Home

Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
CARBON, GLASS AND ARAMID ROWINGS
CARBON, GLASS AND ARAMID ROWINGS
FABRICS
FABRICS
TAPES AND BRAIDS
TAPES AND BRAIDS
PRE-PREGs
PRE-PREGs
NON-WOVEN FABRICS, FIBERGLASS MATS, FLEECE
NON-WOVEN FABRICS, FIBERGLASS MATS, FLEECE
SANDWICH MATERIALS
SANDWICH MATERIALS
Polyurethane foams
Polyurethane foams
SILICONES
SILICONES
RELEASE AGENTS AND FILLERS
RELEASE AGENTS AND FILLERS
Pigments for colouring
Pigments for colouring
Putties, Thinners
Putties, Thinners
AUXILIARY MATERIALS AND ACCESSORIES
AUXILIARY MATERIALS AND ACCESSORIES
Others
Others
Materials by Technology
Materials by Technology
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
Aerosil 200 - thixotropic filler for thickening resins

Aerosil 200 - thixotropic filler for thickening resins

eshop_002042
Suitable for thickening all resins. It is used wherever it is necessary to keep the resin in a vertical position so that it does not drip. Caution: in larger volumes, overheating of the resin may occur, leading to subsequent defects. To improve mechanical properties, add
Kč499.26
Apyral - filler for polyester resins 2E

Apyral - filler for polyester resins 2E

eshop_010379
Material suitable as a filler for polyester and epoxy resins. It reduces shrinkage during curing and suppresses the flammability of resin products. Can be filled up to 100:200 (Apiral 2E) at this filling, self-extinguishing properties are created. This material is from the waste
Kč258.12
Aramid-Diolen Fabric 170 g/m2 - Canvas, Width 120 cm (OZ)

Aramid-Diolen Fabric 170 g/m2 - Canvas, Width 120 cm (OZ)

eshop_007000
Perfect imitation of aramid-carbon fabric. Optically absolutely perfect. Suitable for products where design sells. Especially for the first and last layer. The used diolen fibers have a high modulus and their mechanical properties are close to those of aramid.
Kč676.41
Biaxial glass fabric 300 g/m2, width 1270 mm+/-45

Biaxial glass fabric 300 g/m2, width 1270 mm+/-45

eshop_006028/9
The fabric is made of two layers of diagonally arranged fibers stitched together with polyester thread. When stressed, each layer moves separately, and therefore the fibers cannot cut into each other as in conventional fabrics. The fabric is often used in aviation and construction.
Kč368.95
Biaxial Glass Fabric 450 g/m2, 127 cm wide, +/- 45

Biaxial Glass Fabric 450 g/m2, 127 cm wide, +/- 45

eshop_004069/11
Biaxial glass fabric 450g/m2 made from high-quality glass fibers. The fabric is particularly suitable for products that need to be strong yet flexible. Due to the fiber construction and their connection, the fibers cannot cut into each other, as is the case with traditional
Kč316.25
Cabosil M5 (bal.10kg)

Cabosil M5 (bal.10kg)

eshop_002042/1
Silica-based material. Like Aerosil 200, it is used for thickening resins and paints. Or for thixotropic modifications of these materials. Original packaging 10kg in a paper bag. It can be combined with other fillers such as microballoons, cotton in
Kč567.34
Carbon chopped fibers 3mm

Carbon chopped fibers 3mm

eshop_003020/6
Material suitable for mixing with polyester and epoxy resins. Together with the resin and possibly other suitable fillers such as microballoons, Cabosil can fill hard-to-reach areas, or it can be used to bond necessary parts in the laminate.
Kč2,875.20
Carbon fabric 93g/m2, 1K width 100cm plain

Carbon fabric 93g/m2, 1K width 100cm plain

eshop_006005/2
The fabric is made from 1K fibers without protective twist. The fibers are therefore flatter than those of similar cheaper fabrics of this weight. Since the fabric is made from fibers without protective twist, it must be woven very slowly to avoid damaging the unit
Kč1,703.11
Carbon Powder - Ground Fiber

Carbon Powder - Ground Fiber

eshop_002071
Ground carbon fibers are a suitable filler for most resins. They are primarily used to enhance mechanical properties and also to ensure the dissipation of electrostatic charge.
Kč1,490.31
Cotton Flakes

Cotton Flakes

eshop_002048
Areas of use: production of lightweight, non-flowing adhesives, casting elements of molds and surfaces of structural molds using a mixture with 50% content of glass fiber cuttings and 50% content of cotton flakes. Volume data serves to assess the size of the supplied quantity.
Kč434.84
FMS - pore filler

