Home

Catalyst for HT 33

eshop_710125/c

Catalyst for liquid silicone resin for casting molds and products. It is a firmer form of silicone that is still very flexible and tear-resistant. Suitable for larger molds or for less shape-demanding molds and products. Also, it

Kč1,827.20

Catalyst for HT 45

eshop_710146/a

Liquid catalyst suitable for casting molds and products. Processing time 10 min. Demolding time 1:20 hours. Viscosity: 8,000 cPs. This type is very popular and achieves a Shore hardness of 45 after curing. Mixing ratio 1:1(

Kč1,581.23

Catalyst for ZA 13

eshop_710123/a

Catalyst for liquid silicone resin for casting molds and products. It is a very soft type of silicone that is still very flexible and tear-resistant. Suitable for smaller molds or for geometrically demanding molds and production.

Kč1,803.77

Catalyst for ZA 22

eshop_710124/b

Catalyst for blue silicone resin. Processing time 15 min. Demolding time 1 hour. Viscosity: 5.000 cPs. This type is very popular and achieves a Shore hardness of 22 after curing. Mixing ratio 1:1 (by weight) Silicone ZA 22 is a tre

Kč1,751.43

Fiberglass mat - marble pattern - dark gray MG 209 width 100cm

eshop_540020

The base consists of a fiberglass mat 30g/m2. After printing one of the designs, the weight increases by 5 - 10 grams/m2. Upon request, the option to choose from multiple designs.

Kč162.52

Glass Fiber Mat - Aramid Pattern - Carbon. - CF 702 width 100cm

eshop_540022

The base consists of a glass mat 30g/m2. After printing one of the designs, the weight increases by 5 - 10 grams/m2. Upon request, the option to choose from multiple designs.

Kč173.35

Glass Fiber Mat - Brick Pattern - VS 302 BW Width 100cm

eshop_540021

The base consists of a glass mat 30g/m2. After printing one of the designs, the weight increases by 5 - 10 grams/m2. Upon request, the option to choose from multiple designs.

Kč167.93

Glass Fiber Mat - Marble Pattern - Light - MG 202 W width 100cm

eshop_540024

The base consists of a glass mat 30g/m2. After printing one of the designs, the weight increases by 5 - 10 grams/m2. Upon request, the option to choose from multiple designs.

Kč162.52

Glass mat 100 g/m2 emulsion, width 125 cm

eshop_500006/1

Glass mat suitable for the first layer on gelcoat. It is particularly suitable for more complex shapes. Emulsion mats - emulsion binder based on PVA (polyvinyl alcohol) Advantages: dissolves very quickly in styrene, allowing their use even in the production of shapes

Kč320.46

Glass mat 30 g/m2, width 100 cm

eshop_004060

Material suitable as the first and last layer of finished parts and molds. Due to its low weight, it is very flexible and suitable for very complex shapes where fabric or thicker mat cannot hold up. Designed for impregnation with polyesters and epoxies, during epoxy impregnation

Kč73.13

Glass mat 300g/m2 width 125 cm - powdered

eshop_500000

Also suitable for products made from polyester, vinylester, and epoxy resins.

Kč166.69

Glass mat 300g/m2, width 1270 mm - stitched with polyester fiber

eshop_540011

Glass mat made of chopped glass fibers. The glass fibers are stitched with polyester fiber so that the mat can be pre-shaped into relatively complex shapes while still dry before being placed into the mold. Because no

Kč210.10

View

Glass mat 450g/m2 width 125 cm - powdered

eshop_500001

Glass non-woven reinforcement, made of interwoven short fibers. It is mainly used for products made from polyester resins. After saturation, it softens and perfectly conforms to the shape of the mold. Sold by weight, one kg approximately 2.2m2. Also suitable for products made from vinylester.

Kč120.79

Glass mat 450g/m2, emulsion width 125cm

eshop_540035/a

Glass non-woven reinforcement, made of mutually intertwined short fibers. It is mainly used for products made from polyester resins. After saturation, it softens and excellently conforms to the shape of the mold. We sell by weight, one kg approximately 2.2m2.

Kč120.79

Glass mat 600 g/m2 width 125 cm - emulsion

eshop_500003/1

Emulsion mats - emulsion binder based on PVA (polyvinyl alcohol) Advantages: dissolves very quickly in styrene, allowing their use even in the production of geometrically complex products These mats are suitable for the production of laminates using all types of unsaturated resins

Kč113.47

Glass mat 600g/m2, w.130 cm - stitched with polyester fiber

eshop_540013

Kč204.97

Glass mat emulsion 150g/m2, width 125 cm

eshop_500006

Kč238.28

Glass mat emulsion 225g/m2, width 125 cm

eshop_500008

Kč231.91

Glass mat emulsion 300g/m2, width 125 cm

eshop_500005

Kč101.46

Hardener for PUR 2K and 3K sl.B

eshop_010298/4

The hardener for PUR 2K 45 and 3K 90 is Isocyanate. Its description is part of the TL for PUR 2K 45 and PUR 3K 90 component A Properties of the hardener Density (20 °C) Isocyanate 1.240 g/cm3 Viscosity (25 °C) Isocyanate 240 cP/ mPa.s Weight ratio 100 Polyol 118 Isocyanate Volume

Kč510.24

Ipitherm G - 0 - 35 R - component A

eshop_000041/1

Two-component polyurethane system IPITHERM designated G-0-35R is a polyurethane-based foaming system suitable for foaming and filling hollow spaces. The mixing ratio is 100:135 (by weight). Use IPITHERM G-0-35R /component B/ as the hardener.

Kč446.92

Ipitherm G - 0 - 35 R - component B

eshop_000041/2

Two-component polyurethane system IPITHERM designated G-0-35R is a polyurethane-based foaming system suitable for foaming and filling hollow spaces. Mixing ratio 100:135 (by weight)\n\n \n\n \n\nIn 2020, the REAC regulation

Kč446.92

Labels for Laminating A4 (mat)

eshop_010218

Thinner mat for label production. Can be easily printed and impregnated in the first or last layer of the product. The fibers become translucent after impregnation and the print itself appears, which is perfectly protected by resin.\nDesigned primarily for laser printers.

Kč36.24

Liquid Silicone HT 33 - transparent LT

eshop_710125

Liquid silicone resin for casting molds and products. It is a firmer form of silicone that, despite this, is very flexible and tear-resistant. Suitable for larger molds or for less shape-demanding molds and products. This type is also popular and sought after.

Kč1,827.20