Epoxy resins, hardeners and gelcoats

Showing 73-96 of 102 item(s)

Hardener H 300

eshop_111025

Fast hardener with reduced exotherm, high temperature resistance (approx. 90°C) and high flexibility. Used in HAVEL and MGS epoxy resins. We recommend tempering at a minimum of 50°C. Hardening ratio 100:25

Kč934.10

Hardener H 330

eshop_111059

H 330 is suitable for epoxy LH 330, mixing ratio epoxy:hardener = 100:40 by weight or 100:50 by volume. Gel time at 25 degrees Celsius is 70 min. Thermal resistance is 50 degrees Celsius. Viscosity of the mixture at 25 degrees Celsius is 450 mPas/s. The material was developed

Kč547.57

Hardener H 505

eshop_111118

Hardener H 505 is a hardener for epoxy resins. It is suitable for all types of laminations at temperatures above 15°C. Higher thermal resistance of the cured resin can be achieved by post-curing the system at an elevated temperature of 50-60 °C. It belongs to the so-called fast hardeners. Hard

Kč512.44

Hardener H 507

eshop_111206

Characteristics: it is a liquid hardener for epoxy resins. The hardener is based on cycloaliphatic polyamine and does not contain nonylphenol. Physical parameters: Viscosity at 25°C (m Pa.s.) 7 - 11 Hydrogen equivalent g/mol 50 Density at 20 °C kg/m 3 930-

Kč513.90

Hardener H 507 A

eshop_111206/1

Hardener H 507 A is suitable for all types of laminations at temperatures above 15°C. Higher thermal resistance of the cured resin can be achieved by post-curing the system at an elevated temperature of 50-60 °C. Working time is approximately 40 minutes. The low viscosity of the mixture ensures quick

Kč573.93

Hardener H 508

eshop_111205

Characteristics: it is a liquid hardener for epoxy resins. The hardener is based on cycloaliphatic polyamine, the main component is Isophorone diamine. It does not contain nonylphenol. Physical parameters: Viscosity at 25°C (m Pa.s) 7 - 11 Hydrogen equivalent (g/mol)

Kč540.25

Hardener H 509

eshop_111114

Hardener H 509 is a hardener for epoxy resins. It is suitable for all types of laminations at temperatures above 15°C. Higher thermal resistance of the cured resin can be achieved by post-curing the system at an elevated temperature of 50-60 °C. Working time is approximately 70-90 m

Kč600.28

Hardener H 512

eshop_111210

Hardener H 512 is a liquid low-viscosity hardener for epoxy resins. The hardener is based on cyclic diamine. It is suitable for all types of laminations at temperatures above 15°C and where high thermal resistance is required. For proper curing, it is

Kč563.68

Hardener H 513

eshop_111213

Hardener H 513 (Previously H 284) is a hardener for epoxy resins. It is suitable for all types of laminations at temperatures above 15°C and where high thermal resistance is required. Higher thermal resistance of the cured resin can be achieved by post-curing sys

Kč538.06

Hardener H 514

eshop_111245

Hardener H 514 is a liquid low-viscosity hardener for epoxy resins. The hardener is based on cyclic diamine. Hardener H 514 is a hardener for epoxy resins. The working time is in the range of 10-15 minutes. Ratio to resin LH 206AH : H 514

Kč623.41

Hardener H 533

eshop_112228

Hardener H 533 is a liquid mixed hardener containing hydroxylated amine for low molecular weight epoxy resins. Hardener H 533 is characterized by a short processing time of 10-15 min. Hardener H 533 is a hardener for epoxy resins. It is suitable for all

Kč566.61

Hardener H 534

eshop_112229/1

Hardener H 534 is a liquid mixed hardener containing hydroxylated amine for low molecular weight epoxy resins. Hardener H 534 is characterized by a short processing time of 15-25 min. It is suitable for all types of laminations at temperatures above 15°C. Processing time

Kč440.69

Hardener H 535

eshop_111218

Hardener H 535 is a liquid mixed hardener containing hydroxylated amine for low molecular weight epoxy resins. Hardener H 535 is characterized by a short processing time of 25-30 min. Hardener H 535 is a hardener for epoxy resins. It is suitable for all

Kč566.61

Hardener H 536

eshop_111219

Characteristics: Hardener H 536 is a liquid mixed hardener containing hydroxylated amine for low molecular weight epoxy resins. Hardener H 536 is characterized by a longer processing time of 60-80 min. It is suitable for all types of laminations at temperatures

Kč661.04

Hardener H 538

eshop_111243

Hardener H 538 is a hardener for epoxy resins. It is suitable for\nmost laminations at temperatures above 15°C. Working time is 60-80\nmin. The product is not brittle. The composite is recommended to be\ntempered at 50°C for 3 – 5 hours. Higher temperatures

Kč801.16

Hardener HV 2419

eshop_001075

Hardener designed for epoxy gelcoat Araldite SW 419-1\nMixing ratio 100:13 /by weight/

Kč1,839.79

Hardener HY 2404

eshop_001053

Hardener for curing epoxy gelcoat Araldit SW 404 Mixing ratio 100:10 /by weight/ working time 25-30 min.

Kč1,672.59

Hardener L

eshop_001026

Hardener for curing resin L and EP gelcoats /R&G/, mixing ratio 100:40 (by weight), processing time 40 min.

Kč989.00

Hardener REN HY 5159 for RENGEL SW 56

eshop_001123/2

Hardener for the molding gelcoat SW 56. Recommended dosage of hardener HY 5159 in the ratio epoxy:hardener= 100:10 (by weight). After gradual tempering, heat-resistant up to 120°C, the processing time at 25°C and 250ml is 25-30 min.

Kč2,459.69

Hardener VE 3261 (now EPH 161)

eshop_001076

Hardener for curing epoxy resin L 20 (100:25 by weight) or Gelcoat P (100:17 by weight). Working time: 90 min. It is necessary to follow the curing instructions: 24 h at room temperature followed by post-curing for 15 h at 60 degrees

Kč975.09

Havel Adhesive G 40 sl. B 30

eshop_111121

Havel Adhesive G 40 component A5 + B30 (epoxy adhesive) is an epoxy system based on a mixture of epoxy resin and reactive thinner, cured with a mixed modified hardener.\nAppearance of components A5 light gray, B30 yellow\nUsage:\nIt is recommended for

Kč1,019.89

Havel Adhesive G 40 sl.A 5

eshop_111120

Structural adhesive for bonding laminated and wooden parts of materials such as Herex. It is also suitable for bonding parts made of polyester resin. The adhesive was developed especially for gluing parts that are not completely precise and require careful alignment during bonding.

Kč1,182.26

HAVELcell E1 component A

eshop_111101

The HAVELcell E1 epoxy foam is a structured epoxy resin with a specific gravity of approximately 550 kg/m3. Due to its low density, you can create a sandwich construction in your products. This material will save you time and reduce costs for your products. Part kt

Kč860.16

HAVELcell E1 component B

eshop_111102

HAVELcell E1 component B epoxy foam is a hardener for curing HAVELcell E1 component A epoxy foam in a ratio of 100:35 (by weight)

Kč1,169.82