Epoxy resins, hardeners and gelcoats

*Epoxy HAVEL*

*Hardeners HAVEL*

Epoxy resins MGS - HEXION

Hardeners MGS - HEXION

Epoxy resins R & G

Epoxy hardeners R&G

Gelcoat, paint thinners and hardener into gelcoats

Epoxy foams

Two-component epoxy adhesive

Others

Showing 1-24 of 102 item(s)

5 Minute Epoxy Adhesive Component A

eshop_001041

Professional resin primarily for bonding not only composite parts. Very suitable for manufacturing operations where it is necessary to quickly bond or fix individual parts before the actual laminating. A popular helper for more complex and demanding repairs of damage

Kč595.89

5 Minute Epoxy Adhesive Component B

eshop_001042

Hardener for 5-minute epoxy adhesive /R+G/ component B Mixing ratio 1:1 Details can be found in the R+G Handbook p.91

Kč1,997.03

Benzylalkohol

eshop_001122

Kč269.03

Clear Epoxy Gelcoat EG 100-T - for thin layers

eshop_001045

This epoxy gelcoat can be applied solely by spraying. It can also be applied as a brush coating. The secret to smooth surfaces. It creates a smooth visible layer depending on the surface of the mold. The surface does not require any further treatment after being removed from the mold.

Kč1,142.00

Epodur 619-0600 component A

eshop_001068

New epoxy resin from Spolchemie developed for laminating.

Kč636.88

Epodur 619-0600 component B

eshop_001069

Colorless hardener, suitable for casting systems or laminating with a longer processing time: approx. 4 hours.\n\nRiver table. Mixing ratio epoxy:hardener=100:40 by weight. Maximum layer 2cm. Subsequent curing required min. 50°C for 3 hours!

Kč975.09

Eporezit - T600 (slower hardener)

eshop_610032

Characteristics: it is a liquid hardener for casting epoxy resins. solvent-free Not\ntoxic. It is a modified aliphatic polyamide with low exothermic reaction and long\nprocessing time, characterized by low viscosity. T-600

Kč1,223.99

Epoxidová pryskyřice L 285 (MGS)

eshop_001007

Very high-quality resin for the aerospace industry and for model making. The resin with hardener creates a very viscous mixture, allowing the fibers to be quickly and thoroughly impregnated. As a result, the product has significantly lower weight and higher utility value. More details

Kč945.81

-Kč9.49

Epoxy foam 100 (Havel)

111012

Extremely viscous foaming epoxy resin, forms very tough foams. Cures even at room temperature, temperature resistance up to 50°C. Cured in a ratio of 100:15-20 (by weight) with hardener 128 or H 30.

Kč379.46 Kč388.94

Time left

Epoxy gelcoat 7060 clear

eshop_900882

UV stabilized transparent epoxy gelcoat for the visible layer of carbon parts, more information in TL and BL:

Kč1,541.70

Epoxy Gelcoat for Mold Production Araldit SW 404

eshop_001052

Top-quality gelcoat for mold production. Blue in color, it is known for its unmatched durability and time-tested quality. The only disadvantage is that it cannot be polished. Chemically resistant. For curing, use hardener Araldit HY 2404 in a ratio of 100:10. Curing time

Kč1,188.85

-Kč59.23

Epoxy gelcoat for mold production F 200 /MGS/

001054

Can be sanded and polished. Any repairs are easily feasible. Recommended hardener F 250, mixing ratio gelcoat: hardener= 100:25 by weight. Suitable for molds laminated with epoxy resin. After curing, it must be lightly sanded before further laminating for d

Kč631.80 Kč691.03

Time left

Epoxy Gelcoat P for Mold Production, Black

eshop_001061

Creates a solid surface and edges of molds, is polishable and has a black color. After mixing, we recommend vacuuming in a prepared bell to remove microbubbles formed during mixing. Recommended hardeners EPH 161 (VE 3261) and EPH 573 (VE 2723). The coverage is 0.5-1 kg/m2

Kč1,256.20

Epoxy gelcoat white spray EG 100-W - for thin layers

eshop_001044

A solution of medium molecular weight epoxy resin in a mixture of organic solvents with the addition of additives, white shade RAL 9003. This epoxy gelcoat can be applied solely by spraying. It can also be applied as a brush coating. The secret of smooth p

Kč1,054.15

Epoxy Resin 324 ( 371 1200 )

eshop_001037/1

Relatively inexpensive and proven resin CHS EPOXY 1200 for various applications. Characterized by high density, it is most commonly used for bonding, has good adhesion to most materials. Very tough resin. It is mixed with hardener P 11 in a ratio of 100:7 processing time

Kč398.60

Epoxy Resin 455 (formerly 512, 1505)

eshop_001038

Relatively inexpensive epoxy resin suitable for the production of molds or parts where the minimum wall thickness is 1mm or more. After curing, it usually has a milky color. It is mixed with hardener P 11 in a ratio of 100:10 with a working time of 100g/20°C 15-20 min. Or with hardeners

Kč514.63

Epoxy Resin C

eshop_001029

Chemically resistant epoxy resin. Used in the construction of tanks, cisterns, and pipelines. Due to its parameters, it is suitable and often used in the production of fiberglass fuel tanks. The resin is quite thick, so it is advisable to preheat it before impregnating the fibers.

Kč622.97

Epoxy Resin Defoamer

610017

Epoxy Resin Defoamer Approximately 0.1-0.5% of defoamer is added to the epoxy system for easier bubble release.

Kč328.71

Epoxy Resin L

eshop_001025

Epoxy resin suitable for impregnating glass, aramid, and carbon fibers and fabrics. With recommended hardeners, it creates a laminating system that has good adhesion to wood, steel materials, polystyrene, and other similar materials. Recommended t

Kč840.39

Epoxy Resin L 20

eshop_001027

Resin L 20 is a laminating resin suitable for most processes for laminating primarily in the aerospace industry. Epoxy resin for saturating glass, aramid, and carbon fibers. It bonds wood, metals, styrofoam, etc. It is suitable for manual lamination.

Kč1,048.73

Epoxy Resin LH 1000

eshop_111068

Denser epoxy resin suitable for bonding, casting, pouring, and when heated to 35°C and above also suitable for laminating and injection into warm molds, production of polymer concrete and adhesives. Hardener 133-138 (MGS) can be used in the mixing ratio of resin:hardener

Kč447.28

Epoxy Resin LH 130

eshop_111039

Standard resin of medium viscosity based on bisphenol A with reduced crystallization ability. For curing at room temperature from 10-30°C. Used for boat building, sports equipment, model aircraft, molds, tools, adhesives, and castings. Viscosity

Kč522.68

Epoxy Resin LH 145

eshop_111026

Epoxy resin suitable for the production of sports equipment, boats, and automotive parts. It is particularly suitable for manufacturing using glass, carbon, and aramid fibers. Hardener 133-138 (MGS) can be used in a mixing ratio of resin:hardener 100:35 by weight or harden

Kč450.21

Epoxy Resin LH 160 /HAVEL/

eshop_111020

This is a laminating resin with medium viscosity that does not contain solvents or fillers, intended for processing and curing at room temperature. Suitable for the production of parts reinforced with glass, carbon, and aramid fibers, its features are

Kč505.11