Epoxy foams

Showing 1-8 of 8 item(s)

-Kč9.49

Epoxy foam 100 (Havel)

111012

Extremely viscous foaming epoxy resin, forms very tough foams. Cures even at room temperature, temperature resistance up to 50°C. Cured in a ratio of 100:15-20 (by weight) with hardener 128 or H 30.

Kč379.46 Kč388.94

Time left

Foam 29 x 20 mm core for hockey stick repairs SRS

eshop_900135/2

Foam for hockey stick repairs. Available in various lengths, depending on the manufacturer's supply. If the lengths differ from your request, you will be contacted.

Kč122.40

-Kč293.84

Foaming agent EE 2 /HAVEL/ for epoxy foaming resins LH 100 and LH 128

111014

Foaming agent for foaming resins LH 100 and LH 128. Mixing ratio 1-5% by weight. Always mix thoroughly before combining with the hardener. The rule applies that less agent = greater bulk density and more, conversely, less bulk density and lower strength.

Kč3,134.31 Kč3,428.15

Time left

Foaming SYSTEM 5 for hockey stick repair, component A

111247

General: Component A is an epoxy resin modified with special black fillers, characterized by higher viscosity. It is suitable for foaming. Component B is a hardener, a mixture of technical polyalkylene polyamines, primarily containing diethylenetriamine, suitable for

Kč355.74

Foaming SYSTEM 5 for hockey stick repair, component B

111248

Component B is a hardener mixture of technical polyalkylene polyamines, primarily containing diethylenetriamine, suitable for the foaming system. Generally: Component A is an epoxy resin modified with special black color fillers, characterized by higher viscosity. It is suitable

Kč383.91

Foaming SYSTEM 5 for hockey stick repair, component C

111249

Component C is a foaming component. In general: Component A is an epoxy resin modified with special black color fillers, characterized by higher viscosity. It is suitable for foaming. Component B is a hardener, a mixture of technical polyalkylene polyamines, predominantly containing

Kč2,934.86

HAVELcell E1 component A

eshop_111101

The HAVELcell E1 epoxy foam is a structured epoxy resin with a specific gravity of approximately 550 kg/m3. Due to its low density, you can create a sandwich construction in your products. This material will save you time and reduce costs for your products. Part kt

Kč860.16

HAVELcell E1 component B

eshop_111102

HAVELcell E1 component B epoxy foam is a hardener for curing HAVELcell E1 component A epoxy foam in a ratio of 100:35 (by weight)

Kč1,169.82