Home

AEROGLASS Glass Fabric 280 g/m2, width 100 cm, plain weave 8x7

eshop_500037

Very high-quality glass fabric for the production of strength parts. It is suitable for epoxy, polyester, and vinylester resins. After wetting, it is transparent.

Kč109.81

Catalyst for liquid silicone resin for casting molds and products. It is a firmer form of silicone that is still very flexible and tear-resistant. Suitable for larger molds or for less shape-demanding molds and products. Also, it

Kč1,827.20

Catalyst for HT 45

eshop_710146/a

Liquid catalyst suitable for casting molds and products. Processing time 10 min. Demolding time 1:20 hours. Viscosity: 8,000 cPs. This type is very popular and achieves a Shore hardness of 45 after curing. Mixing ratio 1:1(

Kč1,581.23

Catalyst for ZA 13

eshop_710123/a

Catalyst for liquid silicone resin for casting molds and products. It is a very soft type of silicone that is still very flexible and tear-resistant. Suitable for smaller molds or for geometrically demanding molds and production.

Kč1,803.77

Catalyst for ZA 22

eshop_710124/b

Catalyst for blue silicone resin. Processing time 15 min. Demolding time 1 hour. Viscosity: 5.000 cPs. This type is very popular and achieves a Shore hardness of 22 after curing. Mixing ratio 1:1 (by weight) Silicone ZA 22 is a tre

Kč1,751.43

Glass DIRECT roving 1200 tex

eshop_510002

Glass roving type E made from combined yarn without protective twist, suitable especially for weaving and winding. Modified especially for epoxy and polyester resins. A strand of individual glass fibers for local unidirectional reinforcement. 1200 tex (tex

Kč162.52

Glass DIRECT roving 2400 tex

eshop_510000

Strand of individual glass fibers WITHOUT PROTECTIVE TWIST. It is used for various applications, primarily for machine processing. In manual processing, it is used for longitudinal reinforcement of manufactured parts. The designation-number, the number of tex indicates how many grams

Kč135.06

Glass Roving ASSEMBLED 2400 tex

eshop_510001

Strand of individual glass fibers. It is used for various applications, primarily for machine processing. In manual processing, it is used for longitudinal reinforcement of manufactured parts. The designation-number, the number of tex indicates how many grams weigh 1000 mb of roving.

Kč165.08

Glass roving for edges - larger volume ECO 14 T5000 tex

eshop_003013

An indispensable helper for reinforcing the edges of molds and products. It significantly increases the strength of the edges, effectively removes air bubbles, and prevents chipping and sagging of the gelcoat at the edges. 5 kg=1000 meters (5000 tex) 0.5 kg=100 meters 0.1 kg=20 meters 1 linear meter

Kč321.15

HAVEL filler E1, component A

eshop_111107/1

Two-component filler for basic filling of epoxy laminates, wood, and most metals. The advantage of this filler is its ability to auto-penetrate the filled material. In practice, this means that if the substrate requires it, part of the epoxy resin will be released immediately after application.

Kč516.10

HAVEL filler E1, component B

eshop_111108/1

Hardener recommended for curing the epoxy putty HAVELfiller E1/A Mixing ratio 100:35 (by weight) working time is 20-30 minutes. A hardener with a longer or shorter working time can be supplied on request.

Kč670.92

HAVEL filler G - bal. 1kg

eshop_800007

Polyester two-component filler with a high content of glass fiber is suitable for filling various materials such as automotive bodies, cast iron castings, laminate, wood, and many other materials. HAVELfiller G easily replaces missing parts of the material

Kč746.69

HAVEL filler P - bal 2 kg

eshop_800021

Polyester two-component filler with an extended processing time is suitable for filling large parts and large surfaces. HAVELfiller P has excellent adhesion to various surfaces including galvanized steel, is thinner and shapes well. The filler is easy to apply and works excellently

Kč1,427.50

HAVEL filler SFP - bal. 1,8kg

eshop_800011

Polyester two-component filler recommended especially where extremely good sandability is required. HAVELfiller SFP is suitable for most common substrates including cast iron, aluminum, and laminates. The filler is medium dense, pore-free, and shapes very well. P

Kč995.59

HAVEL filler SP - fine finishing two-component filler - pack. 2 kg

eshop_800018

Polyester two-component fine filler for finishing small imperfections, grooves, and pores on automotive bodies or other metal parts, cast iron castings, and machine surfaces. HAVELfiller SP has excellent adhesion, is very thick, and shapes well.

