Home

Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
CARBON, GLASS AND ARAMID ROWINGS
CARBON, GLASS AND ARAMID ROWINGS
FABRICS
FABRICS
TAPES AND BRAIDS
TAPES AND BRAIDS
PRE-PREGs
PRE-PREGs
NON-WOVEN FABRICS, FIBERGLASS MATS, FLEECE
NON-WOVEN FABRICS, FIBERGLASS MATS, FLEECE
SANDWICH MATERIALS
SANDWICH MATERIALS
Polyurethane foams
Polyurethane foams
SILICONES
SILICONES
RELEASE AGENTS AND FILLERS
RELEASE AGENTS AND FILLERS
Pigments for colouring
Pigments for colouring
Putties, Thinners
Putties, Thinners
AUXILIARY MATERIALS AND ACCESSORIES
AUXILIARY MATERIALS AND ACCESSORIES
Others
Others
Materials by Technology
Materials by Technology
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
Aerosil 200 - thixotropic filler for thickening resins

Aerosil 200 - thixotropic filler for thickening resins

eshop_002042
Suitable for thickening all resins. It is used wherever it is necessary to keep the resin in a vertical position so that it does not drip. Caution: in larger volumes, overheating of the resin may occur, leading to subsequent defects. To improve mechanical properties, add
Kč499.26
Airex C70.55 tl. 25 mm, 2450 x 1150 mm

Airex C70.55 tl. 25 mm, 2450 x 1150 mm

eshop_009075/4
Cured polyvinyl chloride foam for the production of sandwich structures. Sheet size: 2450x1150 mm. Suitable for laminating and bonding with polyester, vinylester, or epoxy. PVC foam coated with glass, aramid, carbon, or other fabric and cured
Kč1,636.20
Airex C70.90, tl. 10 mm, 2050 x 950 mm

Airex C70.90, tl. 10 mm, 2050 x 950 mm

eshop_009056/2
Cured polyvinyl chloride foam for the production of sandwich structures. Sheet size: 2050x950 mm. Suitable for laminating and bonding with polyester, vinylester, or epoxy. PVC foam coated with glass, aramid, carbon, or other fabric and cured
Kč1,944.69
AIREX C 70.90, tl. 1,2 mm. 1025x950 mm.

AIREX C 70.90, tl. 1,2 mm. 1025x950 mm.

eshop_009072/1
Cured polyvinyl chloride foam for the production of sandwich structures. Panel size: 2050x950 mm. Suitable for laminating and bonding with polyester, vinylester, or epoxy. PVC foam coated with glass, aramid, carbon, or other fabric cured p
Kč1,025.49
Airex C 70.90, tl. 25 mm , 2050x950 mm

Airex C 70.90, tl. 25 mm , 2050x950 mm

eshop_009091/101
Cured polyvinyl chloride foam for the production of sandwich structures. Sheet size: 2050x950 mm. Suitable for laminating and bonding with polyester, vinylester, or epoxy. PVC foam coated with glass, aramid, carbon, or other fabric and cured
Kč4,122.91
Airex C 71.75, tl. 5 mm. 1000x1420 mm.

Airex C 71.75, tl. 5 mm. 1000x1420 mm.

eshop_009007/4
Cured polyvinyl chloride foam for the production of sandwich structures with higher thermal resistance. Sheet size: 2150x1000 mm. Suitable for laminating and bonding with polyester, vinylester, or epoxy. PVC foam coated with glass, aramid, carbon, or
Kč743.03
Airex C70.48, tl. 6 mm , 1365x1270 mm

Airex C70.48, tl. 6 mm , 1365x1270 mm

eshop_900808
Cured polyvinyl chloride foam for the production of sandwich structures. Sheet size: 1365x1270 mm. Suitable for laminating and bonding with polyester, vinylester, or epoxy. PVC foam coated with glass, aramid, carbon, or other fabric and cured
Kč413.02
Airex C70.55, tl. 3 mm, 2450 x 1150 mm

Airex C70.55, tl. 3 mm, 2450 x 1150 mm

eshop_009076/h
AIREX® C70 is a polymer foam with closed cells that combines excellent strength and a favorable strength-to-weight ratio with high stiffness. It does not crumble, contains no freons, has negligible water absorption, and exhibits excellent resistance to chemicals.
Kč531.47
AIREX C70.55, thickness 15 mm, 2450 x 1150 mm

AIREX C70.55, thickness 15 mm, 2450 x 1150 mm

eshop_009091/16
AIREX® C70 is a polymer foam with closed cells that combines excellent strength and a favorable strength-to-weight ratio with high stiffness. It does not crumble, contains no freons, has negligible water absorption, and exhibits excellent resistance to chemicals.
Kč1,043.17
AIREX C70.55, thickness 2.0 mm, 2450 x 1150 mm

AIREX C70.55, thickness 2.0 mm, 2450 x 1150 mm

eshop_009075/a
AIREX® C70 is a polymer foam with closed cells that combines excellent strength and a favorable strength-to-weight ratio with high stiffness. It does not crumble, contains no freons, has negligible water absorption, and exhibits excellent resistance to chemicals.
Kč483.15
AIREX C70.55, thickness 6 mm, 2450 x 1150 mm

AIREX C70.55, thickness 6 mm, 2450 x 1150 mm

eshop_009206/20a
AIREX® C70 is a polymer foam with closed cells that combines excellent strength and a favorable strength-to-weight ratio with high stiffness. It does not crumble, contains no freons, has negligible water absorption, and exhibits excellent resistance to chemicals.
Kč591.86
Airex C70.55, tl. 10 mm, 2450 x 1150 mm

Airex C70.55, tl. 10 mm, 2450 x 1150 mm

eshop_009059/4
AIREX® C70 is a polymer foam with closed cells that combines excellent strength and a favorable strength-to-weight ratio with high stiffness. THE DIMENSIONS OF THE BOARD MAY VARY IN INDIVIDUAL BATCHES, IT IS ALWAYS SOLD IN WHOLE BOARDS OF ORIGINAL DIMENSIONS. Ned
Kč930.44
Airex C70.55, tl. 5 mm, 2450 x 1150

Airex C70.55, tl. 5 mm, 2450 x 1150

eshop_009058/1
AIREX® C70 is a polymer foam with closed cells that combines excellent strength and a favorable strength-to-weight ratio with high stiffness. It does not crumble, contains no freons, has negligible water absorption, and exhibits excellent chemical resistance.
Kč571.00
Airex C70.55, tl. 8 mm, 2450 x 1150

Airex C70.55, tl. 8 mm, 2450 x 1150

eshop_009020
AIREX® C70 is a polymer foam with closed cells that combines excellent strength and a favorable strength-to-weight ratio with high stiffness. It does not crumble, contains no freons, has negligible water absorption, and exhibits excellent resistance to chemicals.
Kč917.99
Airex C70.55, tl.4 mm 2450x1150 mm

