Epoxy and Polyester RESINS, HARDENERS AND GELCOATS

Showing 37-48 of 132 item(s)

Epoxy Resin LH 289

eshop_112220

Epoxy resin LH 289 is characterized by extremely low viscosity. During curing, it offers high-quality application properties such as optimal mechanical properties, good chemical resistance, excellent thermal properties, etc. It is suitable for the production of comp

Kč505.11

Epoxy Resin LH 300

eshop_111027

Very high-quality, medium-viscosity low-molecular resin for laminating parts with high resistance (up to 160°C). Must be cured at 90°C for a minimum of 3 hours. It is mixed with hardener H 300 (10:25) for temperature resistance up to 120°C or with hardener H 512 (

Kč727.66

Epoxy Resin LH 301

eshop_112216

Epoxy resin LH 301 is a resin that allows achieving temperature resistance of around 160°C with the appropriately selected hardener H 513. When curing with amines or polyamines, it offers high-quality application properties such as high mechanical properties, good ch

Kč625.17

Epoxy Resin LH 330

eshop_111057

Flexible epoxy resin suitable for curing at room temperature. The appropriate hardener is H 330, mixing ratio 100:40 by weight or 100:50 by volume. Gel time at 25 degrees Celsius is 70 min. Thermal resistance 50 degrees Celsius. Viscosity of the mixture at 25 degrees

Kč481.69

Epoxy Resin LH 385

eshop_111242

Epoxy resin LH 385 is characterized by low viscosity. The cured product is slightly flexible.\n\nWhen cured with amines or polyamines, it offers high-quality application properties such as high mechanical properties,\ngood chemical resistance,

Kč505.11

Epoxy Resin LL 201 Casting

111207

The LL 201 casting epoxy resin is a low-viscosity resin based on a mixture of bisphenol A type resins and epichlorohydrin, containing a certain amount of bifunctional epoxy alcohol as a reactive diluent. Mixing ratio 100 : 20 with hardener H 303 HT and H

Kč480.25

Epoxy Resin LR 285+ (Havel)

eshop_000000/xxx

Kč483.15

Epoxy Resin RIVERTABLE WWA

eshop_000034

Pouring epoxy resin designed primarily for creating casts with a thickness of 0-9cm. For example, pouring wooden table slabs into so-called Rivertables, etc.\n\nExcellent UV stability, clarity, colorless with the possibility of tinting using dyes and pigments, curing

Kč590.03

Epoxy Resin Surface Araldite SW 419-1

eshop_001074

Areas of use . tools for sheet forming . general mold production Processing methods Application using a brush or spatula Characteristic features . well spreadable . does not run . minimal sedimentation For curing, it is necessary to mix Hardener HV 2419 in

Kč951.67

Foam 29 x 20 mm core for hockey stick repairs SRS

eshop_900135/2

Foam for hockey stick repairs. Available in various lengths, depending on the manufacturer's supply. If the lengths differ from your request, you will be contacted.

Kč122.40

-Kč293.84

Foaming agent EE 2 /HAVEL/ for epoxy foaming resins LH 100 and LH 128

111014

Foaming agent for foaming resins LH 100 and LH 128. Mixing ratio 1-5% by weight. Always mix thoroughly before combining with the hardener. The rule applies that less agent = greater bulk density and more, conversely, less bulk density and lower strength.

Kč3,134.31 Kč3,428.15

Time left

-Kč1,067.22

Foaming Agent EP 50 /MGS/

001034

In the foaming resins L 35, L 36, and L 40, it is mixed with the foaming resin in a ratio of 100:1 to 100:3 max. up to 100:5. The foaming agent must be mixed as thoroughly as possible - preferably mechanically!

Kč3,913.14 Kč4,980.36

Time left