RELEASE AGENTS AND FILLERS

Showing 25-36 of 42 item(s)

PVA Brush Width 45 mm

eshop_002025

Working part made of foam moltopren. Suitable for manual applications. Replacement working moltopren part can be ordered.

Kč155.78

Separator for epoxy, vinylester, and polyester resins up to max. 100°C. To create a primary layer, use a release wax beforehand. Application can be done, for example, with a brush for applying PVA (item no. 165 110). After drying, a shiny, strong finish can be seen.

Kč609.07

PVA Separator - ECO (per 1l)

eshop_002023/2

PVA Separator - ECO is a liquid product that prevents two materials from sticking together. It is primarily used for separating products from composite and metal molds. PVA Separator is also suitable to combine with a release base wax, which is used as

Kč277.81

PVA Separator - ECO Blue (per 1l)

eshop_002023/3

PVA Separator - ECO is a liquid product that prevents two materials from sticking together. It is primarily used for separating products from composite and metal molds. PVA Separator is also suitable for combining with a release base wax, which is used as a

Kč265.73

Sekaná skelná vlákna 6 mm

eshop_002053

Suitable as a filler for resins and for many other applications.

Kč206.15

Separation Base Wax

eshop_002028

Highly effective base wax for base surfaces that are not easily wettable, e.g. laminate molds, silicone, and some metals. When using GRP molds, the base wax improves the wettability of the top surface. The separator itself can then be more easily evenly

Kč529.27

Separation Wax Oskar's M-700/C

eshop_002038

Wax-based separator. 425gr. Also suitable as a base layer for PVA separator, PVA does not gel.

Kč889.44

Separation Wax TR 104 397g

eshop_002034

High-quality wax-based separator, tested in our operations. The package contains 397g. Separator TR 104 can be replaced by separator TR 216. The separator is also suitable for higher temperatures. Separator TR is not suitable as a base layer under PVA, it causes eye

Kč809.28

Separator - FREWAX

eshop_900043

Frewax is a separator made from wax and polymer separation agents. This combination offers users the advantages of an easily spreadable wax and a reusable semi-permanent separator. The product must be shaken continuously before and during use.

Kč1,953.11

Separator MAT ultra 41-90

eshop_100020/1

Separator MAT ultra 41-90 is a highly release semi-permanent separator that gives the demolded part a matte surface.\n\nApply 4-5 layers without polishing on a clean polished mold. Dry for 15 minutes between layers and then 30 minutes for complete curing.&n

Kč2,876.96

Separator QV 5110 - Vantico

eshop_002032

Pasty separator based on wax containing solvents for general model building (replaces separator QZ 10). Apply the separator with a brush or cloth in a thin layer on the surface of the mold. Once the separator dries (approximately after 30 min.), polish the mold with a soft cloth.

Kč1,619.29

Separator QZ 5111 - Vantico, 0.7 kg, 3.75 kg

eshop_002031

Liquid separator based on wax containing solvents for general model building (replaces separator QZ 11). It is applied using a brush or spray gun two to three times at intervals of 10-15 minutes, allowed to dry, and always polished with a soft cloth.

Kč1,592.21