Airex C70.55, tl.4 mm 2450x1150 mm

eshop_009081/2
AIREX® C70 is a polymer foam with closed cells that combines excellent strength and a favorable strength-to-weight ratio with high stiffness. It does not crumble, contains no freons, has negligible water absorption, and exhibits excellent resistance to chemicals.
Kč773.04
Airex C70.55,12mm 2450 x 1150mm

Airex C70.55,12mm 2450 x 1150mm

eshop_009090/24
AIREX® C70 is a polymer foam with closed cells that combines excellent strength and a favorable strength-to-weight ratio with high stiffness. THE DIMENSIONS OF THE BOARD MAY VARY IN INDIVIDUAL BATCHES, IT IS ALWAYS SOLD IN WHOLE BOARDS OF ORIGINAL DIMENSIONS. Not
Kč961.91
Airex C70.55., tl. 1,2 mm, 1225 x 1150mm

Airex C70.55., tl. 1,2 mm, 1225 x 1150mm

eshop_009000/1
AIREX® C70 is a polymer foam with closed cells that combines excellent strength and a favorable strength-to-weight ratio with high stiffness. It does not crumble, contains no freons, has negligible water absorption, and exhibits excellent resistance to chemicals.
Kč453.87
Airex C70.75, tl. 1,2 mm 2180 x 1020

Airex C70.75, tl. 1,2 mm 2180 x 1020

eshop_009001/1a
AIREX® C70 is a polymer foam with closed cells that combines excellent strength and a favorable strength-to-weight ratio with high stiffness. It does not crumble, contains no freons, has negligible water absorption, and exhibits excellent resistance to chemicals.
Kč567.34
Airex C70.75, tl. 10 mm, 2180 x 1020

Airex C70.75, tl. 10 mm, 2180 x 1020

eshop_009013/5
AIREX® C70 is a polymer foam with closed cells that combines excellent strength and a favorable strength-to-weight ratio with high stiffness. It does not crumble, contains no freons, has negligible water absorption, and exhibits excellent resistance to chemicals.
Kč1,401.14
Airex C70.75, tl. 12 mm, 2180 x 1020 mm

Airex C70.75, tl. 12 mm, 2180 x 1020 mm

eshop_009091/81a
AIREX® C70 is a polymer foam with closed cells that combines excellent strength and a favorable strength-to-weight ratio with high stiffness. It does not crumble, contains no freons, has negligible water absorption, and exhibits excellent resistance to chemicals.
Kč1,461.54
Airex C70.75, tl. 2 mm, 2180 x 1020 mm

Airex C70.75, tl. 2 mm, 2180 x 1020 mm

eshop_009206/84
AIREX® C70 is a polymer foam with closed cells that combines excellent strength and a favorable strength-to-weight ratio with high stiffness. It does not crumble, contains no freons, has negligible water absorption, and exhibits excellent resistance to chemicals.
Kč724.73
Airex C70.75, tl. 3 mm, 2180 x 1020

Airex C70.75, tl. 3 mm, 2180 x 1020

eshop_009004/4
AIREX® C70 is a polymer foam with closed cells that combines excellent strength and a favorable strength-to-weight ratio with high stiffness. It does not crumble, contains no freons, has negligible water absorption, and exhibits excellent resistance to chemicals.
Kč640.18
Airex C70.75, tl. 5 mm,1020 x 2180

Airex C70.75, tl. 5 mm,1020 x 2180

eshop_009206/3
AIREX® C70 is a polymer foam with closed cells that combines excellent strength and a favorable strength-to-weight ratio with high stiffness. It does not crumble, contains no freons, has negligible water absorption, and exhibits excellent resistance to chemicals.
Kč917.99
Airex C70.75, tl.20mm,2180 x 1020mm

Airex C70.75, tl.20mm,2180 x 1020mm

eshop_009075/8
AIREX® C70 is a polymer foam with closed cells that combines excellent strength and a favorable strength-to-weight ratio with high stiffness. It does not crumble, contains no freons, has negligible water absorption, and exhibits excellent resistance to chemicals.
Kč2,609.03
Airex C70.75, tl.6mm 1020 x 2180mm

Airex C70.75, tl.6mm 1020 x 2180mm

eshop_009089/1
AIREX® C70 is a polymer foam with closed cells that combines excellent strength and a favorable strength-to-weight ratio with high stiffness. It does not crumble, contains no freons, has negligible water absorption, and exhibits excellent resistance to chemicals.
Kč855.18
Airex C70.90, tl. 20 mm, 2050 x 950 mm

Airex C70.90, tl. 20 mm, 2050 x 950 mm

eshop_009091/18
Cured polyvinyl chloride foam for the production of sandwich structures. Sheet size: 2050x950 mm. Suitable for laminating and bonding with polyester, vinylester, or epoxy. PVC foam coated with glass, aramid, carbon, or other fabric and cured
Kč2,342.56
Airex C70.90, tl. 8 mm, 2050 x 950 mm

Airex C70.90, tl. 8 mm, 2050 x 950 mm

eshop_009056/1
Cured polyvinyl chloride foam for the production of sandwich structures. Sheet size: 2050x950 mm. Suitable for laminating and bonding with polyester, vinylester, or epoxy. PVC foam coated with glass, aramid, carbon, or other fabric and cured
Kč1,604.65
Airex C71.75, tl. 2 mm, 2150 x 1005 mm

Airex C71.75, tl. 2 mm, 2150 x 1005 mm

eshop_009005/7
AIREX® C71 is a polymer foam with closed cells specially formulated to maintain stability even at higher processing and operating temperatures. AIREX® C71 combines excellent strength and a favorable strength-to-weight ratio with high stiffness. No
Kč454.16
Airex C71.75, tl. 8 mm, 1420 x 1000 mm

Airex C71.75, tl. 8 mm, 1420 x 1000 mm

eshop_009011/1
Cured polyvinyl chloride foam for the production of sandwich structures with higher thermal resistance. Sheet size: 2150x1000 mm. Suitable for laminating and bonding with polyester, vinylester, or epoxy. PVC foam coated with glass, aramid, carbon, or
Kč882.85
Airex T90.100, tl. 10 mm, 2440 x 1220 mm - /CC/

Airex T90.100, tl. 10 mm, 2440 x 1220 mm - /CC/

eshop_009091/109a
AIREX® T90 is a thermoplastic and recyclable polymer foam with closed cells, featuring excellent properties in fire resistance, smoke generation, and toxicity (FST) ratings. It has very good mechanical properties and exceptional fatigue resistance, it is chemi
Kč631.32
Airex T90.100, tl. 12 mm, 2440 x 1220 mm

