Materials and vacuum equipment

Adhesive Spray Infutac - 500 ml - clear

Adhesive Spray Infutac - 500 ml - clear

eshop_900237/1
Contact adhesive spray for temporary bonding of fabrics before saturation.\n\nINFUTAC is designed for the installation of dry reinforcements, etc. in vacuum, infusion, and RTM processes.\n\nBonding of hybrid materials\nOptimal adhesion during curing
Kč571.00
Adhesive spray Infutac - 500 ml - green

Adhesive spray Infutac - 500 ml - green

eshop_900237
Contact adhesive spray for temporary attachment of fabrics before impregnation.\n\nINFUTAC is designed for the installation of dry reinforcements, etc. in vacuum, infusion, and RTM processes.\n\nAttachment of hybrid materials\nOptimal adhesion during shaping
Kč614.92
Clamp Valve for Infusions

Clamp Valve for Infusions

eshop_900920
Screw valve for tightening input and output hoses, especially in vacuum infusion techniques for composite manufacturing. The valve is made of metal components and excels in durability and reusability. With proper handling, there is no contamination.
Kč1,225.45
Distribution mesh OM 70 - 180g/m2 w.650mm - green

Distribution mesh OM 70 - 180g/m2 w.650mm - green

eshop_900282
Distribution mesh with high porosity allowing good airflow and resin flow, OM70 is recommended for vacuum or infusion technologies with polyester or epoxy.\n\nAvailable in INFUPLEX version (combined with perforated film) for easier
Kč113.32
MTI-line membrane infusion hose (diameter 15/8mm)

MTI-line membrane infusion hose (diameter 15/8mm)

eshop_900871
MTI® stands for infusion using a membrane tube and describes a suction hose wrapped in a membrane for vacuum infusion.\nThe MTI® hose is an air-permeable and resin-blocking tube for evacuating air, allowing for easy use
Kč222.54
PE hose width 1000 mm thickness 0.05 sleeve

PE hose width 1000 mm thickness 0.05 sleeve

eshop_010144
Sleeve made of polyethylene film with a thickness of 0.05 mm. The width of the sleeve in the folded state is 1000 mm. Suitable for weaker vacuum up to 0.4 and vacuuming parts made of epoxy resins. Caution with polyesters and vinyl esters, please use a more resistant styrene film APA
Kč240.11
PE hose width 1000 mm thickness 0.10 sleeve

PE hose width 1000 mm thickness 0.10 sleeve

eshop_010145
Sleeve made from polyethylene film with a thickness of 0.1 mm. The width of the sleeve in its folded state is 1000 mm. Suitable for vacuum up to 0.9 and vacuuming parts made of epoxy resins. Be careful with polyesters and vinyl esters, please use a more resistant styrene film APA or HAV
Kč158.85
Perforated separation film ELA20 - blue - 125°C P1

Perforated separation film ELA20 - blue - 125°C P1

eshop_010186/6
This perforated film is primarily used during the vacuuming of laminated parts. In this technology, it is often not enough to rely solely on the release fabric, which ensures the passage of excess air and resin into the suction mat. The release fabric also ensures the following
Kč63.03
Rubber Vacuum Valve

Rubber Vacuum Valve

eshop_010164
Designed for vacuuming when using foil. Very easy to use. The inner diameter of the suction valve is 8 mm.
Kč104.54
Spiral tubing 6 mm

Spiral tubing 6 mm

eshop_800018/10
Spiral tubing for resin distribution during vacuum infusion. Inner diameter 4mm outer 6mm.
Kč37.33
Vacuum butyl rubber adhesive and sealing compound - Terostat

Vacuum butyl rubber adhesive and sealing compound - Terostat

eshop_010001
Vacuum butyl rubber adhesive and sealing compound in the form of a mass. From this material, you can create any shape of sealing for your work during vacuuming. A similar material is also available in the form of strips for faster and more convenient application - you can also find it in our
Kč893.83
vacuum hose 6/8 mm

vacuum hose 6/8 mm

eshop_010117/5
Rigid vacuum hose with an outer diameter of 8 mm, inner diameter of 6 mm. Plastic connectors, coupling fittings, vacuum valve, and vacuum gauge can also be ordered.
Kč79.43
Vacuum Pump P 1 (R +G)

Vacuum Pump P 1 (R +G)

eshop_010149/1
P1 VACUUM PUMP\n\nThe product is manufactured in Germany, two-year warranty (excluding worn parts)\n\nDiaphragm vacuum pump and compressor. With integrated fine control valve and pressure gauge.\n\n\n\tHigh
Kč16,749.30
Vacuum Pump P 3 (R +G)

Vacuum Pump P 3 (R +G)

eshop_010150
P3 – VACUUM PUMP\n\nGerman product, two-year warranty (excluding consumable parts)\n\nThe pump is particularly suitable for evacuating larger areas, e.g. in aircraft construction.\n\nDiaphragm vacuum pump and compressor
Kč45,013.75
Vacuum Pump P2(R+G)

Vacuum Pump P2(R+G)

eshop_010149
P2 VACUUM PUMP\n\nGerman product, two-year warranty (excluding consumable parts)\n\nDiaphragm vacuum pump and compressor. With integrated fine control valve and vacuum gauge.\n\nSame ultimate vacuum
Kč34,469.31
vakuometr

vakuometr

eshop_010164/1
Vacuum valve from R&G, for measuring and monitoring pressure.\nMeasuring range from 0 - 1 bar.\nConnection: 1/4 (external thread)
Kč567.34
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text