03
Epoxy Resin Surface Araldite SW 419-1

Epoxy Resin Surface Araldite SW 419-1

eshop_001074
Areas of use . tools for sheet forming . general mold production Processing methods Application using a brush or spatula Characteristic features . well spreadable . does not run . minimal sedimentation For curing, it is necessary to mix Hardener HV 2419 in
Kč951.67
Glass fabric 200 g/m2 - cs-interglas 92112

Glass fabric 200 g/m2 - cs-interglas 92112

eshop_004097/1
High-quality yarn fabric. Certified production. Fabric, number of fibers per cm2 warp x weft 8x6.5. Used fiber in the warp EC9 136 and in the weft EC9 136 Thickness: 0.20 mm. Only on order, minimum order 100m2. For regular or larger orders
Kč131.62
Glass fabric 47.5 g/m2 - Interglas 02037 / ST 1080, width...

Glass fabric 47.5 g/m2 - Interglas 02037 / ST 1080, width 110 cm

eshop_004071
High-quality yarn fabric. Canvas, number of fibers per cm2 warp x weft 24x18.5. The fiber used in the warp is EC5 11 and in the weft is EC5 11. Thickness: 0.06 mm. A second choice is also available, a material that did not pass rigorous tests and cannot be used for all
Kč280.01
Glass fabric Interglas 105 g/m2- 91111 FK 144 width...

Glass fabric Interglas 105 g/m2- 91111 FK 144 width 100cm, satin

eshop_004073/1
High-quality yarn fabric. Certified production. 4 satin, number of fibers per cm2 warp x weft 24x23. The fiber used in the warp is EC5 11x2 and in the weft EC5 11x2 Thickness: 0.14 mm. A second choice is also available, a material that has not passed rigorous tests and cannot
Kč398.24
Hardener 133 (MGS)

Hardener 133 (MGS)

eshop_001017
Hardener for curing epoxy resin L 135, L 160, L, LR, LR 10O, LH 1000, LH 130, LH 160, LH 175, LH 145 Mixing ratio is 100:35/by weight/ or 100:40/by volume/. Pot life for 100g/20 C is 10-15 min. Minimum order quantity is 25kg!
Kč933.36
Hardener 134 (MGS)

Hardener 134 (MGS)

eshop_001018
Hardener for curing epoxy resin L 135, L 160, L, LR, LR 100, LH 160\nMixing ratio is 100:35 /by weight/ or 100:40 /by volume/, working time 100g / 20 C 20 min.\nFor more detailed processing instructions see tech. data sheets MGS.\nAdditional necessary info
Kč819.90
View
Hardener 135 (MGS)

Hardener 135 (MGS)

eshop_001008/1
Hardener for curing epoxy resin L 135, L 160, L, LR, LR, LR 100, LH 160. The mixing ratio is 100:35/by weight/ or 100:40/by volume/. Processing time for 100g /20 C is 25-30 min. Further necessary information can be obtained at http://www.momentive.com/
Kč819.90
Hardener 136 (MGS)

Hardener 136 (MGS)

eshop_001019
Hardener for curing epoxy resin L 135, L 160, L, LR, LR, LR 100, LH 160. The mixing ratio is 100:35/by weight/ or 100:40/by volume/. Processing time for 100g /20 C is 1 - 2 hours. Further necessary information can be obtained at http://www.momentive.com/
Kč948.74
Hardener 285 (MGS)

Hardener 285 (MGS)

eshop_001009
Hardener for curing epoxy resin 285. The mixing ratio is 100:40 /by weight/ 100:50 /by volume/ Processing time 100g / 20 C 50 minutes. For more detailed processing instructions see the technical data sheets MGS. Additional necessary information can be obtained at http://www.moment
Kč1,172.74
Hardener 286 (MGS)