Airex T90.100, tl. 12 mm, 2440 x 1220 mm

eshop_009091/110
AIREX® T90 is a thermoplastic and recyclable polymer foam with closed cells that has excellent properties in fire resistance, smoke generation, and toxicity (FST) ratings. It has very good mechanical properties and exceptional fatigue resistance, it is chemi
Kč744.06
Airex T90.100, tl.20mm ,1220 x 2440mm

Airex T90.100, tl.20mm ,1220 x 2440mm

eshop_009206/15
AIREX® T90 is a thermoplastic and recyclable polymer foam with closed cells, featuring excellent properties in fire resistance, smoke generation, and toxicity (FST) ratings. It has very good mechanical properties and exceptional fatigue resistance, it is chemi
Kč1,143.14
Airex T90.60 , tl. 7 mm, 1220x2440 mm

Airex T90.60 , tl. 7 mm, 1220x2440 mm

eshop_009206/83
AIREX® T90 is a thermoplastic and recyclable polymer foam with closed cells that has excellent properties in fire resistance, smoke generation, and toxicity (FST) ratings. It has very good mechanical properties and exceptional fatigue resistance, it is chemi
Kč304.39
Airex T90.60, tl. 18 mm, 1220 x 2440 mm

Airex T90.60, tl. 18 mm, 1220 x 2440 mm

eshop_009206/85
AIREX® T90 is a thermoplastic and recyclable polymer foam with closed cells that has excellent properties in fire resistance, smoke generation, and toxicity (FST) ratings. It has very good mechanical properties and exceptional fatigue resistance, it is chemi
Kč924.43
Airex T90.60, tl. 30 mm, 1220 x 2440 mm

Airex T90.60, tl. 30 mm, 1220 x 2440 mm

eshop_009089/10
AIREX® T90 is a thermoplastic and recyclable polymer foam with closed cells, featuring excellent properties in fire resistance, smoke generation, and toxicity (FST) ratings. It has very good mechanical properties and exceptional fatigue resistance, it is chemi
Kč1,082.26
Airex T90.60, tl. 5 mm, 1220 x 2440 mm

Airex T90.60, tl. 5 mm, 1220 x 2440 mm

eshop_006206/58
AIREX® T90 is a thermoplastic and recyclable polymer foam with closed cells that has excellent properties in fire resistance, smoke generation, and toxicity (FST) ratings. It has very good mechanical properties and exceptional fatigue resistance, it is chemi
Kč401.34
Airex T90.60, tl. 6 mm, 1220 x 2440 mm

Airex T90.60, tl. 6 mm, 1220 x 2440 mm

eshop_009206/87
AIREX® T90 is a thermoplastic and recyclable polymer foam with closed cells that has excellent properties in fire resistance, smoke generation, and toxicity (FST) ratings. It has very good mechanical properties and exceptional fatigue resistance, it is chemi
Kč292.55
Airex T90.60,tl.10mm,1220 x 2440mm

Airex T90.60,tl.10mm,1220 x 2440mm

eshop_009206/42
AIREX® T90 is a thermoplastic and recyclable polymer foam with closed cells that has excellent properties in fire resistance, smoke generation, and toxicity (FST) ratings. It has very good mechanical properties and exceptional fatigue resistance, it is chemi
Kč475.16
Airex T90.60,tl.12mm,1220 x 2440mm

Airex T90.60,tl.12mm,1220 x 2440mm

eshop_009206/56
AIREX® T90 is a thermoplastic and recyclable polymer foam with closed cells that has excellent properties in fire resistance, smoke generation, and toxicity (FST) ratings. It has very good mechanical properties and exceptional fatigue resistance, it is chemi
Kč506.84
Airex T90.60,tl.20mm, 2440 x 1220 mm

Airex T90.60,tl.20mm, 2440 x 1220 mm

eshop_009076/2
AIREX® T90 is a thermoplastic and recyclable polymer foam with closed cells that has excellent properties in fire resistance, smoke generation, and toxicity (FST) ratings. It has very good mechanical properties and exceptional fatigue resistance, it is chemi
Kč811.70
Airex T90.60,tl.22mm,1220x2440mm

Airex T90.60,tl.22mm,1220x2440mm

eshop_009206/49a
AIREX® T90 is a thermoplastic and recyclable polymer foam with closed cells that has excellent properties in fire resistance, smoke generation, and toxicity (FST) ratings. It has very good mechanical properties and exceptional fatigue resistance, it is chemi
Kč901.89
Airex T90.60,tl.3mm,1220 x 1220mm

Airex T90.60,tl.3mm,1220 x 1220mm

eshop_009206/43
AIREX® T90 is a thermoplastic and recyclable polymer foam with closed cells that has excellent properties in fire resistance, smoke generation, and toxicity (FST) ratings. It has very good mechanical properties and exceptional fatigue resistance, it is chemi
Kč304.39
Airex T90.60,tl.8mm,1220 x 2440mm

Airex T90.60,tl.8mm,1220 x 2440mm

eshop_009017/2
AIREX® T90 is a thermoplastic and recyclable polymer foam with closed cells that has excellent properties in fire resistance, smoke generation, and toxicity (FST) ratings. It has very good mechanical properties and exceptional fatigue resistance, it is chemi
Kč412.61
AirexC70.55,tl.1,5 mm,1225x1150

AirexC70.55,tl.1,5 mm,1225x1150

eshop_009085
AIREX® C70 is a polymer foam with closed cells that combines excellent strength and a favorable strength-to-weight ratio with high stiffness. It does not crumble, contains no freons, has negligible water absorption, and exhibits excellent resistance to chemicals.
Kč431.18
Antique Brown RAL 8003 Pigment Paste

Antique Brown RAL 8003 Pigment Paste

eshop_002015/2
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. The pigment paste is made by grinding the pigment with resin between rollers. Because the pigment is very well mixed, only a small amount is needed to color the resin
Kč2,677.84
Apyral - filler for polyester resins 2E

Apyral - filler for polyester resins 2E

eshop_010379
Material suitable as a filler for polyester and epoxy resins. It reduces shrinkage during curing and suppresses the flammability of resin products. Can be filled up to 100:200 (Apiral 2E) at this filling, self-extinguishing properties are created. This material is from the waste
Kč258.12
Aramid Honeycomb 4 mm OX, 29 kg/m3, 1250 x 2500 mm, C2

Aramid Honeycomb 4 mm OX, 29 kg/m3, 1250 x 2500 mm, C2

eshop_009035/4
Hi-tech in the field of sandwich constructions. The truly lightest sandwich material in the world - a unique invention. It increases the construction height and thus the overall strength and stiffness of the product without a proportional increase in its weight relative to its strength. It is produced in various thicknesses,
Kč1,669.80
Aramid Honeycomb 5 mm. hexagonal 48 kg/m3

