Epoxy resins, hardeners and gelcoats

Showing 49-60 of 102 item(s)

Hardener 135 (MGS)

eshop_001008/1

Hardener for curing epoxy resin L 135, L 160, L, LR, LR, LR 100, LH 160. The mixing ratio is 100:35/by weight/ or 100:40/by volume/. Processing time for 100g /20 C is 25-30 min. Further necessary information can be obtained at http://www.momentive.com/

Kč819.90

Hardener 136 (MGS)

eshop_001019

Hardener for curing epoxy resin L 135, L 160, L, LR, LR, LR 100, LH 160. The mixing ratio is 100:35/by weight/ or 100:40/by volume/. Processing time for 100g /20 C is 1 - 2 hours. Further necessary information can be obtained at http://www.momentive.com/

Kč948.74

Hardener 285 (MGS)

eshop_001009

Hardener for curing epoxy resin 285. The mixing ratio is 100:40 /by weight/ 100:50 /by volume/ Processing time 100g / 20 C 50 minutes. For more detailed processing instructions see the technical data sheets MGS. Additional necessary information can be obtained at http://www.moment

Kč1,172.74

Hardener 286 (MGS)

eshop_001010

Hardener for curing epoxy resin 285. The mixing ratio is 100:40 /by weight/ 100:50 /by volume/ Working time 100g / 20 C 2 h. For more detailed processing instructions see the tech. sheets MGS. Further necessary information can be obtained at http://www.momentive.c

Kč1,156.27

Hardener 287 (MGS)

eshop_001011

Hardener for curing epoxy resin 285. The mixing ratio is 100:40 /by weight/ 100:50 /by volume/ Processing time 100g / 20 C 4 h. For more detailed processing instructions see the technical data sheets MGS. Further necessary information can be obtained at http://www.momentive.c

Kč1,583.95

-Kč97.83

Hardener 500 MGS

001024

Hardener for curing epoxy resin 285 Mixing ratio is 100:40/by weight and 100:50/by volume/. Working time 100g/20 C is 10-15 min. Hardener for fast curing even at low temperatures from +10 C You can find more necessary information like this

Kč1,043.50 Kč1,141.33

Time left

Hardener 7067 for gelcoat

eshop_900883

Hardener for transparent gelcoat 7060, more information in TL and BL.

Kč1,434.82

Hardener C

eshop_001030

Hardener for curing epoxy resin C. Mixing ratio resin:hardener= 100:60 (by weight). Processing time: 50 min. Details can be found in the R+G Handbook p.77/78

Kč812.58

-Kč127.47

Hardener F 250 /MGS/

001057

Hardener for curing molding resin F 200. The mixing ratio is 100:25 /by weight/. Processing time 100g/25 C 15-20min., gel time 1 mm. 1-2 h., curing at 25 C 24 h. Hardener F 250 is suitable for use in the production of molds without the requirement for thermal curing.

Kč764.84 Kč892.31

Time left

Hardener H 10

eshop_111070

Hardener H 10 is used for curing epoxy systems with increased UV stability* primarily for casting, laminating, coating, and adhesive epoxy systems. Processing can take place at a minimum of 10°C. The advantages of the products are excellent smoothness and good surface

Kč566.61

Hardener H 100 for epoxy spray gelcoat EG 100-W and EG 100-T

eshop_001046

Hardener for epoxy gelcoats. Mixing for EG 100 T: H100= 100:40 and for EG 100 W:H100= 100:26 by weight. Mix the gelcoat and hardener in the prescribed ratio and stir thoroughly. Only then can it be diluted if necessary. Do not load until the coating is fully cured.

Kč1,200.56

Hardener H 10A

eshop_111224

Hardener H 10A is a hardener as a replacement for H10. This hardener is particularly suitable for applications where the requirement is for the clearest possible laminating system. For example, for visible layers made in the first layer from glass fabric with an aluminum surface or in case

Kč659.58