Release agents

FMS - pore filler

FMS - pore filler

eshop_002029/1
FMS is a pore filler for molds. It is suitable for filling the pores of molds (FMS) for molds made of fiberglass-reinforced polyester, epoxy, and other resins. It is used to fill the pores in both new molds and older molds with microporous areas and shallow surfaces.
Kč3,197.59
Formula Five - cleaner and polish 0.95 L

Formula Five - cleaner and polish 0.95 L

002046
Very effectively removes smudges and fingerprints from resin that occur during assembly, finishing work, or repairs. The product is available on order.
Kč608.32
Formula Five - release wax-1pc -340g

Formula Five - release wax-1pc -340g

eshop_002046
FORMULA FIVE- release wax for general use, which mixes carnauba wax - the most durable protection in nature - with modern polymers and hydrocarbon waxes. Silicone is added for easy application and facilitates multiple releases
Kč603.94
Frekote 700 NC - separator

Frekote 700 NC - separator

eshop_002030
Semi-permanent polymer separator for multiple use for separating all thermosets and most moldable polymers. Ensures high slip where problematic mold geometry complicates polymer processing. 700-NC cures at normal
Kč1,677.13
Frekote B 15 - base separator

Frekote B 15 - base separator

eshop_002029
The pore filler fills the micropores of molds and fills in fine scratches on their surface. When used together with other Frekote products, B-15 acts as an excellent base layer that enhances the provided separation capabilities. It is applied with a thin even layer.
Kč5,124.35
Frekote NC 770 - separator

Frekote NC 770 - separator

eshop_002055/2
Frekote separator 770-NC is a universal release agent with high slip suitable for cases where there are problems with mold geometry. It cures quickly at room temperature and creates a glossy surface on the castings. It is applied to a clean mold surface by spraying, sh
Kč1,740.81
Havel Wax 60-x3, 450g

Havel Wax 60-x3, 450g

eshop_900137
Universal release wax agent in paste form for processing polyester and epoxy\nresins.\nSuitable for models, new tools, and continuous production.\nAllows multiple demolding on established tools at temperatures up to 140°C.
Kč821.36
PVA Brush Width 45 mm

PVA Brush Width 45 mm

eshop_002025
Working part made of foam moltopren. Suitable for manual applications. Replacement working moltopren part can be ordered.
Kč155.78
PVA Separator - Coating R+G

PVA Separator - Coating R+G

eshop_002024
Separator for epoxy, vinylester, and polyester resins up to max. 100°C. To create a primary layer, use a release wax beforehand. Application can be done, for example, with a brush for applying PVA (item no. 165 110). After drying, a shiny, strong finish can be seen.
Kč609.07
PVA Separator - ECO (per 1l)

PVA Separator - ECO (per 1l)

eshop_002023/2
PVA Separator - ECO is a liquid product that prevents two materials from sticking together. It is primarily used for separating products from composite and metal molds. PVA Separator is also suitable to combine with a release base wax, which is used as
Kč277.81
PVA Separator - ECO Blue (per 1l)

PVA Separator - ECO Blue (per 1l)

eshop_002023/3
PVA Separator - ECO is a liquid product that prevents two materials from sticking together. It is primarily used for separating products from composite and metal molds. PVA Separator is also suitable for combining with a release base wax, which is used as a
Kč265.73
Separation Base Wax

Separation Base Wax

eshop_002028
Highly effective base wax for base surfaces that are not easily wettable, e.g. laminate molds, silicone, and some metals. When using GRP molds, the base wax improves the wettability of the top surface. The separator itself can then be more easily evenly
Kč529.27
Separation Wax TR 104 397g

Separation Wax TR 104 397g

eshop_002034
High-quality wax-based separator, tested in our operations. The package contains 397g. Separator TR 104 can be replaced by separator TR 216. The separator is also suitable for higher temperatures. Separator TR is not suitable as a base layer under PVA, it causes eye
Kč809.28
Separator - FREWAX

Separator - FREWAX

eshop_900043
Frewax is a separator made from wax and polymer separation agents. This combination offers users the advantages of an easily spreadable wax and a reusable semi-permanent separator. The product must be shaken continuously before and during use.
Kč1,953.11
Separator MAT ultra 41-90

Separator MAT ultra 41-90

eshop_100020/1
Separator MAT ultra 41-90 is a highly release semi-permanent separator that gives the demolded part a matte surface.\n\nApply 4-5 layers without polishing on a clean polished mold. Dry for 15 minutes between layers and then 30 minutes for complete curing.&n
Kč2,876.96
Separator QV 5110 - Vantico

Separator QV 5110 - Vantico

eshop_002032
Pasty separator based on wax containing solvents for general model building (replaces separator QZ 10). Apply the separator with a brush or cloth in a thin layer on the surface of the mold. Once the separator dries (approximately after 30 min.), polish the mold with a soft cloth.
Kč1,619.29
Separator QZ 5111 - Vantico, 0.7 kg, 3.75 kg

Separator QZ 5111 - Vantico, 0.7 kg, 3.75 kg

eshop_002031
Liquid separator based on wax containing solvents for general model building (replaces separator QZ 11). It is applied using a brush or spray gun two to three times at intervals of 10-15 minutes, allowed to dry, and always polished with a soft cloth.
Kč1,592.21
Separator RA-57

Separator RA-57

eshop_900533
Separator RA-57 is a multipurpose, liquid external release agent, based on solvents with a short drying time. The use of this product eliminates the need for repeated waxing and polishing.\nSeparator RA-57 forms a monomolecular film that adheres to the mold and
Kč1,110.37
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text