Aramid Honeycomb 5 mm. hexagonal 48 kg/m3

eshop_009069/5
HONEYCOMBS ARE SUPPLIED IN ORIGINAL DIMENSIONS OF ABOUT 2.5X1.2m. INDIVIDUAL BATCHES MAY VARY SLIGHTLY IN DIMENSIONS WITHIN TOLERANCE. WE ONLY SELL IN WHOLE PIECES.
Kč2,293.99
Aramid Honeycomb C1- 2mm OX 29kg/m3 1250x2500

Aramid Honeycomb C1- 2mm OX 29kg/m3 1250x2500

eshop_009037/3
Hi-tech in the field of sandwich constructions. The truly lightest sandwich material in the world - a unique invention. It increases the construction height and thus the overall strength and stiffness of the product without a proportional increase in weight relative to its strength. It is produced in various thicknesses,
Kč1,867.63
Aramid Honeycomb C2 - 3 mm OX 29 kg/m3, 1250 x 2500

Aramid Honeycomb C2 - 3 mm OX 29 kg/m3, 1250 x 2500

eshop_009036/4
Hi-tech in the field of sandwich constructions. The truly lightest sandwich material in the world - a unique invention. It increases the construction height and thus the overall strength and stiffness of the product without a proportional increase in its weight relative to strength. It is produced in various thicknesses,
Kč2,488.97
Aramid Honeycomb C2 - 4 mm OX 48 kg/m3, 1250 x 2500 mm

Aramid Honeycomb C2 - 4 mm OX 48 kg/m3, 1250 x 2500 mm

eshop_009041/2
Hi-tech in the field of sandwich constructions. The truly lightest sandwich material in the world - a unique invention. It increases the construction height and thus the overall strength and stiffness of the product without a proportional increase in weight relative to its strength. It is produced in various thicknesses,
Kč1,519.16
Aramid Honeycomb C2 - 6 mm OX 48 kg/m3, 2440 x 1250mm

Aramid Honeycomb C2 - 6 mm OX 48 kg/m3, 2440 x 1250mm

eshop_009038/2
Hi-tech in the field of sandwich constructions. The truly lightest sandwich material in the world - a unique invention. It increases the construction height and thus the overall strength and stiffness of the product without a proportional increase in weight relative to its strength. It is produced in various thicknesses,
Kč2,583.60
Aramid tape diagonal width 10 mm, 010.3726840-TB (1625) -...

Aramid tape diagonal width 10 mm, 010.3726840-TB (1625) - 3.36 g/bm

eshop_008103
Material specifically sewn for reinforcing the edges of laminated parts. It shapes well according to the shape of the substrate. Due to the diagonal weaving method, it is also suitable for very complex shapes. Finished edges Suitable for internal edges. Weight 3.36 g/bm
Kč33.60
Aramid tape diagonal width 20 mm, 020.26534840 (8698)-...

Aramid tape diagonal width 20 mm, 020.26534840 (8698)- 6.25 g/bm

eshop_008097
Aramid tape width 20 mm. Material directly sewn for reinforcing the edges of laminated parts. It shapes well according to the shape of the substrate. Due to the diagonal weaving method, it is also suitable for very complex shapes. Finished edges. Weight 6.25 g/bm
Kč65.23
Black Pigment Paste RAL 9127

Black Pigment Paste RAL 9127

eshop_002010/1a
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Up to 20% of the total resin volume. A larger amount may significantly affect the parameters of the cured resin. You can find more pigment pastes in the category
Kč873.04
Cabosil M5 (bal.10kg)

Cabosil M5 (bal.10kg)

eshop_002042/1
Silica-based material. Like Aerosil 200, it is used for thickening resins and paints. Or for thixotropic modifications of these materials. Original packaging 10kg in a paper bag. It can be combined with other fillers such as microballoons, cotton in
Kč567.34
Carbon chopped fibers 3mm

Carbon chopped fibers 3mm

eshop_003020/6
Material suitable for mixing with polyester and epoxy resins. Together with the resin and possibly other suitable fillers such as microballoons, Cabosil can fill hard-to-reach areas, or it can be used to bond necessary parts in the laminate.
Kč2,875.20
Carbon Powder - Ground Fiber

Carbon Powder - Ground Fiber

eshop_002071
Ground carbon fibers are a suitable filler for most resins. They are primarily used to enhance mechanical properties and also to ensure the dissipation of electrostatic charge.
Kč1,490.31
Carbon unidirectional tape TCU 125 width 50mm

Carbon unidirectional tape TCU 125 width 50mm

eshop_008059/2
Tape suitable for longitudinal reinforcement of composite products. 127 g/m2, fabric, number of fibers per cm2 warp x weft 5x4x2 used fiber in the warp 3K HR and in the weft EC9 34 tex ratio warp / weft 79/21, thickness 0.13 mm.
Kč103.22
Carbon unidirectional tape TCU 260 width 50 mm

Carbon unidirectional tape TCU 260 width 50 mm

eshop_008058
Tape suitable for longitudinal reinforcement of composite products. 255g/m2, fabric, number of fibers per cm2 warp x weft 5.7 x2x2 used fiber in the warp 6K HR and in the weft EC9 68 tex warp/weft ratio: 89/11, thickness 0.26 mm
Kč151.39
Carbon unidirectional tape TCU 260, width 100 mm

Carbon unidirectional tape TCU 260, width 100 mm

eshop_008135
Tape suitable for longitudinal reinforcement of composite products. 255g/m2, fabric, number of fibers per cm2 warp x weft 5.7 x2x2 used fiber in the warp 6K HR and in the weft EC9 68 tex warp/weft ratio: 89/11, thickness 0.26 mm.
Kč273.13
Cotton Flakes

Cotton Flakes

eshop_002048
Areas of use: production of lightweight, non-flowing adhesives, casting elements of molds and surfaces of structural molds using a mixture with 50% content of glass fiber cuttings and 50% content of cotton flakes. Volume data serves to assess the size of the supplied quantity.
Kč434.84
Cyan Blue Pigment Paste RAL 5010

Cyan Blue Pigment Paste RAL 5010

eshop_002005
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Can be colored up to 20% of the resin volume. A larger amount may significantly affect the parameters of the cured resin.
Kč2,679.30
Dark Green RAL 6002 Pigment Paste

Dark Green RAL 6002 Pigment Paste

eshop_002075/2
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Recommended dosage up to 20%. Larger amounts may significantly affect the mechanical properties of the gelcoat or resin.
Kč2,986.76
FMS - pore filler

FMS - pore filler

eshop_002029/1
FMS is a pore filler for molds. It is suitable for filling the pores of molds (FMS) for molds made of fiberglass-reinforced polyester, epoxy, and other resins. It is used to fill the pores in both new molds and older molds with microporous areas and shallow surfaces.
Kč3,197.59
Formula Five - release wax-1pc -340g

