Home

Epoxy and Polyester RESINS, HARDENERS AND GELCOATS

CARBON, GLASS AND ARAMID ROWINGS

FABRICS

TAPES AND BRAIDS

PRE-PREGs

NON-WOVEN FABRICS, FIBERGLASS MATS, FLEECE

SANDWICH MATERIALS

Polyurethane foams

SILICONES

RELEASE AGENTS AND FILLERS

Pigments for colouring

Putties, Thinners

AUXILIARY MATERIALS AND ACCESSORIES

Others

Materials by Technology

Epoxy and Polyester RESINS, HARDENERS AND GELCOATS

Showing 1-103 of 103 item(s)

Aerosil 200 - thixotropic filler for thickening resins

eshop_002042

Suitable for thickening all resins. It is used wherever it is necessary to keep the resin in a vertical position so that it does not drip. Caution: in larger volumes, overheating of the resin may occur, leading to subsequent defects. To improve mechanical properties, add

Kč499.26

Antique Brown RAL 8003 Pigment Paste

eshop_002015/2

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. The pigment paste is made by grinding the pigment with resin between rollers. Because the pigment is very well mixed, only a small amount is needed to color the resin

Kč2,677.84

Apyral - filler for polyester resins 2E

eshop_010379

Material suitable as a filler for polyester and epoxy resins. It reduces shrinkage during curing and suppresses the flammability of resin products. Can be filled up to 100:200 (Apiral 2E) at this filling, self-extinguishing properties are created. This material is from the waste

Kč258.12

Black pigment paste RAL 9005

eshop_002021/2

Kč1,258.61

Black Pigment Paste RAL 9127

eshop_002010/1a

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Up to 20% of the total resin volume. A larger amount may significantly affect the parameters of the cured resin. You can find more pigment pastes in the category

Kč873.04

Cabosil M5 (bal.10kg)

eshop_002042/1

Silica-based material. Like Aerosil 200, it is used for thickening resins and paints. Or for thixotropic modifications of these materials. Original packaging 10kg in a paper bag. It can be combined with other fillers such as microballoons, cotton in

Kč567.34

Carbon chopped fibers 3mm

eshop_003020/6

Material suitable for mixing with polyester and epoxy resins. Together with the resin and possibly other suitable fillers such as microballoons, Cabosil can fill hard-to-reach areas, or it can be used to bond necessary parts in the laminate.

Kč2,875.20

Carbon Powder - Ground Fiber

eshop_002071

Ground carbon fibers are a suitable filler for most resins. They are primarily used to enhance mechanical properties and also to ensure the dissipation of electrostatic charge.

Kč1,490.31

Cotton Flakes

eshop_002048

Areas of use: production of lightweight, non-flowing adhesives, casting elements of molds and surfaces of structural molds using a mixture with 50% content of glass fiber cuttings and 50% content of cotton flakes. Volume data serves to assess the size of the supplied quantity.

Kč434.84

Cyan Blue Pigment Paste RAL 5010

eshop_002005

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Can be colored up to 20% of the resin volume. A larger amount may significantly affect the parameters of the cured resin.

Kč2,679.30

Dark Green RAL 6002 Pigment Paste

eshop_002075/2

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Recommended dosage up to 20%. Larger amounts may significantly affect the mechanical properties of the gelcoat or resin.

Kč2,986.76

Dove Blue Pigment Paste RAL 5014

eshop_002099/E

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats.

Kč1,429.69

FMS - pore filler

eshop_002029/1

FMS is a pore filler for molds. It is suitable for filling the pores of molds (FMS) for molds made of fiberglass-reinforced polyester, epoxy, and other resins. It is used to fill the pores in both new molds and older molds with microporous areas and shallow surfaces.

