Home

5 Minute Epoxy Adhesive Component A

eshop_001041

Professional resin primarily for bonding not only composite parts. Very suitable for manufacturing operations where it is necessary to quickly bond or fix individual parts before the actual laminating. A popular helper for more complex and demanding repairs of damage

Kč595.89

5 Minute Epoxy Adhesive Component B

eshop_001042

Hardener for 5-minute epoxy adhesive /R+G/ component B Mixing ratio 1:1 Details can be found in the R+G Handbook p.91

Kč1,997.03

Accelerator D

eshop_000004/j

Designed for Havelpol 12 resin. Recommended dosage 0.5 - 1 g of accelerator per 100 g of resin.

Kč295.17

Benzylalkohol

eshop_001122

Kč269.03

Butanox M 50 peroxide for curing polyester resins

eshop_000023

The most commonly used version of butanox. Suitable for temperatures above 20 °C. Also available in a red-colored version for visual inspection

Kč434.84

Catalyst for HT 33

eshop_710125/c

Catalyst for liquid silicone resin for casting molds and products. It is a firmer form of silicone that is still very flexible and tear-resistant. Suitable for larger molds or for less shape-demanding molds and products. Also, it

Kč1,827.20

Catalyst for HT 45

eshop_710146/a

Liquid catalyst suitable for casting molds and products. Processing time 10 min. Demolding time 1:20 hours. Viscosity: 8,000 cPs. This type is very popular and achieves a Shore hardness of 45 after curing. Mixing ratio 1:1(

Kč1,581.23

Catalyst for ZA 13

eshop_710123/a

Catalyst for liquid silicone resin for casting molds and products. It is a very soft type of silicone that is still very flexible and tear-resistant. Suitable for smaller molds or for geometrically demanding molds and production.

Kč1,803.77

Catalyst for ZA 22

eshop_710124/b

Catalyst for blue silicone resin. Processing time 15 min. Demolding time 1 hour. Viscosity: 5.000 cPs. This type is very popular and achieves a Shore hardness of 22 after curing. Mixing ratio 1:1 (by weight) Silicone ZA 22 is a tre

Kč1,751.43

Clear Epoxy Gelcoat EG 100-T - for thin layers

eshop_001045

This epoxy gelcoat can be applied solely by spraying. It can also be applied as a brush coating. The secret to smooth surfaces. It creates a smooth visible layer depending on the surface of the mold. The surface does not require any further treatment after being removed from the mold.

Kč1,142.00

Clear Polyester Gelcoat GS 100 S - Norpol GS Base - S

eshop_000015

The secret of smooth surfaces. Creates a smooth visible layer depending on the surface of the mold. The surface requires no further treatment after removal from the mold. You create the surface directly in the mold. Financial and effective savings. Pigments can be used for coloring

Kč363.83

Cobalt Accelerator for Curing Polyester and Vinyl Ester Resins 1 %

eshop_000026

Accelerates the curing process. Some resins are not pre-accelerated for various reasons. This accelerator allows you to accelerate them just before processing. The standard addition of the accelerator is 0.5-3% of the weight of the resin used. WARNING DO NOT MIX ACCELERATOR WITH CATALYST

Kč531.47