Hardener 286 (MGS)

eshop_001010
Hardener for curing epoxy resin 285. The mixing ratio is 100:40 /by weight/ 100:50 /by volume/ Working time 100g / 20 C 2 h. For more detailed processing instructions see the tech. sheets MGS. Further necessary information can be obtained at http://www.momentive.c
Kč1,156.27
Hardener 287 (MGS)

Hardener 287 (MGS)

eshop_001011
Hardener for curing epoxy resin 285. The mixing ratio is 100:40 /by weight/ 100:50 /by volume/ Processing time 100g / 20 C 4 h. For more detailed processing instructions see the technical data sheets MGS. Further necessary information can be obtained at http://www.momentive.c
Kč1,583.95
Hardener C

Hardener C

eshop_001030
Hardener for curing epoxy resin C. Mixing ratio resin:hardener= 100:60 (by weight). Processing time: 50 min. Details can be found in the R+G Handbook p.77/78
Kč812.58
Hardener H 10

Hardener H 10

eshop_111070
Hardener H 10 is used for curing epoxy systems with increased UV stability* primarily for casting, laminating, coating, and adhesive epoxy systems. Processing can take place at a minimum of 10°C. The advantages of the products are excellent smoothness and good surface
Kč566.61
Hardener H 100 for epoxy spray gelcoat EG 100-W and EG 100-T

Hardener H 100 for epoxy spray gelcoat EG 100-W and EG 100-T

eshop_001046
Hardener for epoxy gelcoats. Mixing for EG 100 T: H100= 100:40 and for EG 100 W:H100= 100:26 by weight. Mix the gelcoat and hardener in the prescribed ratio and stir thoroughly. Only then can it be diluted if necessary. Do not load until the coating is fully cured.
Kč1,200.56
Hardener H 10A

Hardener H 10A

eshop_111224
Hardener H 10A is a hardener as a replacement for H10. This hardener is particularly suitable for applications where the requirement is for the clearest possible laminating system. For example, for visible layers made in the first layer from glass fabric with an aluminum surface or in case
Kč659.58
Hardener H 10B

Hardener H 10B

eshop_111227
Hardener in combination with LH 160 and LH 210, ratio 100 to 47. Suitable for encapsulating self-adhesive labels. In a layer of 1-2mm, it provides a bubble-free surface. The surface stops being sticky after about 16-24 hours. Provides a clear, more flexible composite.
Kč581.98
Hardener H 145 (HAVEL)

Hardener H 145 (HAVEL)

eshop_111032
Mixing ratio 100:33, working time 50 min. Must be tempered to at least 50°C
Kč579.78
Hardener H 146

Hardener H 146

eshop_111198
High-quality hardener for curing epoxy resins. The mixing ratio with LH 160, LH 145, and LH 130 is 100:30 by weight, with a processing time of 50-60 min. The minimum curing temperature is 25 °C, but 30 °C and above is recommended.
Kč512.44
Hardener H 147 (HAVEL)

Hardener H 147 (HAVEL)

eshop_111030
Top-quality hardener for epoxy resin LH 160 recommended for the production of certified parts not only in aviation. Mixing ratio 100:25, slow hardener with a working time of 90 min. To achieve the parameters for which this hardener is recommended, it is necessary to tem
Kč566.61
Hardener H 206C

Hardener H 206C

eshop_111226
Hardener H 206C is a hardener for casting epoxy resins. It is suitable for preparing clear composites for all types of laminations at temperatures above 15°C. The cured resin is not brittle and does not require conditioning, although higher thermal resistance of the cured resin can be achieved.
Kč722.53
Hardener H 25

Hardener H 25

eshop_111067
Hardener H 25 was developed as a replacement for P 11. Unlike hardener P 11, no harmful vapors are released during processing, and additionally, the cured epoxy exhibits significantly higher strengths. The hardener is suitable not only as a replacement in epoxy resins from Spolchemi
Kč629.30
Hardener H 282