Kč3,197.59

Formula Five - release wax-1pc -340g

eshop_002046

FORMULA FIVE- release wax for general use, which mixes carnauba wax - the most durable protection in nature - with modern polymers and hydrocarbon waxes. Silicone is added for easy application and facilitates multiple releases

Kč603.94

Frekote 700 NC - separator

eshop_002030

Semi-permanent polymer separator for multiple use for separating all thermosets and most moldable polymers. Ensures high slip where problematic mold geometry complicates polymer processing. 700-NC cures at normal

Kč1,677.13

Frekote B 15 - base separator

eshop_002029

The pore filler fills the micropores of molds and fills in fine scratches on their surface. When used together with other Frekote products, B-15 acts as an excellent base layer that enhances the provided separation capabilities. It is applied with a thin even layer.

Kč5,124.35

Frekote NC 770 - separator

eshop_002055/2

Frekote separator 770-NC is a universal release agent with high slip suitable for cases where there are problems with mold geometry. It cures quickly at room temperature and creates a glossy surface on the castings. It is applied to a clean mold surface by spraying, sh

Kč1,740.81

Glass chopped fibers 3 mm

eshop_002051

Suitable as a filler for resins and for many other applications.

Kč263.54

Glass Fiber Filler 0.2 mm

eshop_002050

Very fine filler for epoxy and polyester resins. Its advantage is the very fine grain size of 0.2mm, which, together with the use of clean glass fibers without impurities, gives the material exceptional properties. By adding this filler to the resin, you will improve

Kč467.05

Glass flour (gray)

eshop_002069

Suitable as a filler for resins and for many other applications

Kč76.87

Graphite Black Pigment Paste RAL 9011

eshop_002010/1

The pigment paste is made by grinding pigment with resin between rollers. Because the pigment is very well mixed, often only a very small amount of pigment paste is needed to color the resin or gelcoat. To color thin layers of gelcoats, it is necessary

Kč1,441.04

View

Gravel Grey RAL 7032 Pigment Paste

eshop_002011/1

Kč1,603.19

Green Pigment Paste RAL 6001

eshop_002017

Kč2,904.77

Ground glass fiber - powder (white)

eshop_002069/4

Suitable as a filler for resins and for many other applications

Kč261.34

Hardener for PUR 2K and 3K sl.B

eshop_010298/4

The hardener for PUR 2K 45 and 3K 90 is Isocyanate. Its description is part of the TL for PUR 2K 45 and PUR 3K 90 component A Properties of the hardener Density (20 °C) Isocyanate 1.240 g/cm3 Viscosity (25 °C) Isocyanate 240 cP/ mPa.s Weight ratio 100 Polyol 118 Isocyanate Volume

Kč510.24

Havel Wax 60-x3, 450g

eshop_900137

Universal release wax agent in paste form for processing polyester and epoxy\nresins.\nSuitable for models, new tools, and continuous production.\nAllows multiple demolding on established tools at temperatures up to 140°C.

Kč821.36

HAVELex 1

eshop_002042/2

New special filler that increases viscosity similarly to Aerosil, but smoothly and similarly to microballoons reduces the bulk density of the resin. Due to the fact that the filler is made from a special plastic, it has significantly greater p when mixed with the resin.

Kč3,733.46

Heavenly Blue Pigment Paste RAL 5015

eshop_002004

Kč2,258.01

Ipitherm G - 0 - 35 R - component A

eshop_000041/1

Two-component polyurethane system IPITHERM designated G-0-35R is a polyurethane-based foaming system suitable for foaming and filling hollow spaces. The mixing ratio is 100:135 (by weight). Use IPITHERM G-0-35R /component B/ as the hardener.