Formula Five - release wax-1pc -340g

eshop_002046
FORMULA FIVE- release wax for general use, which mixes carnauba wax - the most durable protection in nature - with modern polymers and hydrocarbon waxes. Silicone is added for easy application and facilitates multiple releases
Kč603.94
Frekote 700 NC - separator

Frekote 700 NC - separator

eshop_002030
Semi-permanent polymer separator for multiple use for separating all thermosets and most moldable polymers. Ensures high slip where problematic mold geometry complicates polymer processing. 700-NC cures at normal
Kč1,677.13
Frekote B 15 - base separator

Frekote B 15 - base separator

eshop_002029
The pore filler fills the micropores of molds and fills in fine scratches on their surface. When used together with other Frekote products, B-15 acts as an excellent base layer that enhances the provided separation capabilities. It is applied with a thin even layer.
Kč5,124.35
Frekote NC 770 - separator

Frekote NC 770 - separator

eshop_002055/2
Frekote separator 770-NC is a universal release agent with high slip suitable for cases where there are problems with mold geometry. It cures quickly at room temperature and creates a glossy surface on the castings. It is applied to a clean mold surface by spraying, sh
Kč1,740.81
Glass Fiber Filler 0.2 mm

Glass Fiber Filler 0.2 mm

eshop_002050
Very fine filler for epoxy and polyester resins. Its advantage is the very fine grain size of 0.2mm, which, together with the use of clean glass fibers without impurities, gives the material exceptional properties. By adding this filler to the resin, you will improve
Kč467.05
Glass flour (gray)

Glass flour (gray)

eshop_002069
Suitable as a filler for resins and for many other applications
Kč76.87
Glass Sleeve 080.1444420300-S 80 mm

Glass Sleeve 080.1444420300-S 80 mm

eshop_008017/1
Diameter 80 mm. with fiber orientation at an angle of 45°.\nWeight 43.83 g/m. Suitable for pipes with a diameter of 20-95 mm.
Kč62.42
Glass Sleeve 100.14466223136 - S

Glass Sleeve 100.14466223136 - S

eshop_400057
Diameter 100 mm. with fiber orientation at an angle of 45 degrees. Weight 59.95 g/lm. Suitable for pipes with a diameter of 20-120 mm.
Kč66.03
Glass tape width 30 mm, 030.265262136-SB (2729) - 19.21 g/bm

Glass tape width 30 mm, 030.265262136-SB (2729) - 19.21 g/bm

eshop_008035
Material specifically sewn for reinforcing the edges of laminated parts. It shapes well according to the shape of the substrate. Due to the diagonal weaving method, it is also suitable for very complex shapes. Finished edges.
Kč33.02
Graphite Black Pigment Paste RAL 9011

Graphite Black Pigment Paste RAL 9011

eshop_002010/1
The pigment paste is made by grinding pigment with resin between rollers. Because the pigment is very well mixed, often only a very small amount of pigment paste is needed to color the resin or gelcoat. To color thin layers of gelcoats, it is necessary
Kč1,441.04
View
Gravel Grey RAL 7032 Pigment Paste

Gravel Grey RAL 7032 Pigment Paste

eshop_002011/1
The pigment paste is made by grinding pigment with resin between rollers. Because the pigment is very well mixed, often only a very small amount of pigment paste is needed to color the resin or gelcoat. To color thin layers of gelcoats, it is necessary
Kč1,603.19
Green Pigment Paste RAL 6001

Green Pigment Paste RAL 6001

eshop_002017
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Can be colored up to 20% of the resin volume. A larger amount may significantly affect the parameters of the cured resin.
Kč2,904.77
Havel Wax 60-x3, 450g

Havel Wax 60-x3, 450g

eshop_900137
Universal release wax agent in paste form for processing polyester and epoxy\nresins.\nSuitable for models, new tools, and continuous production.\nAllows multiple demolding on established tools at temperatures up to 140°C.
Kč821.36
HAVELcore soft, thickness 2mm, width 1000mm (1722)

HAVELcore soft, thickness 2mm, width 1000mm (1722)

eshop_800000
Havelcore is a sandwich material similar to Coremat XX, but it is more pliable and shapes better. Its price is very attractive. Material: Polyester fibers and expanded microbeads. Havelcore 2 mm has a surface weight of 40-50 g/m2 and its thickness varies
Kč184.48
HAVELcore soft, thickness 4mm, width 1000mm (1724)

HAVELcore soft, thickness 4mm, width 1000mm (1724)

eshop_800002
Havelcore is a sandwich material similar to Coremat XX, but it is more pliable and shapes better. Its price is very attractive. Material: Polyester fibers and expanded microbeads. Havelcore 4 mm has a surface weight of 85-100 g/m2 and its thickness varies
Kč294.65
HAVELcore soft, thickness 5mm, width 1000mm (1725)

HAVELcore soft, thickness 5mm, width 1000mm (1725)

eshop_800003
Havelcore is a sandwich material similar to Coremat XX, but it is more flexible and shapes better. Its price is very interesting. Material: Polyester fibers and expanded microbeads. Havelcore 4 mm has a surface weight of 85-100 g/m2 and its thickness varies
Kč289.89
HAVELex 1

HAVELex 1

eshop_002042/2
New special filler that increases viscosity similarly to Aerosil, but smoothly and similarly to microballoons reduces the bulk density of the resin. Due to the fact that the filler is made from a special plastic, it has significantly greater p when mixed with the resin.
Kč3,733.46
Heavenly Blue Pigment Paste RAL 5015

Heavenly Blue Pigment Paste RAL 5015

eshop_002004
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Can be colored up to 20% of the resin volume. A larger amount may significantly affect the parameters of the cured resin.
Kč2,258.01
Herex C71.75, tl. 9 mm, 2150 x 1000

Herex C71.75, tl. 9 mm, 2150 x 1000

eshop_009052/6
Cured polyvinyl chloride foam for the production of sandwich structures with higher thermal resistance. Sheet size: 2150x1000 mm. Suitable for laminating and bonding with polyester, vinylester, or epoxy. PVC foam coated with glass, aramid, carbon, or
Kč920.19
Light Blue Pigment Paste RAL 5012

Light Blue Pigment Paste RAL 5012

eshop_002007
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. The pigment paste is made by grinding the pigment with resin between rollers. Because the pigment is very well mixed, only a small amount is needed to color the resin
Kč2,242.27
Lightweight Microballoons

Lightweight Microballoons

eshop_002044
Suitable for thickening all resins. Used wherever it is necessary to apply resin in larger quantities so that it does not run. Microballoons are miniature glass hollow spheres that increase the volume of resins without significantly affecting their h
Kč541.72
Microcellulose powder - white

