Home

Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
CARBON, GLASS AND ARAMID ROWINGS
CARBON, GLASS AND ARAMID ROWINGS
FABRICS
FABRICS
TAPES AND BRAIDS
TAPES AND BRAIDS
PRE-PREGs
PRE-PREGs
NON-WOVEN FABRICS, FIBERGLASS MATS, FLEECE
NON-WOVEN FABRICS, FIBERGLASS MATS, FLEECE
SANDWICH MATERIALS
SANDWICH MATERIALS
Polyurethane foams
Polyurethane foams
SILICONES
SILICONES
RELEASE AGENTS AND FILLERS
RELEASE AGENTS AND FILLERS
Pigments for colouring
Pigments for colouring
Putties, Thinners
Putties, Thinners
AUXILIARY MATERIALS AND ACCESSORIES
AUXILIARY MATERIALS AND ACCESSORIES
Others
Others
Materials by Technology
Materials by Technology
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
Epoxy and Polyester RESINS, HARDENERS AND GELCOATS
Aramid tape diagonal width 10 mm, 010.3726840-TB (1625) -...

Aramid tape diagonal width 10 mm, 010.3726840-TB (1625) - 3.36 g/bm

eshop_008103
Material specifically sewn for reinforcing the edges of laminated parts. It shapes well according to the shape of the substrate. Due to the diagonal weaving method, it is also suitable for very complex shapes. Finished edges Suitable for internal edges. Weight 3.36 g/bm
Kč33.60
Aramid tape diagonal width 20 mm, 020.26534840 (8698)-...

Aramid tape diagonal width 20 mm, 020.26534840 (8698)- 6.25 g/bm

eshop_008097
Aramid tape width 20 mm. Material directly sewn for reinforcing the edges of laminated parts. It shapes well according to the shape of the substrate. Due to the diagonal weaving method, it is also suitable for very complex shapes. Finished edges. Weight 6.25 g/bm
Kč65.23
Carbon unidirectional tape TCU 125 width 50mm

Carbon unidirectional tape TCU 125 width 50mm

eshop_008059/2
Tape suitable for longitudinal reinforcement of composite products. 127 g/m2, fabric, number of fibers per cm2 warp x weft 5x4x2 used fiber in the warp 3K HR and in the weft EC9 34 tex ratio warp / weft 79/21, thickness 0.13 mm.
Kč103.22
Carbon unidirectional tape TCU 260 width 50 mm

Carbon unidirectional tape TCU 260 width 50 mm

eshop_008058
Tape suitable for longitudinal reinforcement of composite products. 255g/m2, fabric, number of fibers per cm2 warp x weft 5.7 x2x2 used fiber in the warp 6K HR and in the weft EC9 68 tex warp/weft ratio: 89/11, thickness 0.26 mm
Kč151.39
Carbon unidirectional tape TCU 260, width 100 mm

Carbon unidirectional tape TCU 260, width 100 mm

eshop_008135
Tape suitable for longitudinal reinforcement of composite products. 255g/m2, fabric, number of fibers per cm2 warp x weft 5.7 x2x2 used fiber in the warp 6K HR and in the weft EC9 68 tex warp/weft ratio: 89/11, thickness 0.26 mm.
Kč273.13
Glass Sleeve 080.1444420300-S 80 mm

Glass Sleeve 080.1444420300-S 80 mm

eshop_008017/1
Diameter 80 mm. with fiber orientation at an angle of 45°.\nWeight 43.83 g/m. Suitable for pipes with a diameter of 20-95 mm.
Kč62.42
Glass Sleeve 100.14466223136 - S

Glass Sleeve 100.14466223136 - S

eshop_400057
Diameter 100 mm. with fiber orientation at an angle of 45 degrees. Weight 59.95 g/lm. Suitable for pipes with a diameter of 20-120 mm.
Kč66.03
Glass tape width 30 mm, 030.265262136-SB (2729) - 19.21 g/bm

Glass tape width 30 mm, 030.265262136-SB (2729) - 19.21 g/bm

eshop_008035
Material specifically sewn for reinforcing the edges of laminated parts. It shapes well according to the shape of the substrate. Due to the diagonal weaving method, it is also suitable for very complex shapes. Finished edges.
Kč33.02
Hardener for PUR 2K and 3K sl.B

Hardener for PUR 2K and 3K sl.B

eshop_010298/4
The hardener for PUR 2K 45 and 3K 90 is Isocyanate. Its description is part of the TL for PUR 2K 45 and PUR 3K 90 component A Properties of the hardener Density (20 °C) Isocyanate 1.240 g/cm3 Viscosity (25 °C) Isocyanate 240 cP/ mPa.s Weight ratio 100 Polyol 118 Isocyanate Volume
Kč510.24
Ipitherm G - 0 - 35 R - component A

Ipitherm G - 0 - 35 R - component A

eshop_000041/1
Two-component polyurethane system IPITHERM designated G-0-35R is a polyurethane-based foaming system suitable for foaming and filling hollow spaces. The mixing ratio is 100:135 (by weight). Use IPITHERM G-0-35R /component B/ as the hardener.
Kč446.92
Ipitherm G - 0 - 35 R - component B

Ipitherm G - 0 - 35 R - component B

eshop_000041/2
Two-component polyurethane system IPITHERM designated G-0-35R is a polyurethane-based foaming system suitable for foaming and filling hollow spaces. Mixing ratio 100:135 (by weight)\n\n \n\n \n\nIn 2020, the REAC regulation
Kč446.92
PUR 2K - 45 Polyurethane Foam sl.A

PUR 2K - 45 Polyurethane Foam sl.A

eshop_010298/2
Polyurethane foam for discontinuous production of parts and cast insulation with excellent dimensional stability. PUR 2K 45 is optionally self-extinguishing polyurethane foam intended generally for foaming into molds, whether metal, fiberglass, or wooden, i.e. for discontinuous
Kč375.18
PUR 3K - 90 Polyurethane Foam sl.A

PUR 3K - 90 Polyurethane Foam sl.A

eshop_010298/3
PUR 3K - 90 Polyurethane foam for discontinuous production of parts and cast insulation with excellent dimensional stability PUR 3K - 90 is optionally self-extinguishing polyurethane foam intended generally for foaming into molds, whether metal, fiberglass or wooden, i.e. for
Kč375.18
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text