Kč446.92

Ipitherm G - 0 - 35 R - component B

eshop_000041/2

Two-component polyurethane system IPITHERM designated G-0-35R is a polyurethane-based foaming system suitable for foaming and filling hollow spaces. Mixing ratio 100:135 (by weight)\n\n \n\n \n\nIn 2020, the REAC regulation

Kč446.92

Light Blue Pigment Paste RAL 5012

eshop_002007

Kč2,242.27

Lightweight Microballoons

eshop_002044

Suitable for thickening all resins. Used wherever it is necessary to apply resin in larger quantities so that it does not run. Microballoons are miniature glass hollow spheres that increase the volume of resins without significantly affecting their h

Kč541.72

Microcellulose powder - white

eshop_002041

Suitable for thickening all resins. It is used wherever it is necessary to apply resin in larger quantities so that it does not run. It thickens by adding a smaller amount of filler. Due to its low price, it is among the popular fillers. It can also be successfully mixed

Kč218.88

Mold Polish - Oskar's M-100 Paste

eshop_002039

Polishing paste, packaging 1kg

Kč696.91

Moss Green Pigment Paste RAL 6005

eshop_002067/1

Kč2,791.31

Náhradní pěnový moltopren pro PVA štětec

eshop_002026

Replacement moltopren for PVA brush.

Kč57.39

Orange Pigment Paste RAL 2004

eshop_002009

Kč3,151.80

Pearl white pigment paste RAL 1013

eshop_002086

Kč1,262.79

Pearlescent powder pigment for producing metallics - brick - 502 Red Brown

eshop_002072/28

Fine pearlescent suitable for the production of paints also in the cosmetics industry. By mixing into clear gelcoat, it creates a metallic design. The layer of clear gelcoat with pearlescence must be covered with a second color for a perfect effect.

Kč708.62

Pearlescent powder pigment for producing metallics - green - 299 Shimmer Green

eshop_002072/14

Fine pearlescent suitable for the production of paints and also as a material in the cosmetics industry. By mixing it into clear gelcoat, it creates a metallic design. The layer of clear gelcoat with pearlescent must be covered with a second color for a perfect effect. Other shades are also available.

Kč579.78

Pearlescent powder pigment for the production of metallics - 424 Violet

eshop_002072/25

Kč579.78

Pearlescent powder pigment for the production of metallics - gold-green - 4701

eshop_002072/27

Kč579.78

Pearlescent powder pigment for the production of metallics - gray - purple - 404 Lilac

eshop_002072/20

Kč579.78

Pearlescent powder pigment for the production of metallics - pink - 403 Peach Blow

eshop_002072/19

Kč579.78

Pearlescent powder pigment for the production of metallics - pink - purple - 418 Rose Red

eshop_002072/24

Kč579.78

Pearlescent powder pigment for the production of metallics - red - pink - 415 Magic Red

eshop_002072/23

Kč579.78

Pigment paste anthracite gray RAL 7016

eshop_002088

Kč2,159.04

Pigment Paste Blue Violet RAL 4005

eshop_002080

The pigment paste is made by grinding pigment with resin between rollers. Because the pigment is very well mixed, often only a small amount of pigment paste is needed to color the resin or gelcoat. To color thin layers of gelcoats, it is necessary

Kč1,565.85

Pigment Paste Fiery Red RAL 3000

eshop_002003

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Can be colored up to 20% of the resin volume. Larger amounts may significantly affect the parameters of the cured resin.

Kč3,272.26

Pigment paste for polyesters - dark blue RAL 5004

eshop_002006/1

Kč1,625.15

Pigment paste for polyesters - dark purple RAL 4007

eshop_002081

Kč1,702.02

Pigment Paste for Polyesters - Olive Green RAL 6003

eshop_002067

Kč1,317.69

View

Pigment paste for polyesters - yellow RAL 1028

eshop_002002/1

Up to 20% of the total resin volume. A larger amount may significantly affect the parameters of the cured resin.

Kč1,713.00

View

Pigment Paste for Polyesters RAL 1007

eshop_002082

Kč2,723.23

Pigment paste for polyesters RAL 3003 ruby red

eshop_002003/1

Can be tinted up to 20% of the resin volume. Larger amounts may significantly affect the parameters of the cured resin.