Hardener H 282

eshop_112219/1
Cured polyvinyl chloride foam for the production of sandwich structures with higher thermal resistance. Panel size: 2150x1000 mm. Suitable for laminating and bonding with polyester, vinylester, or epoxy. PVC foam coated with glass, aramid, carbon or
Kč433.37
View
Hardener H 285 HAVEL

Hardener H 285 HAVEL

eshop_111260/1
The laminating resin and hardener system was developed as a direct replacement for the well-known LR 285 system from MGS (Hexion). It is suitable for the production of composites using glass, carbon, and aramid fibers and is characterized by high static and dynamic properties.
Kč737.91
Hardener H 286 HAVEL

Hardener H 286 HAVEL

eshop_111091
The laminating resin and hardener system was developed as a direct replacement for the well-known LR 285 system from MGS (Hexion). It is suitable for the production of composites using glass, carbon, and aramid fibers and is characterized by high static and dynamic properties.
Kč702.77
Hardener H 287 HAVEL

Hardener H 287 HAVEL

eshop_111260
The laminating resin and hardener system was developed as a direct replacement for the well-known LR 285 system from MGS (Hexion). It is suitable for the production of composites using glass, carbon, and aramid fibers and is characterized by high static and dynamic properties.
Kč1,057.08
Hardener H 289

Hardener H 289

eshop_111118/2
Characteristics: it is a liquid hardener for epoxy resins. The hardener is based on cycloaliphatic polyamine. Physical parameters: Viscosity at 25°C 7 - 11 m Pa.s. Hydrogen equivalent 59 g Density at 20 °C 930- 960 kg/m 3 Application: Hardener H 289 is
Kč742.30
Hardener H 300

Hardener H 300

eshop_111025
Fast hardener with reduced exotherm, high temperature resistance (approx. 90°C) and high flexibility. Used in HAVEL and MGS epoxy resins. We recommend tempering at a minimum of 50°C. Hardening ratio 100:25
Kč934.10
Hardener H 330

Hardener H 330

eshop_111059
H 330 is suitable for epoxy LH 330, mixing ratio epoxy:hardener = 100:40 by weight or 100:50 by volume. Gel time at 25 degrees Celsius is 70 min. Thermal resistance is 50 degrees Celsius. Viscosity of the mixture at 25 degrees Celsius is 450 mPas/s. The material was developed
Kč547.57
Hardener H 505

Hardener H 505

eshop_111118
Hardener H 505 is a hardener for epoxy resins. It is suitable for all types of laminations at temperatures above 15°C. Higher thermal resistance of the cured resin can be achieved by post-curing the system at an elevated temperature of 50-60 °C. It belongs to the so-called fast hardeners. Hard
Kč512.44
Hardener H 507

Hardener H 507

eshop_111206
Characteristics: it is a liquid hardener for epoxy resins. The hardener is based on cycloaliphatic polyamine and does not contain nonylphenol. Physical parameters: Viscosity at 25°C (m Pa.s.) 7 - 11 Hydrogen equivalent g/mol 50 Density at 20 °C kg/m 3 930-
Kč513.90
Hardener H 507 A

Hardener H 507 A

eshop_111206/1
Hardener H 507 A is suitable for all types of laminations at temperatures above 15°C. Higher thermal resistance of the cured resin can be achieved by post-curing the system at an elevated temperature of 50-60 °C. Working time is approximately 40 minutes. The low viscosity of the mixture ensures quick
Kč573.93
Hardener H 508

Hardener H 508

eshop_111205
Characteristics: it is a liquid hardener for epoxy resins. The hardener is based on cycloaliphatic polyamine, the main component is Isophorone diamine. It does not contain nonylphenol. Physical parameters: Viscosity at 25°C (m Pa.s) 7 - 11 Hydrogen equivalent (g/mol)
Kč540.25
Hardener H 509

Hardener H 509

eshop_111114
Hardener H 509 is a hardener for epoxy resins. It is suitable for all types of laminations at temperatures above 15°C. Higher thermal resistance of the cured resin can be achieved by post-curing the system at an elevated temperature of 50-60 °C. Working time is approximately 70-90 m
Kč600.28
Hardener H 512

