Epoxy and Polyester RESINS, HARDENERS AND GELCOATS

Showing 121-132 of 132 item(s)

Polyester Resin Polylite 32032-20

eshop_900493

It is a colorless, absolutely clear, accelerated, UV stabilized orthophthalic resin with low viscosity and reactivity. APPLICATION. Optimal curing only with Peroxide K1!! POLYLITE® 32032-20 is primarily intended for applications where extreme clarity is required.

Kč499.62

Polyester Vorgelat PC - clear, sprayable - pre-gel

900496

Vorgelat PC clear is a pre-accelerated ISO-NPG polyester gelcoat. It has been designed for combinations with epoxy laminates.\n\nIt is intended for use in the marine, construction, and transportation industries. It is also suitable for general use. It excels in resistance to water exposure.

Kč476.69

RIVERTABLE WWB Hardener

eshop_000034/1

Hardener for casting epoxy resin for creating casts with a thickness of 0-7cm. For example, pouring wooden table slabs into so-called Rivertables, etc.\n\nExcellent UV stability, clarity, colorless with the possibility of tinting using dyes and pigments

Kč723.27

Styrene for thinning polyester resins and gelcoats

eshop_000019

Styrene is one of the basic raw materials used in the production of polyester, vinylester resins, and gelcoats. It is used independently as a thinner for polyester and vinylester materials. In larger amounts, it can affect the quality and parameters of the cured

Kč245.97

Technical Acetone

eshop_010002

Very effective solvent for cleaning everything you used during laminating. It quickly dissolves polyester, epoxy, and most paints. It is very suitable for degreasing. When purchasing a 200 l drum, a refundable deposit of 1000 CZK/drum is charged for the metal drum.

Kč94.80

Thinner for epoxy spray gelcoat EG 100-W and EG 100-T

eshop_001047

Thinner for epoxy solvent-based coatings. An addition of 5-20% thinner will significantly change the viscosity of the gelcoat, making it suitable for spraying. A larger amount may significantly alter the properties of the cured gelcoat.

Kč500.72

Thinner for SF30, T 30, T 35 - MGS

eshop_000014

Manufacturer-recommended thinner for adjusting the viscosity of MGS polyester gelcoats SF 30, T 30, T 35, and T 3 PU to achieve the best results.

Kč685.20

Transparent Polyester Casting Resin

eshop_010288/1

It is a colorless, absolutely clear, accelerated, UV stabilized orthophthalic resin with low viscosity and reactivity. APPLICATION. Optimal curing only with Peroxide K1!! The transparent casting resin is primarily intended for applications where ext is required

Kč435.57

Tvrdidlo P 11 do EP 512, 531 a 371

eshop_001040

Hardener P 11 is used for curing epoxy resins in the construction industry, in the production of composites and adhesives. It is a flammable and corrosive liquid with a characteristic odor. The advantage of the hardener is its low mixing ratio, which significantly reduces costs for

Kč980.80

Two-component multipurpose adhesive Araldit AW 106(Araldit 2011)

eshop_001074/1

High-quality multipurpose adhesive with a longer processing time of approximately 120 minutes. Shear strength at 23°C (N/mm2), Tg 47°C, and operating temperature 80°C. Recommended hardener HV 953U and mixing ratio 100:80 by weight. Curing after 100 hours at 23°C.

Kč2,302.66

Vinylester Gelcoat NORPOL GM 60014 H - green molding

eshop_000020

The secret to smooth and professional molds for beautiful products. Suitable for molds laminated with polyester resin. You create the surface and details by accurately copying the model. It can be sanded and polished. Any repairs are easily feasible. Color green. dod

Kč691.79

Wax Solution 9872 3%

eshop_000033

It is used for the production of top-coats, serving to seal the final layer of the laminate as protection against UV radiation and water. The resin modified in this way does not stick after curing. 1-3% of the wax solution is added to the resin. Note, without sanding the release agent

Kč616.02