FMS - pore filler

eshop_002029/1
FMS is a pore filler for molds. It is suitable for filling the pores of molds (FMS) for molds made of fiberglass-reinforced polyester, epoxy, and other resins. It is used to fill the pores in both new molds and older molds with microporous areas and shallow surfaces.
Kč3,197.59
Formula Five - release wax-1pc -340g

Formula Five - release wax-1pc -340g

eshop_002046
FORMULA FIVE- release wax for general use, which mixes carnauba wax - the most durable protection in nature - with modern polymers and hydrocarbon waxes. Silicone is added for easy application and facilitates multiple releases
Kč603.94
Frekote 700 NC - separator

Frekote 700 NC - separator

eshop_002030
Semi-permanent polymer separator for multiple use for separating all thermosets and most moldable polymers. Ensures high slip where problematic mold geometry complicates polymer processing. 700-NC cures at normal
Kč1,677.13
Frekote B 15 - base separator

Frekote B 15 - base separator

eshop_002029
The pore filler fills the micropores of molds and fills in fine scratches on their surface. When used together with other Frekote products, B-15 acts as an excellent base layer that enhances the provided separation capabilities. It is applied with a thin even layer.
Kč5,124.35
Frekote NC 770 - separator

Frekote NC 770 - separator

eshop_002055/2
Frekote separator 770-NC is a universal release agent with high slip suitable for cases where there are problems with mold geometry. It cures quickly at room temperature and creates a glossy surface on the castings. It is applied to a clean mold surface by spraying, sh
Kč1,740.81
Glass fabric 200 g/m2 - cs-interglas 92112

Glass fabric 200 g/m2 - cs-interglas 92112

eshop_004097/1
High-quality yarn fabric. Certified production. Fabric, number of fibers per cm2 warp x weft 8x6.5. Used fiber in the warp EC9 136 and in the weft EC9 136 Thickness: 0.20 mm. Only on order, minimum order 100m2. For regular or larger orders
Kč131.62
Glass fabric 47.5 g/m2 - Interglas 02037 / ST 1080, width...

Glass fabric 47.5 g/m2 - Interglas 02037 / ST 1080, width 110 cm

eshop_004071
High-quality yarn fabric. Canvas, number of fibers per cm2 warp x weft 24x18.5. The fiber used in the warp is EC5 11 and in the weft is EC5 11. Thickness: 0.06 mm. A second choice is also available, a material that did not pass rigorous tests and cannot be used for all
Kč280.01
Glass fabric Interglas 105 g/m2- 91111 FK 144 width...

Glass fabric Interglas 105 g/m2- 91111 FK 144 width 100cm, satin

eshop_004073/1
High-quality yarn fabric. Certified production. 4 satin, number of fibers per cm2 warp x weft 24x23. The fiber used in the warp is EC5 11x2 and in the weft EC5 11x2 Thickness: 0.14 mm. A second choice is also available, a material that has not passed rigorous tests and cannot
Kč398.24
Glass Fiber Filler 0.2 mm

Glass Fiber Filler 0.2 mm

eshop_002050
Very fine filler for epoxy and polyester resins. Its advantage is the very fine grain size of 0.2mm, which, together with the use of clean glass fibers without impurities, gives the material exceptional properties. By adding this filler to the resin, you will improve
Kč467.05
Glass flour (gray)

Glass flour (gray)

eshop_002069
Suitable as a filler for resins and for many other applications
Kč76.87
HAVEL filler E1, component A

HAVEL filler E1, component A

eshop_111107/1
Two-component filler for basic filling of epoxy laminates, wood, and most metals. The advantage of this filler is its ability to auto-penetrate the filled material. In practice, this means that if the substrate requires it, part of the epoxy resin will be released immediately after application.
Kč516.10
HAVEL filler E1, component B

HAVEL filler E1, component B

eshop_111108/1
Hardener recommended for curing the epoxy putty HAVELfiller E1/A Mixing ratio 100:35 (by weight) working time is 20-30 minutes. A hardener with a longer or shorter working time can be supplied on request.
Kč670.92
HAVEL filler G - bal. 1kg

HAVEL filler G - bal. 1kg

eshop_800007
Polyester two-component filler with a high content of glass fiber is suitable for filling various materials such as automotive bodies, cast iron castings, laminate, wood, and many other materials. HAVELfiller G easily replaces missing parts of the material
Kč746.69
HAVEL filler P - bal 2 kg

