Auxiliary material

Showing 1-12 of 33 item(s)

3-piece pins for molds 5/8 mm (1 pack 3 pcs)

eshop_010141/1

Metal pins for precise positioning of multi-part molds. The advantage of these pins is that they can be removed from the metal insert in the parting line at any time and do not interfere during separation. Suitable in combination with bushings for mold clamping with screws.

Kč141.87

Activated Carbon MAC6D40

eshop_010118

Activated carbon is used as a filler for filters for air and water filtration. This material will ensure the filtration of contaminated air from your laminating or painting shop when used correctly.

Kč216.69

Bushings for precise mold clamping without threads (grooved) M6 - FIX -A - FORM (R+G)

eshop_010136/1

These special nuts connected by a screw through the bushing ensure easy and precise tightening of molds together and create a perfect joint. The nuts are positioned during the mold manufacturing process in the desired locations in the parting plane and are secured against pull-out with thin glass fibers.

Kč37.92

Compressed Sponge

eshop_010324

An excellent helper for underwater sanding. Very absorbent sponge gentle on surfaces. Delivered in a compressed state and expands after soaking in water.

Kč104.68

Filament 160 - polypropylene tape 20 mm, 160°C (roll 1000m)

eshop_900331

Thin polypropylene tape designed not only for the production of tubes and other profiles (binding materials to the mandrel), but also for repairs. Even though the tape is very thin, it can exert a great pressure on the product and thus squeeze out excess resin. We supply it in width

Kč889.44

Filler Clay - Putty (EXTRA SOFT)

eshop_010256/9

Filler clay - putty is a material suitable for minor repairs and adjustments of molds and models. With this material, you can easily and quickly repair chipped edges of molds or perfectly fill gaps in the separating planes of multi-part molds. This material is thermally in

Kč244.80

Filling Clay - Putty

eshop_010256

Filling clay - putty is a material suitable for minor repairs and adjustments of molds and models. With this material, you can easily and quickly repair chipped edges of molds or very perfectly seal gaps in the separating planes of multi-part molds. This material is thermally in

Kč801.59

Metal pins for precise positioning of molds diameter 6/4mm.

010133

great tool for joining laminated parts that are still in molds and the final glue seam must be as thin as possible. The pins are positioned during the mold manufacturing process in the desired locations on the parting plane and ensure against tearing with thin glass fibers saturated

Kč42.69

Peel Ply Fabric 50 g/m2, PLUS, width 152cm white

eshop_010003

A great helper not only for vacuuming. WIDTH 152 cm. The same peel ply fabric 50 with a special surface treatment for easier removal. A significant advantage especially for more complex products and for larger amounts of extracted resin. The advantage of this modified peel ply

Kč182.72

peroxide dispenser - Dosimeter 1000ml

eshop_010176/3

Great tool (see picture - larger, oval container) for easy dosing of peroxide into polyester and vinylester resins as well as gelcoats. The work is made easier primarily by the very practical and adjustable plastic straw with an opening. You can set the dispenser according to the

Kč869.68

Peroxide Dispenser - Dosimeter 500ml

eshop_010176

A great tool (smaller square type - see image) for easy dosing of peroxide into polyester and vinylester resins as well as gelcoats. The work is made easier primarily by a very practical and adjustable plastic straw with an opening. You can set the dispenser according to your needs

Kč790.61

Polishing Paste White RIWAX

eshop_010378

High-quality polishing paste popular and tested in our workshops. Silicone-free. For final polishing, use Riwax green paste.

Kč790.61