Hardener H 512

eshop_111210
Hardener H 512 is a liquid low-viscosity hardener for epoxy resins. The hardener is based on cyclic diamine. It is suitable for all types of laminations at temperatures above 15°C and where high thermal resistance is required. For proper curing, it is
Kč563.68
Hardener H 513

Hardener H 513

eshop_111213
Hardener H 513 (Previously H 284) is a hardener for epoxy resins. It is suitable for all types of laminations at temperatures above 15°C and where high thermal resistance is required. Higher thermal resistance of the cured resin can be achieved by post-curing sys
Kč538.06
Hardener H 514

Hardener H 514

eshop_111245
Hardener H 514 is a liquid low-viscosity hardener for epoxy resins. The hardener is based on cyclic diamine. Hardener H 514 is a hardener for epoxy resins. The working time is in the range of 10-15 minutes. Ratio to resin LH 206AH : H 514
Kč623.41
Hardener H 533

Hardener H 533

eshop_112228
Hardener H 533 is a liquid mixed hardener containing hydroxylated amine for low molecular weight epoxy resins. Hardener H 533 is characterized by a short processing time of 10-15 min. Hardener H 533 is a hardener for epoxy resins. It is suitable for all
Kč566.61
Hardener H 534

Hardener H 534

eshop_112229/1
Hardener H 534 is a liquid mixed hardener containing hydroxylated amine for low molecular weight epoxy resins. Hardener H 534 is characterized by a short processing time of 15-25 min. It is suitable for all types of laminations at temperatures above 15°C. Processing time
Kč440.69
Hardener H 535

Hardener H 535

eshop_111218
Hardener H 535 is a liquid mixed hardener containing hydroxylated amine for low molecular weight epoxy resins. Hardener H 535 is characterized by a short processing time of 25-30 min. Hardener H 535 is a hardener for epoxy resins. It is suitable for all
Kč566.61
Hardener H 536

Hardener H 536

eshop_111219
Characteristics: Hardener H 536 is a liquid mixed hardener containing hydroxylated amine for low molecular weight epoxy resins. Hardener H 536 is characterized by a longer processing time of 60-80 min. It is suitable for all types of laminations at temperatures
Kč661.04
Hardener H 538

Hardener H 538

eshop_111243
Hardener H 538 is a hardener for epoxy resins. It is suitable for\nmost laminations at temperatures above 15°C. Working time is 60-80\nmin. The product is not brittle. The composite is recommended to be\ntempered at 50°C for 3 – 5 hours. Higher temperatures
Kč801.16
Hardener HV 2419

Hardener HV 2419

eshop_001075
Hardener designed for epoxy gelcoat Araldite SW 419-1\nMixing ratio 100:13 /by weight/
Kč1,839.79
Hardener HY 2404

Hardener HY 2404

eshop_001053
Hardener for curing epoxy gelcoat Araldit SW 404 Mixing ratio 100:10 /by weight/ working time 25-30 min.
Kč1,672.59
Hardener L

Hardener L

eshop_001026
Hardener for curing resin L and EP gelcoats /R&G/, mixing ratio 100:40 (by weight), processing time 40 min.
Kč989.00
Hardener REN HY 5159 for RENGEL SW 56

Hardener REN HY 5159 for RENGEL SW 56

eshop_001123/2
Hardener for the molding gelcoat SW 56. Recommended dosage of hardener HY 5159 in the ratio epoxy:hardener= 100:10 (by weight). After gradual tempering, heat-resistant up to 120°C, the processing time at 25°C and 250ml is 25-30 min.
Kč2,459.69
Hardener VE 3261 (now EPH 161)

Hardener VE 3261 (now EPH 161)

eshop_001076
Hardener for curing epoxy resin L 20 (100:25 by weight) or Gelcoat P (100:17 by weight). Working time: 90 min. It is necessary to follow the curing instructions: 24 h at room temperature followed by post-curing for 15 h at 60 degrees
Kč975.09
Havel Adhesive G 40 sl. B 30

