Home

3-piece pins for molds 5/8 mm (1 pack 3 pcs)

eshop_010141/1

Metal pins for precise positioning of multi-part molds. The advantage of these pins is that they can be removed from the metal insert in the parting line at any time and do not interfere during separation. Suitable in combination with bushings for mold clamping with screws.

Kč141.87

3M 7500 Half Mask Size L

eshop_010093/B

Proven and high-quality half mask that effectively protects you from hazardous organic vapor emissions. These vapors are released from most resins and paints used not only in the production of laminates, and therefore by using this half mask with the prescribed filters you can ch

Kč1,745.35

Acralock SA 10-05 BLK 50ml , 10:1

eshop_001099/24

advanced two-component methacrylate adhesives designed for the chemical bonding of most surfaces, creating strong joints and integrated assemblies from steel, aluminum, engineering plastics, modern composites, and other materials. Packaged directly in an application cartridge

Kč555.63

Activated Carbon MAC6D40

eshop_010118

Activated carbon is used as a filler for filters for air and water filtration. This material will ensure the filtration of contaminated air from your laminating or painting shop when used correctly.

Kč216.69

Adhesive Spray Infutac - 500 ml - clear

eshop_900237/1

Contact adhesive spray for temporary bonding of fabrics before saturation.\n\nINFUTAC is designed for the installation of dry reinforcements, etc. in vacuum, infusion, and RTM processes.\n\nBonding of hybrid materials\nOptimal adhesion during curing

Kč571.00

Adhesive spray Infutac - 500 ml - green

eshop_900237

Contact adhesive spray for temporary attachment of fabrics before impregnation.\n\nINFUTAC is designed for the installation of dry reinforcements, etc. in vacuum, infusion, and RTM processes.\n\nAttachment of hybrid materials\nOptimal adhesion during shaping

Kč614.92

Adhesive Spray RSB 139 - 500 ml - clear (alternative to Infutac)

eshop_010256/11

Contact adhesive spray for temporary bonding of fabric before impregnation.

Kč460.46

Adhesive Spray RSB 139 - 500 ml - green (alternative to Infutac)

eshop_010256/10

Contact adhesive spray for temporary bonding of fabric before saturation.

Kč460.46

Aerosil 200 - thixotropic filler for thickening resins

eshop_002042

Suitable for thickening all resins. It is used wherever it is necessary to keep the resin in a vertical position so that it does not drip. Caution: in larger volumes, overheating of the resin may occur, leading to subsequent defects. To improve mechanical properties, add

Kč499.26

Antique Brown RAL 8003 Pigment Paste

eshop_002015/2

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. The pigment paste is made by grinding the pigment with resin between rollers. Because the pigment is very well mixed, only a small amount is needed to color the resin

Kč2,677.84

Apyral - filler for polyester resins 2E

eshop_010379

Material suitable as a filler for polyester and epoxy resins. It reduces shrinkage during curing and suppresses the flammability of resin products. Can be filled up to 100:200 (Apiral 2E) at this filling, self-extinguishing properties are created. This material is from the waste

Kč258.12

ARALDIT 2000 Application Gun - 200 ML

eshop_010052/9

Gun for dispensing selected ARALDIT materials

Kč2,196.15

Battery scissors - E.C.CUTTER 2965.011.000

eshop_010177/1

Electric scissors suitable for cutting fabrics, paper, films, and other materials. These scissors can easily handle aramid fabric. Easy and precise work. The delivery of the scissors includes the scissors with a battery and a universal cutting attachment. Furthermore, it is in the edge

Kč6,368.84

Black pigment paste RAL 9005

eshop_002021/2

Kč1,258.61

Black Pigment Paste RAL 9127

eshop_002010/1a

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Up to 20% of the total resin volume. A larger amount may significantly affect the parameters of the cured resin. You can find more pigment pastes in the category

Kč873.04

BlueNylon Paint Roller 11-10cm, Blaufaden, core 17mm

eshop_500111

Blaufaden - 13 mm fiber, nylon, does not shed, for primer, anti-corrosive, epoxy and two-component paints and varnishes, holder diameter 6 mm.

Kč41.07

Bubble Wrap BULPACK

eshop_003007/2A

Bubble wrap is especially suitable for packaging your products. It protects your products primarily from impact.

Kč13.54

Bushings for precise mold clamping without threads (grooved) M6 - FIX -A - FORM (R+G)

eshop_010136/1

These special nuts connected by a screw through the bushing ensure easy and precise tightening of molds together and create a perfect joint. The nuts are positioned during the mold manufacturing process in the desired locations in the parting plane and are secured against pull-out with thin glass fibers.