Microcellulose powder - white

eshop_002041
Suitable for thickening all resins. It is used wherever it is necessary to apply resin in larger quantities so that it does not run. It thickens by adding a smaller amount of filler. Due to its low price, it is among the popular fillers. It can also be successfully mixed
Kč218.88
Moss Green Pigment Paste RAL 6005

Moss Green Pigment Paste RAL 6005

eshop_002067/1
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. The pigment paste is made by grinding the pigment with resin between rollers. Because the pigment is very well mixed, only a small amount is needed to color the resin
Kč2,791.31
MYCELL 60 M tl. 1,2mm, 1225x1150 mm (70.55)

MYCELL 60 M tl. 1,2mm, 1225x1150 mm (70.55)

eshop_900972/3
Sandwich foam board made of PVC foam, the surface is composed of open cells. Suitable for hand laminating, vacuuming, prepreg.\n\nBy using a core, you create a sandwich structure in the product, which significantly increases the stiffness of the product with minimal increase in weight.
Kč478.83
MYCELL 60 M tl. 1,5mm, 1225x1150mm (70.55)

MYCELL 60 M tl. 1,5mm, 1225x1150mm (70.55)

eshop_900972/4
Sandwich foam board made of PVC foam, the surface is made of open cells. Suitable for hand laminating, vacuuming, prepreg.\n\nBy using a core, you create a sandwich structure in the product that significantly increases the stiffness of the product with minimal increase in weight.
Kč397.14
MYCELL 60 M tl. 2 mm, 1225x1150mm (70.55)

MYCELL 60 M tl. 2 mm, 1225x1150mm (70.55)

eshop_900972/5
Sandwich foam board made of PVC foam, the surface is made of open bubbles. Suitable for hand laminating, vacuuming, prepreg.\n\nBy using a core, you create a sandwich structure in the product that significantly increases the stiffness of the product with minimal increase in weight.
Kč397.14
MYCELL 80 M tl.1,2mm, 1090x1020mm(70.75)

MYCELL 80 M tl.1,2mm, 1090x1020mm(70.75)

eshop_900972/6
Sandwich foam board made of PVC foam, the surface is formed by open bubbles. Suitable for hand laminating, vacuuming, prepreg.\n\nBy using a core, you create a sandwich structure in the product, which significantly increases the stiffness of the product with minimal increase in weight.
Kč698.96
Orange Pigment Paste RAL 2004

Orange Pigment Paste RAL 2004

eshop_002009
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Can be colored up to 20% of the resin volume. A larger amount may significantly affect the parameters of the cured resin.
Kč3,151.80
Parabeam thickness 3 mm, 780 g/m2, width 127 cm(Paraglas)

Parabeam thickness 3 mm, 780 g/m2, width 127 cm(Paraglas)

eshop_009021/a
Three-dimensional glass fabric consisting of two layers of fabric bonded by special fibers. After impregnation, these special fibers are tensioned and create beams between the bottom and top layers, thus forming a sandwich structure.
Kč767.77
Parabeam thickness 5 mm, 840 g/m2, width 127 cm(Paraglas)

Parabeam thickness 5 mm, 840 g/m2, width 127 cm(Paraglas)

eshop_009023/5
Three-dimensional glass fabric consisting of two layers of fabric bonded by special fibers. After impregnation, these special fibers are tensioned and create beams between the bottom and top layers, thus forming a sandwich structure.
Kč929.41
Parabeam thickness 6 mm, 905g/m2, width 127 cm(Paratank)

Parabeam thickness 6 mm, 905g/m2, width 127 cm(Paratank)

eshop_009022/a
Three-dimensional glass fabric, which consists of two layers of fabric connected by special fibers. After impregnation, these special fibers are tensioned and create beams between the bottom and top layers, thus forming a sandwich structure. PARATANK is internally formed by a channel
Kč1,082.70
Parabeam thickness 8 mm, 930 g/m2, width 127 cm(Paraglas)

Parabeam thickness 8 mm, 930 g/m2, width 127 cm(Paraglas)

eshop_009023/2
Three-dimensional glass fabric consisting of two layers of fabric bonded by special fibers. After impregnation, these special fibers are tensioned and create beams between the bottom and top layers, thus forming a sandwich structure.
Kč955.33
Pearlescent powder pigment for producing metallics -...

Pearlescent powder pigment for producing metallics - green - 299 Shimmer Green

eshop_002072/14
Fine pearlescent suitable for the production of paints and also as a material in the cosmetics industry. By mixing it into clear gelcoat, it creates a metallic design. The layer of clear gelcoat with pearlescent must be covered with a second color for a perfect effect. Other shades are also available.
Kč579.78
Pigment Paste Blue Violet RAL 4005

Pigment Paste Blue Violet RAL 4005

eshop_002080
The pigment paste is made by grinding pigment with resin between rollers. Because the pigment is very well mixed, often only a small amount of pigment paste is needed to color the resin or gelcoat. To color thin layers of gelcoats, it is necessary
Kč1,565.85
Pigment Paste Fiery Red RAL 3000

Pigment Paste Fiery Red RAL 3000

eshop_002003
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Can be colored up to 20% of the resin volume. Larger amounts may significantly affect the parameters of the cured resin.
Kč3,272.26
Pigment paste for polyesters - dark blue RAL 5004

Pigment paste for polyesters - dark blue RAL 5004

eshop_002006/1
The pigment paste is made by grinding pigment with resin between rollers. Because the pigment is very well mixed, often only a very small amount of pigment paste is needed to color the resin or gelcoat. To color thin layers of gelcoats, it is necessary
Kč1,625.15
Pigment paste for polyesters - dark purple RAL 4007

Pigment paste for polyesters - dark purple RAL 4007

eshop_002081
The pigment paste is made by grinding pigment with resin between rollers. Because the pigment is very well mixed, often only a very small amount of pigment paste is needed to color the resin or gelcoat. To color thin layers of gelcoats, it is necessary
Kč1,702.02
Pigment Paste for Polyesters - Olive Green RAL 6003

Pigment Paste for Polyesters - Olive Green RAL 6003

eshop_002067
The pigment paste is made by grinding pigment with resin between rollers. Because the pigment is very well mixed, often only a very small amount of pigment paste is needed to color the resin or gelcoat. To color thin layers of gelcoats, it is necessary
Kč1,317.69
View
Pigment Paste for Polyesters RAL 1007

Pigment Paste for Polyesters RAL 1007

eshop_002082
The pigment paste is made by grinding pigment with resin between rollers. Because the pigment is very well mixed, often only a small amount of pigment paste is needed to color the resin or gelcoat. To color thin layers of gelcoats, it is necessary
Kč2,723.23
Pigment Paste Green-Yellow RAL 6018

