Release agents

Showing 1-12 of 24 item(s)

FMS - pore filler

eshop_002029/1

FMS is a pore filler for molds. It is suitable for filling the pores of molds (FMS) for molds made of fiberglass-reinforced polyester, epoxy, and other resins. It is used to fill the pores in both new molds and older molds with microporous areas and shallow surfaces.

Kč3,197.59

Formula Five - cleaner and polish 0.95 L

002046

Very effectively removes smudges and fingerprints from resin that occur during assembly, finishing work, or repairs. The product is available on order.

Kč608.32

Formula Five - release wax-1pc -340g

eshop_002046

FORMULA FIVE- release wax for general use, which mixes carnauba wax - the most durable protection in nature - with modern polymers and hydrocarbon waxes. Silicone is added for easy application and facilitates multiple releases

Kč603.94

Frekote 700 NC - separator

eshop_002030

Semi-permanent polymer separator for multiple use for separating all thermosets and most moldable polymers. Ensures high slip where problematic mold geometry complicates polymer processing. 700-NC cures at normal

Kč1,677.13

Frekote B 15 - base separator

eshop_002029

The pore filler fills the micropores of molds and fills in fine scratches on their surface. When used together with other Frekote products, B-15 acts as an excellent base layer that enhances the provided separation capabilities. It is applied with a thin even layer.

Kč5,124.35

Frekote NC 770 - separator

eshop_002055/2

Frekote separator 770-NC is a universal release agent with high slip suitable for cases where there are problems with mold geometry. It cures quickly at room temperature and creates a glossy surface on the castings. It is applied to a clean mold surface by spraying, sh

Kč1,740.81

Havel Wax 60-x3, 450g

eshop_900137

Universal release wax agent in paste form for processing polyester and epoxy\nresins.\nSuitable for models, new tools, and continuous production.\nAllows multiple demolding on established tools at temperatures up to 140°C.

Kč821.36

Mold Polish - Oskar's M-100 Paste

eshop_002039

Polishing paste, packaging 1kg

Kč696.91

Náhradní pěnový moltopren pro PVA štětec

eshop_002026

Replacement moltopren for PVA brush.

Kč57.39

Polishing Paste Oskar´s M-50 (1kg)

eshop_002039/4

Coarser polishing paste for molds and products. One package contains 1L of paste.

Kč672.02

PVA Brush Width 45 mm

eshop_002025

Working part made of foam moltopren. Suitable for manual applications. Replacement working moltopren part can be ordered.

Kč155.78

PVA Separator - Coating R+G

eshop_002024

Separator for epoxy, vinylester, and polyester resins up to max. 100°C. To create a primary layer, use a release wax beforehand. Application can be done, for example, with a brush for applying PVA (item no. 165 110). After drying, a shiny, strong finish can be seen.

Kč609.07