Havel Adhesive G 40 sl. B 30

eshop_111121
Havel Adhesive G 40 component A5 + B30 (epoxy adhesive) is an epoxy system based on a mixture of epoxy resin and reactive thinner, cured with a mixed modified hardener.\nAppearance of components A5 light gray, B30 yellow\nUsage:\nIt is recommended for
Kč1,019.89
Havel Adhesive G 40 sl.A 5

Havel Adhesive G 40 sl.A 5

eshop_111120
Structural adhesive for bonding laminated and wooden parts of materials such as Herex. It is also suitable for bonding parts made of polyester resin. The adhesive was developed especially for gluing parts that are not completely precise and require careful alignment during bonding.
Kč1,182.26
HAVELcell E1 component A

HAVELcell E1 component A

eshop_111101
The HAVELcell E1 epoxy foam is a structured epoxy resin with a specific gravity of approximately 550 kg/m3. Due to its low density, you can create a sandwich construction in your products. This material will save you time and reduce costs for your products. Part kt
Kč860.16
HAVELcell E1 component B

HAVELcell E1 component B

eshop_111102
HAVELcell E1 component B epoxy foam is a hardener for curing HAVELcell E1 component A epoxy foam in a ratio of 100:35 (by weight)
Kč1,169.82
HAVELcell P1 - Polyester Foam for Sandwich Production

HAVELcell P1 - Polyester Foam for Sandwich Production

eshop_111100
Reinforced white foam based on orthophthalic polyester resin. It has a viscosity similar to that of a sealant, is thixotropic, and does not run even at a layer thickness of 5 mm. The foam is suitable for creating sandwich structures directly in the mold. By using this foam, you can also significantly reduce
Kč349.19
Havelgelcoat 65 - polyester clear - brushable

Havelgelcoat 65 - polyester clear - brushable

eshop_000040/55
Havelgelcoat 65 is a pre-accelerated isophthalic gelcoat designed for application into molds. It is designed for brush application.\nIt is intended for use in the marine, construction, and transportation industries. It is also suitable for general use. It excels in durability
Kč541.72
Havelgelcoat 65 - polyester white - brushable

Havelgelcoat 65 - polyester white - brushable

eshop_000040/26
Havelgelcoat 65 is a pre-accelerated isophthalic gelcoat designed for application in molds. It is designed for brush application.\nIt is intended for use in the marine, construction, and transportation industries. It is also suitable for general use. It excels in durability
Kč511.85
Havelgelcoat 97 - polyester clear - brushable

Havelgelcoat 97 - polyester clear - brushable

eshop_000040/28
Havelgelcoat 97 is a pre-accelerated isophthalic gelcoat designed for application in molds. It has excellent adhesion to epoxy resins and pre-pregs. Suitable for brush application, Havelgelcoat 97 can be available in a wide range of colors. The processing technique is at one
Kč497.79
HAVELinhibit 1

HAVELinhibit 1

eshop_100022
Material suitable for extending gel-time. An excellent aid in the production of large or complex products made from polyester and vinylester resins, especially during the summer months. Recommended dosage 0.1 - 0.6% (by weight)
Kč857.60
HAVELPOL - 2 - white 2%

HAVELPOL - 2 - white 2%

eshop_111195
HAVELpol 2 - white RAL 9010 polyester resin. It is a pre-accelerated polyester resin developed for hand lamination or spraying. It is suitable for the production of products where coloring is required - bathtubs and other sanitary products. For curing
Kč360.17
HAVELPOL - 4

HAVELPOL - 4

eshop_000040/5
HAVELpol 4 is a clear yellowish unaccelerated polyester resin. To cure, it is necessary to mix in two additional components: Accelerator-cobalt and Catalyst-peroxide. The resin is suitable for manual lamination of transparent parts with high resistance and requirements
Kč354.31
HAVELPOL - 5 CLEAR non-accelerated!

