Home

Antique Brown RAL 8003 Pigment Paste

eshop_002015/2

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. The pigment paste is made by grinding the pigment with resin between rollers. Because the pigment is very well mixed, only a small amount is needed to color the resin

Kč2,677.84

Black pigment paste RAL 9005

eshop_002021/2

Kč1,258.61

Black Pigment Paste RAL 9127

eshop_002010/1a

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Up to 20% of the total resin volume. A larger amount may significantly affect the parameters of the cured resin. You can find more pigment pastes in the category

Kč873.04

Catalyst for HT 33

eshop_710125/c

Catalyst for liquid silicone resin for casting molds and products. It is a firmer form of silicone that is still very flexible and tear-resistant. Suitable for larger molds or for less shape-demanding molds and products. Also, it

Kč1,827.20

Catalyst for HT 45

eshop_710146/a

Liquid catalyst suitable for casting molds and products. Processing time 10 min. Demolding time 1:20 hours. Viscosity: 8,000 cPs. This type is very popular and achieves a Shore hardness of 45 after curing. Mixing ratio 1:1(

Kč1,581.23

Catalyst for ZA 13

eshop_710123/a

Catalyst for liquid silicone resin for casting molds and products. It is a very soft type of silicone that is still very flexible and tear-resistant. Suitable for smaller molds or for geometrically demanding molds and production.

Kč1,803.77

Catalyst for ZA 22

eshop_710124/b

Catalyst for blue silicone resin. Processing time 15 min. Demolding time 1 hour. Viscosity: 5.000 cPs. This type is very popular and achieves a Shore hardness of 22 after curing. Mixing ratio 1:1 (by weight) Silicone ZA 22 is a tre

Kč1,751.43

Cyan Blue Pigment Paste RAL 5010

eshop_002005

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Can be colored up to 20% of the resin volume. A larger amount may significantly affect the parameters of the cured resin.

Kč2,679.30

Dark Green RAL 6002 Pigment Paste

eshop_002075/2

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats. Recommended dosage up to 20%. Larger amounts may significantly affect the mechanical properties of the gelcoat or resin.

Kč2,986.76

Dove Blue Pigment Paste RAL 5014

eshop_002099/E

Pigments are suitable for coloring polyester, epoxy, or polyurethane resins and gelcoats.

Kč1,429.69

Graphite Black Pigment Paste RAL 9011

eshop_002010/1

The pigment paste is made by grinding pigment with resin between rollers. Because the pigment is very well mixed, often only a very small amount of pigment paste is needed to color the resin or gelcoat. To color thin layers of gelcoats, it is necessary

Kč1,441.04

View

Gravel Grey RAL 7032 Pigment Paste

eshop_002011/1

Kč1,603.19

Green Pigment Paste RAL 6001

eshop_002017

Kč2,904.77

Hardener for PUR 2K and 3K sl.B

eshop_010298/4

The hardener for PUR 2K 45 and 3K 90 is Isocyanate. Its description is part of the TL for PUR 2K 45 and PUR 3K 90 component A Properties of the hardener Density (20 °C) Isocyanate 1.240 g/cm3 Viscosity (25 °C) Isocyanate 240 cP/ mPa.s Weight ratio 100 Polyol 118 Isocyanate Volume

Kč510.24

Heavenly Blue Pigment Paste RAL 5015

eshop_002004

Kč2,258.01

Ipitherm G - 0 - 35 R - component A

eshop_000041/1

Two-component polyurethane system IPITHERM designated G-0-35R is a polyurethane-based foaming system suitable for foaming and filling hollow spaces. The mixing ratio is 100:135 (by weight). Use IPITHERM G-0-35R /component B/ as the hardener.

Kč446.92

Ipitherm G - 0 - 35 R - component B

eshop_000041/2

Two-component polyurethane system IPITHERM designated G-0-35R is a polyurethane-based foaming system suitable for foaming and filling hollow spaces. Mixing ratio 100:135 (by weight)\n\n \n\n \n\nIn 2020, the REAC regulation

Kč446.92

Light Blue Pigment Paste RAL 5012

eshop_002007

Kč2,242.27

Liquid Silicone HT 33 - transparent LT

eshop_710125

Liquid silicone resin for casting molds and products. It is a firmer form of silicone that, despite this, is very flexible and tear-resistant. Suitable for larger molds or for less shape-demanding molds and products. This type is also popular and sought after.

Kč1,827.20

Liquid Silicone HT 45 - transparent

eshop_710146

Liquid transparent silicone resin suitable for casting molds and products. Processing time 10 min. Demolding time 1 hour 20 minutes. Viscosity: 8,000 cPs. This type is very popular and achieves a Shore A hardness of 45 after curing.

Kč1,581.23

Liquid Silicone ZA 13 - transparent

eshop_710123

Liquid silicone resin for casting molds and products. It is a very soft type of silicone that, despite this, is very flexible and tear-resistant. Suitable for smaller molds or for geometrically demanding molds and products. This type is also obl

Kč1,803.77

Liquid Silicone ZA 22 - BLUE

eshop_710124

Liquid blue silicone resin suitable for casting molds and products. Processing time 15 min. Demolding time 1 hour. Viscosity: 5,000 cPs. This type is very popular and achieves a Shore hardness of 22 after curing. Mixing ratio 1:1 (by weight) K

Kč1,739.35

Moss Green Pigment Paste RAL 6005

eshop_002067/1

Kč2,791.31

Orange Pigment Paste RAL 2004

eshop_002009

Kč3,151.80