HAVEL filler P - bal 2 kg

eshop_800021
Polyester two-component filler with an extended processing time is suitable for filling large parts and large surfaces. HAVELfiller P has excellent adhesion to various surfaces including galvanized steel, is thinner and shapes well. The filler is easy to apply and works excellently
Kč1,427.50
HAVEL filler SFP - bal. 1,8kg

HAVEL filler SFP - bal. 1,8kg

eshop_800011
Polyester two-component filler recommended especially where extremely good sandability is required. HAVELfiller SFP is suitable for most common substrates including cast iron, aluminum, and laminates. The filler is medium dense, pore-free, and shapes very well. P
Kč995.59
HAVEL filler SP - fine finishing two-component filler -...

HAVEL filler SP - fine finishing two-component filler - pack. 2 kg

eshop_800018
Polyester two-component fine filler for finishing small imperfections, grooves, and pores on automotive bodies or other metal parts, cast iron castings, and machine surfaces. HAVELfiller SP has excellent adhesion, is very thick, and shapes well.
Kč1,480.94
HAVEL filler U - bal. 1kg

HAVEL filler U - bal. 1kg

eshop_800005
Universal polyester two-component filler suitable for filling common substrates including cast iron, aluminum, and fiberglass. HAVELfiller U is a thick, very well moldable filler that sands well, is pore-free, and is suitable as a universal filling compound. For
Kč587.40
Havel Wax 60-x3, 450g

Havel Wax 60-x3, 450g

eshop_900137
Universal release wax agent in paste form for processing polyester and epoxy\nresins.\nSuitable for models, new tools, and continuous production.\nAllows multiple demolding on established tools at temperatures up to 140°C.
Kč821.36
HAVELex 1

HAVELex 1

eshop_002042/2
New special filler that increases viscosity similarly to Aerosil, but smoothly and similarly to microballoons reduces the bulk density of the resin. Due to the fact that the filler is made from a special plastic, it has significantly greater p when mixed with the resin.
Kč3,733.46
HAVELfiller E - elastic white polyester two-component...

HAVELfiller E - elastic white polyester two-component filler, 1kg

eshop_800013/a
Elastic extra white polyester two-component filler for filling common substrates including cast iron, aluminum, zinc, and fiberglass. HAVELfiller E is pore-free, elastic, suitable as both a filling and top filler, which sands well. For curing, use red
Kč564.70
IMPASOL - ORANGE (residue-free)

IMPASOL - ORANGE (residue-free)

eshop_900160
Fast degreasing and cleaning liquid for industry and engineering IMPASOL® ORANGE is a combination of two excellent degreasing liquids into one absolutely unique FAST SAFE DEGREASER. Its advantage lies in the microemulsion content of natural terpenes (with
Kč592.96
Lightweight Microballoons

Lightweight Microballoons

eshop_002044
Suitable for thickening all resins. Used wherever it is necessary to apply resin in larger quantities so that it does not run. Microballoons are miniature glass hollow spheres that increase the volume of resins without significantly affecting their h
Kč541.72
Microcellulose powder - white

Microcellulose powder - white

eshop_002041
Suitable for thickening all resins. It is used wherever it is necessary to apply resin in larger quantities so that it does not run. It thickens by adding a smaller amount of filler. Due to its low price, it is among the popular fillers. It can also be successfully mixed
Kč218.88
PVA Brush Width 45 mm

PVA Brush Width 45 mm

eshop_002025
Working part made of foam moltopren. Suitable for manual applications. Replacement working moltopren part can be ordered.
Kč155.78
PVA Separator - Coating R+G

PVA Separator - Coating R+G

eshop_002024
Separator for epoxy, vinylester, and polyester resins up to max. 100°C. To create a primary layer, use a release wax beforehand. Application can be done, for example, with a brush for applying PVA (item no. 165 110). After drying, a shiny, strong finish can be seen.
Kč609.07
PVA Separator - ECO (per 1l)

PVA Separator - ECO (per 1l)

eshop_002023/2
PVA Separator - ECO is a liquid product that prevents two materials from sticking together. It is primarily used for separating products from composite and metal molds. PVA Separator is also suitable to combine with a release base wax, which is used as
Kč277.81
PVA Separator - ECO Blue (per 1l)

PVA Separator - ECO Blue (per 1l)

eshop_002023/3
PVA Separator - ECO is a liquid product that prevents two materials from sticking together. It is primarily used for separating products from composite and metal molds. PVA Separator is also suitable for combining with a release base wax, which is used as a
Kč265.73
Separation Base Wax