Kč1,480.94

HAVEL filler U - bal. 1kg

eshop_800005

Universal polyester two-component filler suitable for filling common substrates including cast iron, aluminum, and fiberglass. HAVELfiller U is a thick, very well moldable filler that sands well, is pore-free, and is suitable as a universal filling compound. For

Kč587.40

HAVELfiller E - elastic white polyester two-component filler, 1kg

eshop_800013/a

Elastic extra white polyester two-component filler for filling common substrates including cast iron, aluminum, zinc, and fiberglass. HAVELfiller E is pore-free, elastic, suitable as both a filling and top filler, which sands well. For curing, use red

Kč564.70

IMPASOL - ORANGE (residue-free)

eshop_900160

Fast degreasing and cleaning liquid for industry and engineering IMPASOL® ORANGE is a combination of two excellent degreasing liquids into one absolutely unique FAST SAFE DEGREASER. Its advantage lies in the microemulsion content of natural terpenes (with

Kč592.96

Liquid Silicone HT 33 - transparent LT

eshop_710125

Liquid silicone resin for casting molds and products. It is a firmer form of silicone that, despite this, is very flexible and tear-resistant. Suitable for larger molds or for less shape-demanding molds and products. This type is also popular and sought after.

Kč1,827.20

Liquid Silicone HT 45 - transparent

eshop_710146

Liquid transparent silicone resin suitable for casting molds and products. Processing time 10 min. Demolding time 1 hour 20 minutes. Viscosity: 8,000 cPs. This type is very popular and achieves a Shore A hardness of 45 after curing.

Kč1,581.23

Liquid Silicone ZA 13 - transparent

eshop_710123

Liquid silicone resin for casting molds and products. It is a very soft type of silicone that, despite this, is very flexible and tear-resistant. Suitable for smaller molds or for geometrically demanding molds and products. This type is also obl

Kč1,803.77

Liquid Silicone ZA 22 - BLUE

eshop_710124

Liquid blue silicone resin suitable for casting molds and products. Processing time 15 min. Demolding time 1 hour. Viscosity: 5,000 cPs. This type is very popular and achieves a Shore hardness of 22 after curing. Mixing ratio 1:1 (by weight) K

Kč1,739.35

Polyester Filler DYNA - Spray Filler (pack 0.8l)

eshop_010321/1

Polyester spray filler for filling larger unevenness. It is characterized by excellent sandability and easy application. Packaging 0.8l.

Kč720.48

Home

AEROGLASS Glass Fabric 280 g/m2, width 100 cm, plain weave 8x7

Carbon roving - non-standard

Catalyst for HT 33

Catalyst for HT 45

Catalyst for ZA 13

Catalyst for ZA 22

Glass DIRECT roving 1200 tex

Glass DIRECT roving 2400 tex

Glass Roving ASSEMBLED 2400 tex

Glass roving for edges - larger volume ECO 14 T5000 tex

HAVEL filler E1, component A

HAVEL filler E1, component B

HAVEL filler G - bal. 1kg

HAVEL filler P - bal 2 kg

HAVEL filler SFP - bal. 1,8kg

HAVEL filler SP - fine finishing two-component filler - pack. 2 kg

HAVEL filler U - bal. 1kg

HAVELfiller E - elastic white polyester two-component filler, 1kg

IMPASOL - ORANGE (residue-free)

Liquid Silicone HT 33 - transparent LT

Liquid Silicone HT 45 - transparent

Liquid Silicone ZA 13 - transparent

Liquid Silicone ZA 22 - BLUE

Polyester Filler DYNA - Spray Filler (pack 0.8l)

Home