Pigment Paste Green-Yellow RAL 6018

eshop_002070
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. The pigment paste is made by grinding the pigment with resin between rollers. Because the pigment is very well mixed, only a small amount is needed to color the resin
Kč2,503.61
Pigment Paste Grey-Blue RAL 7031

Pigment Paste Grey-Blue RAL 7031

eshop_002011/2a
Pigments are suitable for coloring polyester, epoxy or polyurethane resins and gelcoats. The pigment paste is made by grinding the pigment with resin between rollers. Because the pigment is very well mixed, only a small amount is needed to color the resin
Kč2,223.97
Pigment Paste Grey-White RAL 9002

Pigment Paste Grey-White RAL 9002

eshop_002012
Pigments are suitable for coloring polyester, epoxy or polyurethane resins and gelcoats. The pigment paste is made by grinding the pigment with resin between rollers. Because the pigment is very well mixed, only a small amount is needed to color the resin
Kč1,951.65
Pigment paste ivory RAL 1014

Pigment paste ivory RAL 1014

eshop_002002/3
Can be colored up to 20% of the resin volume. A larger amount may significantly affect the parameters of the cured resin.
Kč1,339.65
Pigment Paste Light Grey 7035

Pigment Paste Light Grey 7035

eshop_002011/4
The pigment paste is made by grinding pigment with resin between rollers. Because the pigment is very well mixed, often only a very small amount of pigment paste is needed to color the resin or gelcoat. To color thin layers of gelcoats, it is necessary
Kč1,225.45
Pigment Paste Pastel Blue RAL 5024

Pigment Paste Pastel Blue RAL 5024

eshop_002006/2
The pigment paste is made by grinding pigment with resin between rollers. Because the pigment is very well mixed, often only a very small amount of pigment paste is needed to color the resin or gelcoat. To color thin layers of gelcoats, it is necessary
Kč1,976.54
View
Pigment Paste Red-Beige RAL 3012

Pigment Paste Red-Beige RAL 3012

eshop_002077
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. The pigment paste is made by grinding the pigment with resin between rollers. Because the pigment is very well mixed, only a small amount is needed to color the resin
Kč862.35
Pigment Paste Sand Yellow RAL 1002

Pigment Paste Sand Yellow RAL 1002

eshop_002099/1
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Recommended amount up to 20%. A larger amount may significantly affect the mechanical properties of the resin.
Kč1,471.42
Pigment paste signal blue RAL 5005

Pigment paste signal blue RAL 5005

eshop_002006
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Up to 20% of the total resin volume. A larger amount may significantly affect the parameters of the cured resin.
Kč2,789.11
Pigment Paste Signal Brown 8002

Pigment Paste Signal Brown 8002

eshop_002083
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. The pigment paste is made by grinding the pigment with resin between rollers. Because the pigment is very well mixed, only a small amount is needed to color the resin
Kč1,123.33
Pigment Paste Silver Grey RAL 7001

Pigment Paste Silver Grey RAL 7001

eshop_002011
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Can be colored up to 20% of the resin volume. A larger amount may significantly affect the parameters of the cured resin.
Kč1,974.34
Pigment Paste Traffic Red RAL 3020

Pigment Paste Traffic Red RAL 3020

eshop_002013
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Up to 20% of the total volume of resin. A larger amount may significantly affect the parameters of the cured resin.
Kč3,623.65
Purple heather pigment paste RAL 4003

Purple heather pigment paste RAL 4003

eshop_002079
The pigment paste is made by grinding pigment with resin between rollers. Because the pigment is very well mixed, often only a very small amount of pigment paste is needed to color the resin or gelcoat. To color thin layers of gelcoats, it is necessary
Kč1,633.94
PVA Brush Width 45 mm

PVA Brush Width 45 mm

eshop_002025
Working part made of foam moltopren. Suitable for manual applications. Replacement working moltopren part can be ordered.
Kč155.78
PVA Separator - Coating R+G

PVA Separator - Coating R+G

eshop_002024
Separator for epoxy, vinylester, and polyester resins up to max. 100°C. To create a primary layer, use a release wax beforehand. Application can be done, for example, with a brush for applying PVA (item no. 165 110). After drying, a shiny, strong finish can be seen.
Kč609.07
PVA Separator - ECO (per 1l)

PVA Separator - ECO (per 1l)

eshop_002023/2
PVA Separator - ECO is a liquid product that prevents two materials from sticking together. It is primarily used for separating products from composite and metal molds. PVA Separator is also suitable to combine with a release base wax, which is used as
Kč277.81
PVA Separator - ECO Blue (per 1l)

PVA Separator - ECO Blue (per 1l)

eshop_002023/3
PVA Separator - ECO is a liquid product that prevents two materials from sticking together. It is primarily used for separating products from composite and metal molds. PVA Separator is also suitable for combining with a release base wax, which is used as a
Kč265.73
Red pigment paste RAL 3005

Red pigment paste RAL 3005

eshop_002008
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Up to 20% of the total resin volume. A larger amount may significantly affect the parameters of the cured resin.
Kč2,269.36
Rohacell 51 IG-F 7mm 2500x1250 mm

Rohacell 51 IG-F 7mm 2500x1250 mm

eshop_009075/50
Hardened acrylic foam (polymethacrylimide) with excellent mechanical properties.\n\nIt is a structural foam that you can choose for the automotive industry, watercraft, and other industrial applications. In the medical technology market, ROHACELL
Kč1,429.69
Rohacell IG 110, 3 mm.

Rohacell IG 110, 3 mm.

eshop_009074/8
Hardened acrylic foam (polymethacrylimide) with excellent mechanical properties. Temperature resistance up to 180°C, white in color. Allows X-ray penetration. Resistant to certain types of chemicals. Sheet size 2160x1100 mm. Bulk density 110 kg/m2.
Kč8,623.55
Rohacell IG 31, 5 mm.

Rohacell IG 31, 5 mm.

eshop_009074/06
Hardened acrylic foam (polymethacrylimide) with excellent mechanical properties. Temperature resistance up to 180°C, white in color. Allows X-ray penetration. Resistant to certain types of chemicals. Sheet size 1250x625 mm. Bulk density 31 kg/m2. On the
Kč2,547.53
Separation Base Wax

Separation Base Wax

eshop_002028
Highly effective base wax for base surfaces that are not easily wettable, e.g. laminate molds, silicone, and some metals. When using GRP molds, the base wax improves the wettability of the top surface. The separator itself can then be more easily evenly
Kč529.27
Separation Wax TR 104 397g

Separation Wax TR 104 397g

eshop_002034
High-quality wax-based separator, tested in our operations. The package contains 397g. Separator TR 104 can be replaced by separator TR 216. The separator is also suitable for higher temperatures. Separator TR is not suitable as a base layer under PVA, it causes eye
Kč809.28
Separator - FREWAX

