Epoxy resins, hardeners and gelcoats

*Epoxy HAVEL*

*Hardeners HAVEL*

Epoxy resins MGS - HEXION

Hardeners MGS - HEXION

Epoxy resins R & G

Epoxy hardeners R&G

Gelcoat, paint thinners and hardener into gelcoats

Epoxy foams

Two-component epoxy adhesive

Others

Showing 1-12 of 102 item(s)

5 Minute Epoxy Adhesive Component A

eshop_001041

Professional resin primarily for bonding not only composite parts. Very suitable for manufacturing operations where it is necessary to quickly bond or fix individual parts before the actual laminating. A popular helper for more complex and demanding repairs of damage

Kč595.89

5 Minute Epoxy Adhesive Component B

eshop_001042

Hardener for 5-minute epoxy adhesive /R+G/ component B Mixing ratio 1:1 Details can be found in the R+G Handbook p.91

Kč1,997.03

Benzylalkohol

eshop_001122

Kč269.03

Clear Epoxy Gelcoat EG 100-T - for thin layers

eshop_001045

This epoxy gelcoat can be applied solely by spraying. It can also be applied as a brush coating. The secret to smooth surfaces. It creates a smooth visible layer depending on the surface of the mold. The surface does not require any further treatment after being removed from the mold.

Kč1,142.00

Epodur 619-0600 component A

eshop_001068

New epoxy resin from Spolchemie developed for laminating.

Kč636.88

Epodur 619-0600 component B

eshop_001069

Colorless hardener, suitable for casting systems or laminating with a longer processing time: approx. 4 hours.\n\nRiver table. Mixing ratio epoxy:hardener=100:40 by weight. Maximum layer 2cm. Subsequent curing required min. 50°C for 3 hours!

Kč975.09

Eporezit - T600 (slower hardener)

eshop_610032

Characteristics: it is a liquid hardener for casting epoxy resins. solvent-free Not\ntoxic. It is a modified aliphatic polyamide with low exothermic reaction and long\nprocessing time, characterized by low viscosity. T-600

Kč1,223.99

Epoxidová pryskyřice L 285 (MGS)

eshop_001007

Very high-quality resin for the aerospace industry and for model making. The resin with hardener creates a very viscous mixture, allowing the fibers to be quickly and thoroughly impregnated. As a result, the product has significantly lower weight and higher utility value. More details

Kč945.81

-Kč9.49

Epoxy foam 100 (Havel)

111012

Extremely viscous foaming epoxy resin, forms very tough foams. Cures even at room temperature, temperature resistance up to 50°C. Cured in a ratio of 100:15-20 (by weight) with hardener 128 or H 30.

Kč379.46 Kč388.94

Time left

Epoxy gelcoat 7060 clear

eshop_900882

UV stabilized transparent epoxy gelcoat for the visible layer of carbon parts, more information in TL and BL:

Kč1,541.70

Epoxy Gelcoat for Mold Production Araldit SW 404

eshop_001052

Top-quality gelcoat for mold production. Blue in color, it is known for its unmatched durability and time-tested quality. The only disadvantage is that it cannot be polished. Chemically resistant. For curing, use hardener Araldit HY 2404 in a ratio of 100:10. Curing time

Kč1,188.85

-Kč59.23

Epoxy gelcoat for mold production F 200 /MGS/

001054

Can be sanded and polished. Any repairs are easily feasible. Recommended hardener F 250, mixing ratio gelcoat: hardener= 100:25 by weight. Suitable for molds laminated with epoxy resin. After curing, it must be lightly sanded before further laminating for d

Kč631.80 Kč691.03

Time left