Home

Fiberglass mat - marble pattern - dark gray MG 209 width 100cm

eshop_540020

The base consists of a fiberglass mat 30g/m2. After printing one of the designs, the weight increases by 5 - 10 grams/m2. Upon request, the option to choose from multiple designs.

Kč162.52

Glass Fiber Mat - Aramid Pattern - Carbon. - CF 702 width 100cm

eshop_540022

The base consists of a glass mat 30g/m2. After printing one of the designs, the weight increases by 5 - 10 grams/m2. Upon request, the option to choose from multiple designs.

Kč173.35

Glass Fiber Mat - Brick Pattern - VS 302 BW Width 100cm

eshop_540021

The base consists of a glass mat 30g/m2. After printing one of the designs, the weight increases by 5 - 10 grams/m2. Upon request, the option to choose from multiple designs.

Kč167.93

Glass Fiber Mat - Marble Pattern - Light - MG 202 W width 100cm

eshop_540024

The base consists of a glass mat 30g/m2. After printing one of the designs, the weight increases by 5 - 10 grams/m2. Upon request, the option to choose from multiple designs.

Kč162.52

Glass mat 100 g/m2 emulsion, width 125 cm

eshop_500006/1

Glass mat suitable for the first layer on gelcoat. It is particularly suitable for more complex shapes. Emulsion mats - emulsion binder based on PVA (polyvinyl alcohol) Advantages: dissolves very quickly in styrene, allowing their use even in the production of shapes

Kč320.46

Glass mat 30 g/m2, width 100 cm

eshop_004060

Material suitable as the first and last layer of finished parts and molds. Due to its low weight, it is very flexible and suitable for very complex shapes where fabric or thicker mat cannot hold up. Designed for impregnation with polyesters and epoxies, during epoxy impregnation

Kč73.13

Glass mat 300g/m2 width 125 cm - powdered

eshop_500000

Also suitable for products made from polyester, vinylester, and epoxy resins.

Kč166.69

Glass mat 300g/m2, width 1270 mm - stitched with polyester fiber

eshop_540011

Glass mat made of chopped glass fibers. The glass fibers are stitched with polyester fiber so that the mat can be pre-shaped into relatively complex shapes while still dry before being placed into the mold. Because no

Kč210.10

View

Glass mat 450g/m2 width 125 cm - powdered

eshop_500001

Glass non-woven reinforcement, made of interwoven short fibers. It is mainly used for products made from polyester resins. After saturation, it softens and perfectly conforms to the shape of the mold. Sold by weight, one kg approximately 2.2m2. Also suitable for products made from vinylester.

Kč120.79

Glass mat 450g/m2, emulsion width 125cm

eshop_540035/a

Glass non-woven reinforcement, made of mutually intertwined short fibers. It is mainly used for products made from polyester resins. After saturation, it softens and excellently conforms to the shape of the mold. We sell by weight, one kg approximately 2.2m2.

Kč120.79

Glass mat 600 g/m2 width 125 cm - emulsion

eshop_500003/1

Emulsion mats - emulsion binder based on PVA (polyvinyl alcohol) Advantages: dissolves very quickly in styrene, allowing their use even in the production of geometrically complex products These mats are suitable for the production of laminates using all types of unsaturated resins

Kč113.47

Glass mat 600g/m2, w.130 cm - stitched with polyester fiber

eshop_540013

Kč204.97

Glass mat emulsion 150g/m2, width 125 cm

eshop_500006

Kč238.28

Glass mat emulsion 225g/m2, width 125 cm

eshop_500008

Kč231.91

Glass mat emulsion 300g/m2, width 125 cm

eshop_500005

Kč101.46

Hardener for PUR 2K and 3K sl.B

eshop_010298/4

The hardener for PUR 2K 45 and 3K 90 is Isocyanate. Its description is part of the TL for PUR 2K 45 and PUR 3K 90 component A Properties of the hardener Density (20 °C) Isocyanate 1.240 g/cm3 Viscosity (25 °C) Isocyanate 240 cP/ mPa.s Weight ratio 100 Polyol 118 Isocyanate Volume

Kč510.24

Ipitherm G - 0 - 35 R - component A

eshop_000041/1

Two-component polyurethane system IPITHERM designated G-0-35R is a polyurethane-based foaming system suitable for foaming and filling hollow spaces. The mixing ratio is 100:135 (by weight). Use IPITHERM G-0-35R /component B/ as the hardener.

Kč446.92

Ipitherm G - 0 - 35 R - component B

eshop_000041/2

Two-component polyurethane system IPITHERM designated G-0-35R is a polyurethane-based foaming system suitable for foaming and filling hollow spaces. Mixing ratio 100:135 (by weight)\n\n \n\n \n\nIn 2020, the REAC regulation

Kč446.92

Labels for Laminating A4 (mat)

eshop_010218

Thinner mat for label production. Can be easily printed and impregnated in the first or last layer of the product. The fibers become translucent after impregnation and the print itself appears, which is perfectly protected by resin.\nDesigned primarily for laser printers.

Kč36.24

PUR 2K - 45 Polyurethane Foam sl.A

eshop_010298/2

Polyurethane foam for discontinuous production of parts and cast insulation with excellent dimensional stability. PUR 2K 45 is optionally self-extinguishing polyurethane foam intended generally for foaming into molds, whether metal, fiberglass, or wooden, i.e. for discontinuous

Kč375.18

PUR 3K - 90 Polyurethane Foam sl.A

eshop_010298/3

PUR 3K - 90 Polyurethane foam for discontinuous production of parts and cast insulation with excellent dimensional stability PUR 3K - 90 is optionally self-extinguishing polyurethane foam intended generally for foaming into molds, whether metal, fiberglass or wooden, i.e. for

Kč375.18