HAVELPOL - 5 CLEAR non-accelerated!

eshop_000040/6
HAVELpol 5 polyester resin is suitable for the production of strength-demanding parts that must withstand greater loads. Note that the resin is not pre-accelerated - A CATALYST AND ACCELERATOR ARE REQUIRED FOR CURING! To cure, add the Peroxi catalyst
Kč316.25
HAVELPOL -1

HAVELPOL -1

eshop_000040/2
Basic orthophthalic resin, pre-accelerated, thixotropic and simultaneously low-emission. It is suitable for products that do not require high strength. For lamination, basic peroxides such as Butanox M 50 or peroxide K 1 are suitable. Basic mixing ratio 100:1-2 (note it is not a sou
Kč209.37
HAVELPOL -2 - new formulation

HAVELPOL -2 - new formulation

eshop_000040/3
Standard orthophthalic polyester resin HAVELpol 2. It is a pre-accelerated polyester resin developed for hand lamination or spraying. For curing, add peroxide K1 or Butanox M50 in a ratio of 100:1-3 by weight. Pot Life at 1% Butanox
Kč346.99
High-Temperature Epoxy Resin Araldit SW 18

High-Temperature Epoxy Resin Araldit SW 18

eshop_001052/2
Green polishable epoxy gelcoat for mold making for hand lamination, vacuum infusion, and RTM, also suitable for the production of polyester parts (gelcoat resistant to styrene). For curing, use hardener Araldit HY 5159 in a weight ratio of 100:16.
Kč1,603.19
LH 260 with Defoamer

LH 260 with Defoamer

eshop_112218/1
General: Epoxy resin LH 260 with defoamer contains added substances based on a silicone-free defoamer suitable for all applications. The defoamer allows for faster removal of microbubbles from the future composite. Epoxy resin LH 260 is
Kč531.47
Peroxid SF 10 - MGS

Peroxid SF 10 - MGS

eshop_000012
Peroxide recommended for curing MGS gelcoats SF 30, T 30, T 35, T 3 PU, applied by spraying.
Kč2,150.47
Peroxide K1 for curing polyester resins

Peroxide K1 for curing polyester resins

eshop_000021
The best in the resins we offer. Please do not try untested ones, it is risky and very costly! Recommended mixing ratio 0.8-3% depending on the ambient temperature and the thickness of the laminated part.
Kč398.60
Polyester Gelcoat White GS 2000 H - Norpol

Polyester Gelcoat White GS 2000 H - Norpol

eshop_000016
The secret of smooth surfaces. It creates a smooth visible layer depending on the surface of the mold. The surface does not require any further treatment after removal from the mold. We create the surface directly in the mold. The paintable gelcoat is a two-component system, mix 1-3 before use.
Kč514.63
Polyester gelcoat/Vorgelat/ T 30 - MGS - clear

Polyester gelcoat/Vorgelat/ T 30 - MGS - clear

eshop_000008/a
Gelcoat with high scratch resistance. For curing, use Peroxide SF 10, resin to peroxide mixing ratio=100:10. Workability 25min. Gel time 150min. Full curing 5-6 hours, final state after 2-3 days at room temperature. For coloring is
Kč1,445.36
Polyester gelcoat/Vorgelat/ T 35 - MGS

Polyester gelcoat/Vorgelat/ T 35 - MGS

eshop_000010/1
Specially developed gelcoat for aircraft manufacturing with excellent parameters. Available only in white. For best results, we recommend using original peroxides and thinners. Can be diluted with SF thinner up to 10 weight parts. Pigments can be used for coloring.
Kč1,288.41
Polyester Gelcoat/Vorgelat/ T 35 SH - MGS

Polyester Gelcoat/Vorgelat/ T 35 SH - MGS

eshop_000010/2
Equivalent to polyester gelcoat T 35 - SH variant. The working procedure is the same as for T 35. Due to its thinner consistency, this type is particularly suitable for spray application. SH means that a thinner SH has already been added to the gelcoat.
Kč1,295.73
Polyester Resin Havelpol H 834 - REA 30W

