Home

Aerosil 200 - thixotropic filler for thickening resins

eshop_002042

Suitable for thickening all resins. It is used wherever it is necessary to keep the resin in a vertical position so that it does not drip. Caution: in larger volumes, overheating of the resin may occur, leading to subsequent defects. To improve mechanical properties, add

Kč499.26

Apyral - filler for polyester resins 2E

eshop_010379

Material suitable as a filler for polyester and epoxy resins. It reduces shrinkage during curing and suppresses the flammability of resin products. Can be filled up to 100:200 (Apiral 2E) at this filling, self-extinguishing properties are created. This material is from the waste

Kč258.12

Aramid diagonal tape 030.265191610-TB (2728), 11.60 g/bm, width 30mm

eshop_400036

Hmotnost 11,6 g/bm

Kč92.09

Aramid diagonal tape width 40 mm 040.465343220-TB(old number 040.465343160-TB)(3155)

eshop_008100

Hmotnost 23,40 g/bm

Kč170.64

Aramid sleeve diameter 20 mm, 020.348201210-T /2268/- 6.50 g/bm

eshop_008092

0,148 kg/m2 0,650 kg/100m

Kč39.02

Aramid sleeve diameter 20mm, 020.2722221210-T (2253)- 21.02 g/bm

eshop_008098/2

0,424 kg/m2 2,102 kg/100m

Kč138.06

Aramid tape diagonal width 10 mm, 010.3726840-TB (1625) - 3.36 g/bm

eshop_008103

Material specifically sewn for reinforcing the edges of laminated parts. It shapes well according to the shape of the substrate. Due to the diagonal weaving method, it is also suitable for very complex shapes. Finished edges Suitable for internal edges. Weight 3.36 g/bm

Kč33.60

Aramid tape diagonal width 20 mm, 020.26534840 (8698)- 6.25 g/bm

eshop_008097

Aramid tape width 20 mm. Material directly sewn for reinforcing the edges of laminated parts. It shapes well according to the shape of the substrate. Due to the diagonal weaving method, it is also suitable for very complex shapes. Finished edges. Weight 6.25 g/bm

Kč65.23

Aramid-carbon sleeve diameter 32 mm, 032.844026-ACT2 (2819)- 28.54 g/bm

eshop_008085

Diameter 32 mm. with fiber orientation at an angle of 45°. Weight 28.47 g/m. Suitable for pipes with a diameter of 13-38 mm. (0.378 kg/m2 2.854 kg/100m)

Kč300.14

Aramid-Carbon Sleeve Diameter 45 mm, 045.1004022-ACT2 (3192)

eshop_008086

Diameter 45 mm. with fiber orientation at an angle of 45°. Weight 33.52 g/m. Suitable for pipes with a diameter of 16-53 mm.

Kč271.03

Aramid-carbon sleeve diameter 60 mm, 060.1006226-ACT2 (33.80 g/bm)/3703/

eshop_008087

Diameter 60 mm. with fiber orientation at an angle of 45°. Weight 33.84 g/m. (0.308 kg/m2 3.380 kg/100m)

Kč303.14

Cabosil M5 (bal.10kg)

eshop_002042/1

Silica-based material. Like Aerosil 200, it is used for thickening resins and paints. Or for thixotropic modifications of these materials. Original packaging 10kg in a paper bag. It can be combined with other fillers such as microballoons, cotton in

Kč567.34

Carbon chopped fibers 3mm

eshop_003020/6

Material suitable for mixing with polyester and epoxy resins. Together with the resin and possibly other suitable fillers such as microballoons, Cabosil can fill hard-to-reach areas, or it can be used to bond necessary parts in the laminate.

Kč2,875.20

Carbon Powder - Ground Fiber

eshop_002071

Ground carbon fibers are a suitable filler for most resins. They are primarily used to enhance mechanical properties and also to ensure the dissipation of electrostatic charge.

Kč1,490.31