Separation Base Wax

eshop_002028
Highly effective base wax for base surfaces that are not easily wettable, e.g. laminate molds, silicone, and some metals. When using GRP molds, the base wax improves the wettability of the top surface. The separator itself can then be more easily evenly
Kč529.27
Separation Wax TR 104 397g

Separation Wax TR 104 397g

eshop_002034
High-quality wax-based separator, tested in our operations. The package contains 397g. Separator TR 104 can be replaced by separator TR 216. The separator is also suitable for higher temperatures. Separator TR is not suitable as a base layer under PVA, it causes eye
Kč809.28
Separator - FREWAX

Separator - FREWAX

eshop_900043
Frewax is a separator made from wax and polymer separation agents. This combination offers users the advantages of an easily spreadable wax and a reusable semi-permanent separator. The product must be shaken continuously before and during use.
Kč1,953.11
Separator MAT ultra 41-90

Separator MAT ultra 41-90

eshop_100020/1
Separator MAT ultra 41-90 is a highly release semi-permanent separator that gives the demolded part a matte surface.\n\nApply 4-5 layers without polishing on a clean polished mold. Dry for 15 minutes between layers and then 30 minutes for complete curing.&n
Kč2,876.96
Separator QV 5110 - Vantico

Separator QV 5110 - Vantico

eshop_002032
Pasty separator based on wax containing solvents for general model building (replaces separator QZ 10). Apply the separator with a brush or cloth in a thin layer on the surface of the mold. Once the separator dries (approximately after 30 min.), polish the mold with a soft cloth.
Kč1,619.29
Separator QZ 5111 - Vantico, 0.7 kg, 3.75 kg

Separator QZ 5111 - Vantico, 0.7 kg, 3.75 kg

eshop_002031
Liquid separator based on wax containing solvents for general model building (replaces separator QZ 11). It is applied using a brush or spray gun two to three times at intervals of 10-15 minutes, allowed to dry, and always polished with a soft cloth.
Kč1,592.21
Separator RA-57

Separator RA-57

eshop_900533
Separator RA-57 is a multipurpose, liquid external release agent, based on solvents with a short drying time. The use of this product eliminates the need for repeated waxing and polishing.\nSeparator RA-57 forms a monomolecular film that adheres to the mold and
Kč1,110.37
Standard Microballoons

Standard Microballoons

eshop_002043
Suitable for thickening all resins. It is used wherever it is necessary to apply resin in larger quantities so that it does not run. Microballoons are miniature hollow glass spheres that increase the volume of resins without significantly affecting their properties.
Kč541.72
Styrene for thinning polyester resins and gelcoats

Styrene for thinning polyester resins and gelcoats

eshop_000019
Styrene is one of the basic raw materials used in the production of polyester, vinylester resins, and gelcoats. It is used independently as a thinner for polyester and vinylester materials. In larger amounts, it can affect the quality and parameters of the cured
Kč245.97
Technical Acetone

Technical Acetone

eshop_010002
Very effective solvent for cleaning everything you used during laminating. It quickly dissolves polyester, epoxy, and most paints. It is very suitable for degreasing. When purchasing a 200 l drum, a refundable deposit of 1000 CZK/drum is charged for the metal drum.
Kč94.80
Thinner for SF30, T 30, T 35 - MGS

Thinner for SF30, T 30, T 35 - MGS

eshop_000014
Manufacturer-recommended thinner for adjusting the viscosity of MGS polyester gelcoats SF 30, T 30, T 35, and T 3 PU to achieve the best results.
Kč685.20
Titanium White

Titanium White

eshop_900002
Titanium White is suitable for coloring most types of resins. Before mixing it into the resin, we recommend mixing the white pigment in a small amount of resin to create a thicker paste, which can then be used to color the resin itself. Adding a larger amount
Kč107.61
View
Titanium White - sold by kg
  • -Kč398.43

Titanium White - sold by kg

900002
Titanium white is used for coloring polyester and epoxy resins. Recommended max. loading up to 15%. Larger amounts may significantly affect the mechanical properties of the cured resin.
Kč265.62 Kč664.05
Time left
Unidirectional Carbon Fiber 400 g/m2, 50 cm wide...

Unidirectional Carbon Fiber 400 g/m2, 50 cm wide connected with a grid

eshop_006050
Unidirectional carbon fibers 50K spread in width and connected with a grid. The material is suitable for the production of tubes, profiles, and other products that need to be reinforced longitudinally or also transversely.\nSuitable for most commonly used resins.
Kč899.25
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text