Kč2,371.84

Pigment paste grass green RAL 6010

eshop_002070/2

Kč1,770.10

Pigment Paste Green-Yellow RAL 6018

eshop_002070

Kč2,503.61

Pigment Paste Grey-Blue RAL 7031

eshop_002011/2a

Pigments are suitable for coloring polyester, epoxy or polyurethane resins and gelcoats. The pigment paste is made by grinding the pigment with resin between rollers. Because the pigment is very well mixed, only a small amount is needed to color the resin

Kč2,223.97

Pigment Paste Grey-White RAL 9002

eshop_002012

Kč1,951.65

Pigment paste ivory RAL 1014

eshop_002002/3

Can be colored up to 20% of the resin volume. A larger amount may significantly affect the parameters of the cured resin.

Kč1,339.65

Pigment Paste Light Grey 7035

eshop_002011/4

Kč1,225.45

Pigment paste light pink RAL 3015

eshop_002080/1

Kč1,295.73

Pigment Paste Pastel Blue RAL 5024

eshop_002006/2

Kč1,976.54

View

Pigment Paste Red-Beige RAL 3012

eshop_002077

Kč862.35

Pigment Paste Sand Yellow RAL 1002

eshop_002099/1

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Recommended amount up to 20%. A larger amount may significantly affect the mechanical properties of the resin.

Kč1,471.42

Pigment paste signal blue RAL 5005

eshop_002006

Kč2,789.11

Pigment Paste Signal Brown 8002

eshop_002083

Kč1,123.33

Pigment paste signal white RAL 9003

eshop_002076

Can be tinted up to 10% of the resin volume. A larger amount may significantly affect the parameters of the cured resin.

Kč1,207.88

View

Pigment Paste Silver Grey RAL 7001

eshop_002011

Kč1,974.34

Pigment Paste Traffic Red RAL 3020

eshop_002013

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Up to 20% of the total volume of resin. A larger amount may significantly affect the parameters of the cured resin.

Kč3,623.65

Pigment Paste Water Blue RAL 5021

eshop_002004/1

Pigments are suitable for coloring polyester, epoxy or polyurethane resins and gelcoats.

Kč1,698.36

Polishing Paste Oskar´s M-50 (1kg)

eshop_002039/4

Coarser polishing paste for molds and products. One package contains 1L of paste.

Kč672.02

PUR 2K - 45 Polyurethane Foam sl.A

eshop_010298/2

Polyurethane foam for discontinuous production of parts and cast insulation with excellent dimensional stability. PUR 2K 45 is optionally self-extinguishing polyurethane foam intended generally for foaming into molds, whether metal, fiberglass, or wooden, i.e. for discontinuous

Kč375.18

PUR 3K - 90 Polyurethane Foam sl.A

eshop_010298/3

PUR 3K - 90 Polyurethane foam for discontinuous production of parts and cast insulation with excellent dimensional stability PUR 3K - 90 is optionally self-extinguishing polyurethane foam intended generally for foaming into molds, whether metal, fiberglass or wooden, i.e. for

Kč375.18

Purple heather pigment paste RAL 4003

eshop_002079

Kč1,633.94

PVA Brush Width 45 mm

eshop_002025

Working part made of foam moltopren. Suitable for manual applications. Replacement working moltopren part can be ordered.

Kč155.78

PVA Separator - Coating R+G

eshop_002024

Separator for epoxy, vinylester, and polyester resins up to max. 100°C. To create a primary layer, use a release wax beforehand. Application can be done, for example, with a brush for applying PVA (item no. 165 110). After drying, a shiny, strong finish can be seen.

Kč609.07

PVA Separator - ECO (per 1l)

eshop_002023/2

PVA Separator - ECO is a liquid product that prevents two materials from sticking together. It is primarily used for separating products from composite and metal molds. PVA Separator is also suitable to combine with a release base wax, which is used as

Kč277.81

PVA Separator - ECO Blue (per 1l)

eshop_002023/3

PVA Separator - ECO is a liquid product that prevents two materials from sticking together. It is primarily used for separating products from composite and metal molds. PVA Separator is also suitable for combining with a release base wax, which is used as a

Kč265.73

Red pigment paste RAL 3005

eshop_002008

Kč2,269.36

Sekaná skelná vlákna 6 mm

eshop_002053

Suitable as a filler for resins and for many other applications.