Kč37.92

Cabosil M5 (bal.10kg)

eshop_002042/1

Silica-based material. Like Aerosil 200, it is used for thickening resins and paints. Or for thixotropic modifications of these materials. Original packaging 10kg in a paper bag. It can be combined with other fillers such as microballoons, cotton in

Kč567.34

Carbon chopped fibers 3mm

eshop_003020/6

Material suitable for mixing with polyester and epoxy resins. Together with the resin and possibly other suitable fillers such as microballoons, Cabosil can fill hard-to-reach areas, or it can be used to bond necessary parts in the laminate.

Kč2,875.20

Carbon Fiber Rod 4x1000 mm.

eshop_010121/4

Carbon rod with a diameter of 4 mm. It is made from carbon fibers and high-quality epoxy resin using pultrusion. (the technology of continuous pulling of saturated carbon fibers through an exact metal mold that is heated) For larger quantities, it is possible

Kč300.14

View

Carbon fiber rod diameter 3 mm, length 1000 mm

eshop_010211/10

Carbon fiber rod diameter 3 mm. It is made from carbon fibers and high-quality epoxy resin using pultrusion. (the technology of continuous drawing of saturated carbon fibers through an exact metal mold that is heated) For larger quantities, it is possible

Kč240.11

View

Carbon Powder - Ground Fiber

eshop_002071

Ground carbon fibers are a suitable filler for most resins. They are primarily used to enhance mechanical properties and also to ensure the dissipation of electrostatic charge.

Kč1,490.31

carbon tubes 10x8x1000 mm

eshop_010169/2

Carbon tubes made by pultrusion ensure relatively precise dimensions with small tolerance. They have a smooth surface both outside and inside.\nPultrusion is a technology in which pre-impregnated carbon or glass fibers are drawn through a heated metal mold and are

Kč567.70

carbon tubes 6x4x1000 mm

eshop_010130/3a

Carbon tubes manufactured by pultrusion ensure relatively precise dimensions with a small tolerance. They have a smooth surface both outside and inside. Pultrusion is a technology in which pre-impregnated carbon or glass fibers are drawn through a heated metal mold and js

Kč585.27

Clamp Valve for Infusions

eshop_900920

Screw valve for tightening input and output hoses, especially in vacuum infusion techniques for composite manufacturing. The valve is made of metal components and excels in durability and reusability. With proper handling, there is no contamination.

Kč1,225.45

Coating Roller RotaVelur 10cm/17mm

eshop_500231

Roller made of natural material - wool, thermal fusion

Kč36.31

Compressed Sponge

eshop_010324

An excellent helper for underwater sanding. Very absorbent sponge gentle on surfaces. Delivered in a compressed state and expands after soaking in water.

Kč104.68

Cotton Flakes

eshop_002048

Areas of use: production of lightweight, non-flowing adhesives, casting elements of molds and surfaces of structural molds using a mixture with 50% content of glass fiber cuttings and 50% content of cotton flakes. Volume data serves to assess the size of the supplied quantity.

Kč434.84

Cyan Blue Pigment Paste RAL 5010

eshop_002005

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Can be colored up to 20% of the resin volume. A larger amount may significantly affect the parameters of the cured resin.

Kč2,679.30

Dark Green RAL 6002 Pigment Paste

eshop_002075/2

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Recommended dosage up to 20%. Larger amounts may significantly affect the mechanical properties of the gelcoat or resin.

Kč2,986.76

Device for distilling contaminated acetone and other solvents 20L

eshop_900606

Small and handy device for distilling contaminated solvents with a capacity of 20L, consumption 1.2Kw/h, stainless steel design ATEX. Maintenance-free device with a payback period of 5-7 months. Devices for 50, 150, and 500 liters are also available. Delivery on order 10-14 days. Goods

Kč319,788.72

Distribution mesh OM 70 - 180g/m2 w.650mm - green

eshop_900282

Distribution mesh with high porosity allowing good airflow and resin flow, OM70 is recommended for vacuum or infusion technologies with polyester or epoxy.\n\nAvailable in INFUPLEX version (combined with perforated film) for easier

Kč113.32

Dove Blue Pigment Paste RAL 5014

eshop_002099/E

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats.

Kč1,429.69

Emfimastik PU 50 - adhesive - black (for flexible bonding of laminates) 300 ml

eshop_010062

Single-component flexible adhesive for bonding laminate parts and their joints. It flexibly bonds laminate, metal, some plastics, wood, and many other materials. A material that we use very often in our laminating shop and we have tested it. It is supplied in a cartridge.

Kč210.83

Filament 160 - polypropylene tape 20 mm, 160°C (roll 1000m)

eshop_900331

Thin polypropylene tape designed not only for the production of tubes and other profiles (binding materials to the mandrel), but also for repairs. Even though the tape is very thin, it can exert a great pressure on the product and thus squeeze out excess resin. We supply it in width

Kč889.44