Home

5 Minute Epoxy Adhesive Component A

eshop_001041

Professional resin primarily for bonding not only composite parts. Very suitable for manufacturing operations where it is necessary to quickly bond or fix individual parts before the actual laminating. A popular helper for more complex and demanding repairs of damage

Kč595.89

5 Minute Epoxy Adhesive Component B

eshop_001042

Hardener for 5-minute epoxy adhesive /R+G/ component B Mixing ratio 1:1 Details can be found in the R+G Handbook p.91

Kč1,997.03

Accelerator D

eshop_000004/j

Designed for Havelpol 12 resin. Recommended dosage 0.5 - 1 g of accelerator per 100 g of resin.

Kč295.17

Aerosil 200 - thixotropic filler for thickening resins

eshop_002042

Suitable for thickening all resins. It is used wherever it is necessary to keep the resin in a vertical position so that it does not drip. Caution: in larger volumes, overheating of the resin may occur, leading to subsequent defects. To improve mechanical properties, add

Kč499.26

Apyral - filler for polyester resins 2E

eshop_010379

Material suitable as a filler for polyester and epoxy resins. It reduces shrinkage during curing and suppresses the flammability of resin products. Can be filled up to 100:200 (Apiral 2E) at this filling, self-extinguishing properties are created. This material is from the waste

Kč258.12

Benzylalkohol

eshop_001122

Kč269.03

Butanox M 50 peroxide for curing polyester resins

eshop_000023

The most commonly used version of butanox. Suitable for temperatures above 20 °C. Also available in a red-colored version for visual inspection

Kč434.84

Cabosil M5 (bal.10kg)

eshop_002042/1

Silica-based material. Like Aerosil 200, it is used for thickening resins and paints. Or for thixotropic modifications of these materials. Original packaging 10kg in a paper bag. It can be combined with other fillers such as microballoons, cotton in

Kč567.34

Carbon chopped fibers 3mm

eshop_003020/6

Material suitable for mixing with polyester and epoxy resins. Together with the resin and possibly other suitable fillers such as microballoons, Cabosil can fill hard-to-reach areas, or it can be used to bond necessary parts in the laminate.

Kč2,875.20

Carbon Powder - Ground Fiber

eshop_002071

Ground carbon fibers are a suitable filler for most resins. They are primarily used to enhance mechanical properties and also to ensure the dissipation of electrostatic charge.

Kč1,490.31

Clear Epoxy Gelcoat EG 100-T - for thin layers

eshop_001045

This epoxy gelcoat can be applied solely by spraying. It can also be applied as a brush coating. The secret to smooth surfaces. It creates a smooth visible layer depending on the surface of the mold. The surface does not require any further treatment after being removed from the mold.

Kč1,142.00

Clear Polyester Gelcoat GS 100 S - Norpol GS Base - S

eshop_000015

The secret of smooth surfaces. Creates a smooth visible layer depending on the surface of the mold. The surface requires no further treatment after removal from the mold. You create the surface directly in the mold. Financial and effective savings. Pigments can be used for coloring

Kč363.83

Cobalt Accelerator for Curing Polyester and Vinyl Ester Resins 1 %

eshop_000026

Accelerates the curing process. Some resins are not pre-accelerated for various reasons. This accelerator allows you to accelerate them just before processing. The standard addition of the accelerator is 0.5-3% of the weight of the resin used. WARNING DO NOT MIX ACCELERATOR WITH CATALYST

Kč531.47

Cotton Flakes

eshop_002048

Areas of use: production of lightweight, non-flowing adhesives, casting elements of molds and surfaces of structural molds using a mixture with 50% content of glass fiber cuttings and 50% content of cotton flakes. Volume data serves to assess the size of the supplied quantity.

Kč434.84

Crystic U 1131 T (ortho) self-extinguishing polyester resin for DIN 5510

eshop_900581

CRYSTIC U 1131 T is a filled, orthophthalic, non-accelerated thixotropic unsaturated polyester resin with low styrene content. It is suitable for fire-resistant/self-extinguishing laminates with reduced smoke generation. CRYSTIC U 1131 T is halogen-free and does not contain heavy

Kč140.55

Epodur 619-0600 component A

eshop_001068

New epoxy resin from Spolchemie developed for laminating.

Kč636.88

Epodur 619-0600 component B

eshop_001069

Colorless hardener, suitable for casting systems or laminating with a longer processing time: approx. 4 hours.\n\nRiver table. Mixing ratio epoxy:hardener=100:40 by weight. Maximum layer 2cm. Subsequent curing required min. 50°C for 3 hours!

Kč975.09

Eporezit - T600 (slower hardener)

eshop_610032

Characteristics: it is a liquid hardener for casting epoxy resins. solvent-free Not\ntoxic. It is a modified aliphatic polyamide with low exothermic reaction and long\nprocessing time, characterized by low viscosity. T-600

Kč1,223.99

Epoxidová pryskyřice L 285 (MGS)

eshop_001007

Very high-quality resin for the aerospace industry and for model making. The resin with hardener creates a very viscous mixture, allowing the fibers to be quickly and thoroughly impregnated. As a result, the product has significantly lower weight and higher utility value. More details

Kč945.81

Epoxy gelcoat 7060 clear

eshop_900882

UV stabilized transparent epoxy gelcoat for the visible layer of carbon parts, more information in TL and BL:

Kč1,541.70

Epoxy Gelcoat for Mold Production Araldit SW 404

eshop_001052

Top-quality gelcoat for mold production. Blue in color, it is known for its unmatched durability and time-tested quality. The only disadvantage is that it cannot be polished. Chemically resistant. For curing, use hardener Araldit HY 2404 in a ratio of 100:10. Curing time

Kč1,188.85

Epoxy Gelcoat P for Mold Production, Black

eshop_001061

Creates a solid surface and edges of molds, is polishable and has a black color. After mixing, we recommend vacuuming in a prepared bell to remove microbubbles formed during mixing. Recommended hardeners EPH 161 (VE 3261) and EPH 573 (VE 2723). The coverage is 0.5-1 kg/m2

Kč1,256.20

Epoxy gelcoat white spray EG 100-W - for thin layers

eshop_001044

A solution of medium molecular weight epoxy resin in a mixture of organic solvents with the addition of additives, white shade RAL 9003. This epoxy gelcoat can be applied solely by spraying. It can also be applied as a brush coating. The secret of smooth p

Kč1,054.15

Epoxy Resin 324 ( 371 1200 )

eshop_001037/1

Relatively inexpensive and proven resin CHS EPOXY 1200 for various applications. Characterized by high density, it is most commonly used for bonding, has good adhesion to most materials. Very tough resin. It is mixed with hardener P 11 in a ratio of 100:7 processing time

Kč398.60