Home

Fiberglass mat - marble pattern - dark gray MG 209 width 100cm

eshop_540020

The base consists of a fiberglass mat 30g/m2. After printing one of the designs, the weight increases by 5 - 10 grams/m2. Upon request, the option to choose from multiple designs.

Kč162.52

Glass Fiber Mat - Aramid Pattern - Carbon. - CF 702 width 100cm

eshop_540022

The base consists of a glass mat 30g/m2. After printing one of the designs, the weight increases by 5 - 10 grams/m2. Upon request, the option to choose from multiple designs.

Kč173.35

Glass Fiber Mat - Brick Pattern - VS 302 BW Width 100cm

eshop_540021

The base consists of a glass mat 30g/m2. After printing one of the designs, the weight increases by 5 - 10 grams/m2. Upon request, the option to choose from multiple designs.

Kč167.93

Glass Fiber Mat - Marble Pattern - Light - MG 202 W width 100cm

eshop_540024

The base consists of a glass mat 30g/m2. After printing one of the designs, the weight increases by 5 - 10 grams/m2. Upon request, the option to choose from multiple designs.

Kč162.52

Glass mat 100 g/m2 emulsion, width 125 cm

eshop_500006/1

Glass mat suitable for the first layer on gelcoat. It is particularly suitable for more complex shapes. Emulsion mats - emulsion binder based on PVA (polyvinyl alcohol) Advantages: dissolves very quickly in styrene, allowing their use even in the production of shapes

Kč320.46

Glass mat 30 g/m2, width 100 cm

eshop_004060

Material suitable as the first and last layer of finished parts and molds. Due to its low weight, it is very flexible and suitable for very complex shapes where fabric or thicker mat cannot hold up. Designed for impregnation with polyesters and epoxies, during epoxy impregnation

Kč73.13

Glass mat 300g/m2 width 125 cm - powdered

eshop_500000

Also suitable for products made from polyester, vinylester, and epoxy resins.

Kč166.69

Glass mat 300g/m2, width 1270 mm - stitched with polyester fiber

eshop_540011

Glass mat made of chopped glass fibers. The glass fibers are stitched with polyester fiber so that the mat can be pre-shaped into relatively complex shapes while still dry before being placed into the mold. Because no

Kč210.10

View

Glass mat 450g/m2 width 125 cm - powdered

eshop_500001

Glass non-woven reinforcement, made of interwoven short fibers. It is mainly used for products made from polyester resins. After saturation, it softens and perfectly conforms to the shape of the mold. Sold by weight, one kg approximately 2.2m2. Also suitable for products made from vinylester.

Kč120.79

Glass mat 450g/m2, emulsion width 125cm

eshop_540035/a

Glass non-woven reinforcement, made of mutually intertwined short fibers. It is mainly used for products made from polyester resins. After saturation, it softens and excellently conforms to the shape of the mold. We sell by weight, one kg approximately 2.2m2.

Kč120.79

Glass mat 600 g/m2 width 125 cm - emulsion

eshop_500003/1

Emulsion mats - emulsion binder based on PVA (polyvinyl alcohol) Advantages: dissolves very quickly in styrene, allowing their use even in the production of geometrically complex products These mats are suitable for the production of laminates using all types of unsaturated resins

Kč113.47

Glass mat 600g/m2, w.130 cm - stitched with polyester fiber

eshop_540013

Kč204.97

Glass mat emulsion 150g/m2, width 125 cm

eshop_500006

Kč238.28

Glass mat emulsion 225g/m2, width 125 cm

eshop_500008

Kč231.91

Glass mat emulsion 300g/m2, width 125 cm

eshop_500005

Kč101.46

HAVEL filler E1, component A

eshop_111107/1

Two-component filler for basic filling of epoxy laminates, wood, and most metals. The advantage of this filler is its ability to auto-penetrate the filled material. In practice, this means that if the substrate requires it, part of the epoxy resin will be released immediately after application.

Kč516.10

HAVEL filler E1, component B

eshop_111108/1

Hardener recommended for curing the epoxy putty HAVELfiller E1/A Mixing ratio 100:35 (by weight) working time is 20-30 minutes. A hardener with a longer or shorter working time can be supplied on request.

Kč670.92

HAVEL filler G - bal. 1kg

eshop_800007

Polyester two-component filler with a high content of glass fiber is suitable for filling various materials such as automotive bodies, cast iron castings, laminate, wood, and many other materials. HAVELfiller G easily replaces missing parts of the material

Kč746.69

HAVEL filler P - bal 2 kg

eshop_800021

Polyester two-component filler with an extended processing time is suitable for filling large parts and large surfaces. HAVELfiller P has excellent adhesion to various surfaces including galvanized steel, is thinner and shapes well. The filler is easy to apply and works excellently

Kč1,427.50

HAVEL filler SFP - bal. 1,8kg

eshop_800011

Polyester two-component filler recommended especially where extremely good sandability is required. HAVELfiller SFP is suitable for most common substrates including cast iron, aluminum, and laminates. The filler is medium dense, pore-free, and shapes very well. P

Kč995.59

HAVEL filler SP - fine finishing two-component filler - pack. 2 kg

eshop_800018

Polyester two-component fine filler for finishing small imperfections, grooves, and pores on automotive bodies or other metal parts, cast iron castings, and machine surfaces. HAVELfiller SP has excellent adhesion, is very thick, and shapes well.

Kč1,480.94

HAVEL filler U - bal. 1kg

eshop_800005

Universal polyester two-component filler suitable for filling common substrates including cast iron, aluminum, and fiberglass. HAVELfiller U is a thick, very well moldable filler that sands well, is pore-free, and is suitable as a universal filling compound. For

Kč587.40

HAVELfiller E - elastic white polyester two-component filler, 1kg

eshop_800013/a

Elastic extra white polyester two-component filler for filling common substrates including cast iron, aluminum, zinc, and fiberglass. HAVELfiller E is pore-free, elastic, suitable as both a filling and top filler, which sands well. For curing, use red

Kč564.70

IMPASOL - ORANGE (residue-free)

eshop_900160

Fast degreasing and cleaning liquid for industry and engineering IMPASOL® ORANGE is a combination of two excellent degreasing liquids into one absolutely unique FAST SAFE DEGREASER. Its advantage lies in the microemulsion content of natural terpenes (with

Kč592.96