Polyester Resin Havelpol H 834 - REA 30W

eshop_000040/32
!!New formula - different resin color!!\n\nPolyester resin H 834 is a medium-reactive thixotropic, pre-accelerated with controlled exotherm and low shrinkage. It is intended for the production of boats and other composite parts, suitable for both manual application.
Kč316.25
Polyester Resin Polylite 32032-20

Polyester Resin Polylite 32032-20

eshop_900493
It is a colorless, absolutely clear, accelerated, UV stabilized orthophthalic resin with low viscosity and reactivity. APPLICATION. Optimal curing only with Peroxide K1!! POLYLITE® 32032-20 is primarily intended for applications where extreme clarity is required.
Kč499.62
RIVERTABLE WWB Hardener

RIVERTABLE WWB Hardener

eshop_000034/1
Hardener for casting epoxy resin for creating casts with a thickness of 0-7cm. For example, pouring wooden table slabs into so-called Rivertables, etc.\n\nExcellent UV stability, clarity, colorless with the possibility of tinting using dyes and pigments
Kč723.27
Thinner for epoxy spray gelcoat EG 100-W and EG 100-T

Thinner for epoxy spray gelcoat EG 100-W and EG 100-T

eshop_001047
Thinner for epoxy solvent-based coatings. An addition of 5-20% thinner will significantly change the viscosity of the gelcoat, making it suitable for spraying. A larger amount may significantly alter the properties of the cured gelcoat.
Kč500.72
Transparent Polyester Casting Resin

Transparent Polyester Casting Resin

eshop_010288/1
It is a colorless, absolutely clear, accelerated, UV stabilized orthophthalic resin with low viscosity and reactivity. APPLICATION. Optimal curing only with Peroxide K1!! The transparent casting resin is primarily intended for applications where ext is required
Kč435.57
Tvrdidlo P 11 do EP 512, 531 a 371

Tvrdidlo P 11 do EP 512, 531 a 371

eshop_001040
Hardener P 11 is used for curing epoxy resins in the construction industry, in the production of composites and adhesives. It is a flammable and corrosive liquid with a characteristic odor. The advantage of the hardener is its low mixing ratio, which significantly reduces costs for
Kč980.80
Two-component multipurpose adhesive Araldit AW...

Two-component multipurpose adhesive Araldit AW 106(Araldit 2011)

eshop_001074/1
High-quality multipurpose adhesive with a longer processing time of approximately 120 minutes. Shear strength at 23°C (N/mm2), Tg 47°C, and operating temperature 80°C. Recommended hardener HV 953U and mixing ratio 100:80 by weight. Curing after 100 hours at 23°C.
Kč2,302.66
Unidirectional Carbon Fiber 400 g/m2, 50 cm wide...

Unidirectional Carbon Fiber 400 g/m2, 50 cm wide connected with a grid

eshop_006050
Unidirectional carbon fibers 50K spread in width and connected with a grid. The material is suitable for the production of tubes, profiles, and other products that need to be reinforced longitudinally or also transversely.\nSuitable for most commonly used resins.
Kč899.25
Vinylester Gelcoat NORPOL GM 60014 H - green molding

Vinylester Gelcoat NORPOL GM 60014 H - green molding

eshop_000020
The secret to smooth and professional molds for beautiful products. Suitable for molds laminated with polyester resin. You create the surface and details by accurately copying the model. It can be sanded and polished. Any repairs are easily feasible. Color green. dod
Kč691.79
Wax Solution 9872 3%

Wax Solution 9872 3%

eshop_000033
It is used for the production of top-coats, serving to seal the final layer of the laminate as protection against UV radiation and water. The resin modified in this way does not stick after curing. 1-3% of the wax solution is added to the resin. Note, without sanding the release agent
Kč616.02
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text