Home

5 Minute Epoxy Adhesive Component A

eshop_001041

Professional resin primarily for bonding not only composite parts. Very suitable for manufacturing operations where it is necessary to quickly bond or fix individual parts before the actual laminating. A popular helper for more complex and demanding repairs of damage

Kč595.89

5 Minute Epoxy Adhesive Component B

eshop_001042

Hardener for 5-minute epoxy adhesive /R+G/ component B Mixing ratio 1:1 Details can be found in the R+G Handbook p.91

Kč1,997.03

Accelerator D

eshop_000004/j

Designed for Havelpol 12 resin. Recommended dosage 0.5 - 1 g of accelerator per 100 g of resin.

Kč295.17

Benzylalkohol

eshop_001122

Kč269.03

Butanox M 50 peroxide for curing polyester resins

eshop_000023

The most commonly used version of butanox. Suitable for temperatures above 20 °C. Also available in a red-colored version for visual inspection

Kč434.84

Clear Epoxy Gelcoat EG 100-T - for thin layers

eshop_001045

This epoxy gelcoat can be applied solely by spraying. It can also be applied as a brush coating. The secret to smooth surfaces. It creates a smooth visible layer depending on the surface of the mold. The surface does not require any further treatment after being removed from the mold.

Kč1,142.00

Clear Polyester Gelcoat GS 100 S - Norpol GS Base - S

eshop_000015

The secret of smooth surfaces. Creates a smooth visible layer depending on the surface of the mold. The surface requires no further treatment after removal from the mold. You create the surface directly in the mold. Financial and effective savings. Pigments can be used for coloring

Kč363.83

Cobalt Accelerator for Curing Polyester and Vinyl Ester Resins 1 %

eshop_000026

Accelerates the curing process. Some resins are not pre-accelerated for various reasons. This accelerator allows you to accelerate them just before processing. The standard addition of the accelerator is 0.5-3% of the weight of the resin used. WARNING DO NOT MIX ACCELERATOR WITH CATALYST

Kč531.47

Crystic U 1131 T (ortho) self-extinguishing polyester resin for DIN 5510

eshop_900581

CRYSTIC U 1131 T is a filled, orthophthalic, non-accelerated thixotropic unsaturated polyester resin with low styrene content. It is suitable for fire-resistant/self-extinguishing laminates with reduced smoke generation. CRYSTIC U 1131 T is halogen-free and does not contain heavy

Kč140.55

Epodur 619-0600 component A

eshop_001068

New epoxy resin from Spolchemie developed for laminating.

Kč636.88

Epodur 619-0600 component B

eshop_001069

Colorless hardener, suitable for casting systems or laminating with a longer processing time: approx. 4 hours.\n\nRiver table. Mixing ratio epoxy:hardener=100:40 by weight. Maximum layer 2cm. Subsequent curing required min. 50°C for 3 hours!

Kč975.09

Eporezit - T600 (slower hardener)

eshop_610032

Characteristics: it is a liquid hardener for casting epoxy resins. solvent-free Not\ntoxic. It is a modified aliphatic polyamide with low exothermic reaction and long\nprocessing time, characterized by low viscosity. T-600

Kč1,223.99