Separator - FREWAX

eshop_900043
Frewax is a separator made from wax and polymer separation agents. This combination offers users the advantages of an easily spreadable wax and a reusable semi-permanent separator. The product must be shaken continuously before and during use.
Kč1,953.11
Separator MAT ultra 41-90

Separator MAT ultra 41-90

eshop_100020/1
Separator MAT ultra 41-90 is a highly release semi-permanent separator that gives the demolded part a matte surface.\n\nApply 4-5 layers without polishing on a clean polished mold. Dry for 15 minutes between layers and then 30 minutes for complete curing.&n
Kč2,876.96
Separator QV 5110 - Vantico

Separator QV 5110 - Vantico

eshop_002032
Pasty separator based on wax containing solvents for general model building (replaces separator QZ 10). Apply the separator with a brush or cloth in a thin layer on the surface of the mold. Once the separator dries (approximately after 30 min.), polish the mold with a soft cloth.
Kč1,619.29
Separator QZ 5111 - Vantico, 0.7 kg, 3.75 kg

Separator QZ 5111 - Vantico, 0.7 kg, 3.75 kg

eshop_002031
Liquid separator based on wax containing solvents for general model building (replaces separator QZ 11). It is applied using a brush or spray gun two to three times at intervals of 10-15 minutes, allowed to dry, and always polished with a soft cloth.
Kč1,592.21
Separator RA-57

Separator RA-57

eshop_900533
Separator RA-57 is a multipurpose, liquid external release agent, based on solvents with a short drying time. The use of this product eliminates the need for repeated waxing and polishing.\nSeparator RA-57 forms a monomolecular film that adheres to the mold and
Kč1,110.37
Silk Grey Pigment Paste RAL 7044

Silk Grey Pigment Paste RAL 7044

eshop_002057
The pigment paste is made by grinding pigment with resin between rollers. Because the pigment is very well mixed, often only a very small amount of pigment paste is needed to color the resin or gelcoat. To color thin layers of gelcoats, it is necessary
Kč966.31
Soric SF 2mm, w. 127 cm

Soric SF 2mm, w. 127 cm

eshop_009066/13
Material similar in structure to Coremat XM, with individual cells formed by hexagons reinforced to prevent material deformation under pressure. There is also type XF-larger cells, LRC-maxi large cells, and type TF-very small cells available.
Kč362.36
View
Soric SF 3mm, w. 127 cm

Soric SF 3mm, w. 127 cm

eshop_009066/14
Material similar in structure to Coremat XM, with individual cells formed by hexagons reinforced to prevent material deformation under pressure. There is also type XF-larger cells, LRC-maxi large cells, and type TF-very small cells available.
Kč352.70
View
Spheretex SN 2 mm. 170g/m2

Spheretex SN 2 mm. 170g/m2

eshop_009025
Special unidirectional fabric for the production of sandwich structures.\nThe fibers of this fabric contain expanded microspheres that increase the structural thickness of the fabric. The material is impregnated with epoxy or polyester resin.
Kč448.38
Standard Microballoons

Standard Microballoons

eshop_002043
Suitable for thickening all resins. It is used wherever it is necessary to apply resin in larger quantities so that it does not run. Microballoons are miniature hollow glass spheres that increase the volume of resins without significantly affecting their properties.
Kč541.72
Stone Grey Pigment Paste RAL 7030

Stone Grey Pigment Paste RAL 7030

eshop_002056
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Up to 20% of the total resin volume. A larger amount may significantly affect the properties of the cured resin.
Kč2,110.50
Sulfur Yellow Pigment Paste RAL 1016 /1191/

Sulfur Yellow Pigment Paste RAL 1016 /1191/

eshop_002001
Pigments are suitable for coloring polyester, epoxy or polyurethane resins and gelcoats. Can be colored up to 20% of the resin volume. Larger amounts may significantly affect the parameters of the cured resin.
Kč2,305.96
TegraCore tl. 1 mm, 2500x590mm

TegraCore tl. 1 mm, 2500x590mm

eshop_900976
AIREX® TegraCore ™ is a closed-cell, extruded thermoplastic polymer foam that combines excellent flame retardant properties with low flammability, smoke, toxicity, and heat release rate, along with high temperature resistance and outstanding lightness
Kč2,441.39
TegraCore tl. 2 mm, 2500x590mm

TegraCore tl. 2 mm, 2500x590mm

eshop_900977
AIREX® TegraCore ™ is a closed, stretchable thermoplastic polymer foam that combines excellent flame retardant properties with low flammability, smoke, toxicity, and heat release rate, along with high temperature resistance and outstanding lightness
Kč2,653.68
TegraCore tl. 6 mm, 2500x590mm

TegraCore tl. 6 mm, 2500x590mm

eshop_900978
AIREX® TegraCore ™ is a closed, stretchable thermoplastic polymer foam that combines excellent flame retardant properties with low flammability, smoke, toxicity, and heat release rate, along with high temperature resistance and excellent lightness
Kč3,519.84
Titanium White

Titanium White

eshop_900002
Titanium White is suitable for coloring most types of resins. Before mixing it into the resin, we recommend mixing the white pigment in a small amount of resin to create a thicker paste, which can then be used to color the resin itself. Adding a larger amount
Kč107.61
View
Titanium White - sold by kg
  • -Kč398.43

Titanium White - sold by kg

900002
Titanium white is used for coloring polyester and epoxy resins. Recommended max. loading up to 15%. Larger amounts may significantly affect the mechanical properties of the cured resin.
Kč265.62 Kč664.05
Time left
Turquoise Blue Pigment Paste RAL 5018

Turquoise Blue Pigment Paste RAL 5018

eshop_002068
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. The pigment paste is made by grinding the pigment with resin between rollers. Because the pigment is very well mixed, only a small amount is needed to color the resin
Kč2,174.19
White Pigment Paste RAL 9010

White Pigment Paste RAL 9010

eshop_002000
Pigments are suitable for coloring polyester, epoxy or polyurethane resins and gelcoats. Can be colored up to 20% of the resin volume. Larger amounts may significantly affect the parameters of the cured resin.
Kč732.05
Yellow mustard pigment paste RAL 1021

Yellow mustard pigment paste RAL 1021

eshop_002002/2
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Can be colored up to 20% of the resin volume. Larger amounts may significantly affect the parameters of the cured resin.
Kč1,679.32
Yellow Pigment Paste RAL 1018

Yellow Pigment Paste RAL 1018

eshop_002002
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Can be colored up to 20% of the resin volume. A larger amount may significantly affect the parameters of the cured resin.
Kč1,656.63
Yellow Traffic Pigment Paste RAL 1023

Yellow Traffic Pigment Paste RAL 1023

eshop_002002/10
Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. The pigment paste is made by grinding the pigment with resin between rollers. Because the pigment is very well mixed, only a small amount is needed to color the resin
Kč4,084.84
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text