Kč206.15

Separation Base Wax

eshop_002028

Highly effective base wax for base surfaces that are not easily wettable, e.g. laminate molds, silicone, and some metals. When using GRP molds, the base wax improves the wettability of the top surface. The separator itself can then be more easily evenly

Kč529.27

Separation Wax Oskar's M-700/C

eshop_002038

Wax-based separator. 425gr. Also suitable as a base layer for PVA separator, PVA does not gel.

Kč889.44

Separation Wax TR 104 397g

eshop_002034

High-quality wax-based separator, tested in our operations. The package contains 397g. Separator TR 104 can be replaced by separator TR 216. The separator is also suitable for higher temperatures. Separator TR is not suitable as a base layer under PVA, it causes eye

Kč809.28

Separator - FREWAX

eshop_900043

Frewax is a separator made from wax and polymer separation agents. This combination offers users the advantages of an easily spreadable wax and a reusable semi-permanent separator. The product must be shaken continuously before and during use.

Kč1,953.11

Separator MAT ultra 41-90

eshop_100020/1

Separator MAT ultra 41-90 is a highly release semi-permanent separator that gives the demolded part a matte surface.\n\nApply 4-5 layers without polishing on a clean polished mold. Dry for 15 minutes between layers and then 30 minutes for complete curing.&n

Kč2,876.96

Separator QV 5110 - Vantico

eshop_002032

Pasty separator based on wax containing solvents for general model building (replaces separator QZ 10). Apply the separator with a brush or cloth in a thin layer on the surface of the mold. Once the separator dries (approximately after 30 min.), polish the mold with a soft cloth.

Kč1,619.29

Separator QZ 5111 - Vantico, 0.7 kg, 3.75 kg

eshop_002031

Liquid separator based on wax containing solvents for general model building (replaces separator QZ 11). It is applied using a brush or spray gun two to three times at intervals of 10-15 minutes, allowed to dry, and always polished with a soft cloth.

Kč1,592.21

Separator RA-57

eshop_900533

Separator RA-57 is a multipurpose, liquid external release agent, based on solvents with a short drying time. The use of this product eliminates the need for repeated waxing and polishing.\nSeparator RA-57 forms a monomolecular film that adheres to the mold and

Kč1,110.37

Silicone paper G 92g W 104 cm

eshop_900923/b

This auxiliary material is used as a separator in the production of prepregs.

Kč53.81

Silk Grey Pigment Paste RAL 7044

eshop_002057

Kč966.31

Standard Microballoons

eshop_002043

Suitable for thickening all resins. It is used wherever it is necessary to apply resin in larger quantities so that it does not run. Microballoons are miniature hollow glass spheres that increase the volume of resins without significantly affecting their properties.

Kč541.72

Stone Grey Pigment Paste RAL 7030

eshop_002056

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Up to 20% of the total resin volume. A larger amount may significantly affect the properties of the cured resin.

Kč2,110.50

Sulfur Yellow Pigment Paste RAL 1016 /1191/

eshop_002001

Pigments are suitable for coloring polyester, epoxy or polyurethane resins and gelcoats. Can be colored up to 20% of the resin volume. Larger amounts may significantly affect the parameters of the cured resin.

Kč2,305.96

Titanium White

eshop_900002

Titanium White is suitable for coloring most types of resins. Before mixing it into the resin, we recommend mixing the white pigment in a small amount of resin to create a thicker paste, which can then be used to color the resin itself. Adding a larger amount

Kč107.61

View

-Kč398.43

Titanium White - sold by kg

900002

Titanium white is used for coloring polyester and epoxy resins. Recommended max. loading up to 15%. Larger amounts may significantly affect the mechanical properties of the cured resin.

Kč265.62 Kč664.05

Time left

Turquoise Blue Pigment Paste RAL 5018

eshop_002068

Kč2,174.19

Vaseline for Pipe Production 238

eshop_010335

Vaseline suitable for pipe production.

Kč386.52